scholarly journals Characteristics of Microstructure Evolution during FAST Joining of the Tungsten Foil Laminate

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 886
Author(s):  
Xiaoyue Tan ◽  
Wujie Wang ◽  
Xiang Chen ◽  
Yiran Mao ◽  
Andrey Litnovsky ◽  
...  
Keyword(s):  
Critical Current ◽  
Current Density ◽  
High Current Density ◽  
Operation Mode ◽  
Sharp Peak ◽  
Advanced Materials ◽  
Peak Current ◽  
Tungsten Foil ◽  
Field Assisted Sintering ◽  
Joining Process

The tungsten (W) foil laminate is an advanced material concept developed as a solution for the low temperature brittleness of W. However, the deformed W foils inevitably undergo microstructure deterioration (crystallization) during the joining process at a high temperature. In this work, joining of the W foil laminate was carried out in a field-assisted sintering technology (FAST) apparatus. The joining temperature was optimized by varying the temperature from 600 to 1400 °C. The critical current for mitigating the microstructure deterioration of the deformed W foil was evaluated by changing the sample size. It is found that the optimal joining temperature is 1200 °C and the critical current density is below 418 A/cm2. According to an optimized FAST joining process, the W foil laminate with a low microstructure deterioration and good interfacial bonding can be obtained. After analyzing these current profiles, it was evident that the high current density (sharp peak current) is the reason for the significant microstructure deterioration. An effective approach of using an artificial operation mode was proposed to avoid the sharp peak current. This study provides the fundamental knowledge of FAST principal parameters for producing advanced materials.

scholarly journals Sharp peak of the critical current density in BaFe2−xNixAs2 at optimal composition

2020 ◽  
Vol 101 (23) ◽  
Author(s):  
Derrick Van Gennep ◽  
Abdelwahab Hassan ◽  
Huiqian Luo ◽  
Mahmoud Abdel-Hafiez
Keyword(s):  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Sharp Peak ◽  
Optimal Composition

Growth of thick Yba2Cu3O7−δ films carrying a critical current of over 230 A/cm on single LaMnO3-buffered ion-beam assisted deposition MgO substrates

2003 ◽  
Vol 18 (9) ◽  
pp. 2055-2059 ◽  
Author(s):  
M. Paranthaman ◽  
T. Aytug ◽  
D. K. Christen ◽  
P. N. Arendt ◽  
S. R. Foltyn ◽  
...  
Keyword(s):  
Critical Current ◽  
Current Density ◽  
Ybco Film ◽  
High Current Density ◽  
Ion Beam ◽  
Coated Conductors ◽  
High Current ◽  
Ion Beam Assisted Deposition ◽  
Ni Alloy ◽  
Ybco Coated Conductors

A single LaMnO3 buffer layer was developed for the growth of superconducting thick YBa2Cu3O7−δ (YBCO) films on polycrystalline Ni-alloy substrates where a biaxially textured MgO layer, produced by ion-beam assisted deposition (IBAD), was used as a template. Using pulsed laser deposition, a 1.65-μm-thick YBCO film with a critical current density of 1.4 × 106 A/cm2 in self field at 75 K was achieved on sputtered LaMnO3-buffered IBAD MgO substrates. This corresponds to a critical current (Ic) of 231 A/cm-width. This result demonstrates the possibility of using both LaMnO3 buffer and IBAD MgO template for producing high current density YBCO-coated conductors.

scholarly journals A membrane-free flow electrolyzer operating at high current density using earth-abundant catalysts for water splitting

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xiaoyu Yan ◽  
Jasper Biemolt ◽  
Kai Zhao ◽  
Yang Zhao ◽  
Xiaojuan Cao ◽  
...  
Keyword(s):  
Water Splitting ◽  
Current Density ◽  
Proton Exchange Membrane ◽  
Hydrogen Generation ◽  
High Current Density ◽  
Tap Water ◽  
Operation Mode ◽  
Proton Exchange ◽  
Free Flow ◽  
Low Efficiency

