A Dual Band, Dual Polarized Slot Antenna Using Coplanar Waveguide

Author(s):  
Mohammad Imroz Khan ◽  
Avinash Chandra ◽  
Sushrut Das
2014 ◽  
Vol 68 (1) ◽  
Author(s):  
Sahar Chagharvand ◽  
M. R. B. Hamid ◽  
M. R. Kamarudin ◽  
Mohsen Khalily

This paper presents a single layer planar slot antenna for dual band operation. The antenna is fed by a coplanar waveguide (CPW) with two inverted C-shaped resonators to achieve the dual band operation. The impedance bandwidth for ǀS11ǀ < -10dB is 14% in lower band and 7% in higher band. The antenna prototype’s electromagnetic performance, impedance bandwidth, radiation pattern, and antenna gain were measured. The proposed configuration offers a relatively compact, easy to fabricate and dual band performance providing gain between 2 and 4 dBi. The designed antenna has good dual bandwidth covering 3.5 WiMAX and 5.8 WLAN tasks. Experimental and numerical results also showed good agreement after comparison.


2014 ◽  
Vol 50 (19) ◽  
pp. 1338-1340 ◽  
Author(s):  
H.W. Liu ◽  
X. Zhan ◽  
S. Li ◽  
J.H. Lei ◽  
F. Qin

2020 ◽  
Vol 19 (1) ◽  
pp. 213-217 ◽  
Author(s):  
Kin-Lu Wong ◽  
Hsuan-Jui Chang ◽  
Chung-Ying Wang ◽  
Shao-Yu Wang

2017 ◽  
Vol 9 (8) ◽  
pp. 1695-1703
Author(s):  
Haixiong Li ◽  
Yunlong Gong ◽  
Jiakai Zhang ◽  
Jun Ding ◽  
Chenjiang Guo

In this paper, a coplanar waveguide (CPW)-fed dual-band uniplanar tri-polarization reconfigurable antenna based on the PIN diode switch is proposed. The proposed antenna can be reconfigured between the linear polarization (LP) and the circular polarization (CP) mode, including both the right-handed circular polarization and left-handed circular polarization simultaneously within the dual operating bands. The central frequencies of the bands are 2.63 and 4.42 GHz, respectively, and the overlapped operating bandwidth is 17.8 and 3.40%. The proposed reconfigurable antenna is a closed-slot antenna fed by the CPW transmission line and the reconfigurable mechanism is to regulate the T-shaped driven stub through switching the PIN diodes on and off. The scattering parameters, axial ratio, radiation pattern, gain, and the radiation efficiency of the proposed antenna are all investigated in the following. The optimized antenna has been fabricated to experimental test, the simulated and the measured results agree well with each other. The lower frequency band of the proposed antenna covers the 2.40 GHz WLAN specification and the upper band can be used for the 5 G communication (4.40–4.50 GHz); therefore it is suitable to be applied in the mobile wireless communication.


Author(s):  
M. Z. A. Abd Aziz ◽  
M. M. Shukor ◽  
M. K. Suaidi ◽  
B. H. Ahmad ◽  
M. A. Othman ◽  
...  

Author(s):  
Jitendra Vaswani

This paper presents a two-element dual-band MIMO antenna with dual-polarization for 5G user equipment. Both operating frequencies are of sub-6 GHz band centered at 3.6 GHz and 5.5 GHz respectively and are independent of each other. Antenna polarizations depend on the placement of the feed elements on the PCB. The antenna is designed on FR-4 substrate to ensure its easy availability and keeping it cost-effective. The resultant radiation pattern of the antenna set is bi-directional with good gain and efficiency.


Sign in / Sign up

Export Citation Format

Share Document