AbstractElectrochemical water splitting is one of the most sustainable approaches for generating hydrogen. Because of the inherent constraints associated with the architecture and materials, the conventional alkaline water electrolyzer and the emerging proton exchange membrane electrolyzer are suffering from low efficiency and high materials/operation costs, respectively. Herein, we design a membrane-free flow electrolyzer, featuring a sandwich-like architecture and a cyclic operation mode, for decoupled overall water splitting. Comprised of two physically-separated compartments with flowing H2-rich catholyte and O2-rich anolyte, the cell delivers H2 with a purity >99.1%. Its low internal ohmic resistance, highly active yet affordable bifunctional catalysts and efficient mass transport enable the water splitting at current density of 750 mA cm−2 biased at 2.1 V. The eletrolyzer works equally well both in deionized water and in regular tap water. This work demonstrates the opportunity of combining the advantages of different electrolyzer concepts for water splitting via cell architecture and materials design, opening pathways for sustainable hydrogen generation.

Microstructural characterization of YBa2Cu3O7-x thin films formed by metalorganic CVD

1991 ◽  
Vol 49 ◽  
pp. 1080-1081
Author(s):  
P. Lu ◽  
W. Huang ◽  
C.S. Chern ◽  
Y.Q. Li ◽  
J. Zhao ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Film Growth ◽  
Chemical Vapor ◽  
Microstructural Characterization ◽  
Ion Milling ◽  
Conventional Grinding

The YBa2Cu3O7-x thin films formed by metalorganic chemical vapor deposition(MOCVD) have been reported to have excellent superconducting properties including a sharp zero resistance transition temperature (Tc) of 89 K and a high critical current density of 2.3x106 A/cm2 or higher. The origin of the high critical current in the thin film compared to bulk materials is attributed to its structural properties such as orientation, grain boundaries and defects on the scale of the coherent length. In this report, we present microstructural aspects of the thin films deposited on the (100) LaAlO3 substrate, which process the highest critical current density.Details of the thin film growth process have been reported elsewhere. The thin films were examined in both planar and cross-section view by electron microscopy. TEM sample preparation was carried out using conventional grinding, dimpling and ion milling techniques. Special care was taken to avoid exposure of the thin films to water during the preparation processes.

Microstructure Development in a High Current Density NbTi Superconducting Composite

1985 ◽  
Vol 43 ◽  
pp. 186-189
Author(s):  
P. J. Lee ◽  
D. C. Larbalestier
Keyword(s):  
Current Density ◽  
High Current Density ◽  
Cold Drawing ◽  
Heat Treatments ◽  
Grain Structure ◽  
Fine Grain ◽  
Boundary Film ◽  
Quantitative Basis ◽  
Cold Worked ◽  
Very High

Several features of the metallurgy of superconducting composites of Nb-Ti in a Cu matrix are of interest. The cold drawing strains are generally of order 8-10, producing a very fine grain structure of diameter 30-50 nm. Heat treatments of as little as 3 hours at 300 C (∼ 0.27 TM) produce a thin (1-3 nm) Ti-rich grain boundary film, the precipitate later growing out at triple points to 50-100 nm dia. Further plastic deformation of these larger a-Ti precipitates by strains of 3-4 produces an elongated ribbon morphology (of order 3 x 50 nm in transverse section) and it is the thickness and separation of these precipitates which are believed to control the superconducting properties. The present paper describes initial attempts to put our understanding of the metallurgy of these heavily cold-worked composites on a quantitative basis. The composite studied was fabricated in our own laboratory, using six intermediate heat treatments. This process enabled very high critical current density (Jc) values to be obtained. Samples were cut from the composite at many processing stages and a report of the structure of a number of these samples is made here.

Facet Topography and Dislocation Structure as a Possible Source for Electrical Heterogeneity in [001] TILT Bicrystals of YBa2Cu3O7-δ

1996 ◽  
Vol 54 ◽  
pp. 338-339
Author(s):  
I-Fei Tsu ◽  
D.L. Kaiser ◽  
S.E. Babcock
Keyword(s):  
Grain Boundary ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Electromagnetic Properties ◽  
Length Scale ◽  
Density Values ◽  
Current Densities ◽  
Applied Fields ◽  
A Current

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.

Sign in / Sign up

Export Citation Format

Share Document