Type Synthesis of 5-DOF 3R2T Parallel Mechanism

2019 ◽  
pp. 73-85
Author(s):  
Qinchuan Li ◽  
Jacques M. Hervé ◽  
Wei Ye
Keyword(s):  
Parallel Mechanism ◽  
Type Synthesis

scholarly journals Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

2019 ◽  
Vol 32 (1) ◽  
Author(s):  
Haitao Liu ◽  
Ke Xu ◽  
Huiping Shen ◽  
Xianlei Shan ◽  
Tingli Yang
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Analytic Solutions ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Real Time Control ◽  
Time Control ◽  
Topological Characteristics ◽  
Zero Coupling

Abstract Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest. Based on this purpose, this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism. With the aid of the theory of mechanism topology, the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented, which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism. Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed, resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree. One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics. The process of type synthesis is in the order of permutation and combination; therefore, there are no omissions. This method is also applicable to other configurations, and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

Type Synthesis of a 1T Symmetric Coupling Mechanism with the Method of Separation and Merger

2014 ◽  
Vol 635-637 ◽  
pp. 1290-1293
Author(s):  
Shou Li Zhang ◽  
Jing Fang Liu ◽  
Yue Qing Yu
Keyword(s):  
Linear Combination ◽  
Parallel Mechanism ◽  
Creative Design ◽  
Coupling Mechanism ◽  
Type Synthesis ◽  
Structural Synthesis ◽  
Hybrid Mechanism ◽  
Coupled Structures ◽  
Coupling Mechanisms

The structural synthesis is the primary and the most important issue in the process of mechanism creative design. In the paper, Firstly, select a 1T symmetric parallel mechanism, and the constraint and mobility of the branches can be analyzed. With the method of linear combination of the screws, the new branches are constructed. Then, using the measure of separation and merger, parts of the limbs of the parallel mechanism can be replaced by equivalent coupled structures, so corresponding symmetric coupling mechanisms with equal mobility are synthesized. Finally, solving the constraint screws of the branch of the coupling mechanism, in order to prove the hybrid mechanism is full-cycle or not.

A Systematical Approach for Structure Synthesis of Parallel Mechanisms Based on Single-Open-Chain Modules and Its Application

2009 ◽  
Author(s):  
Ting-Li Yang ◽  
An-Xin Liu ◽  
Qiong Jin ◽  
Yu-Feng Luo ◽  
Lu-Bin Hang ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Systematic Approach ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Open Chain ◽  
Structure Synthesis ◽  
Vector Algebra ◽  
Algebra Theory ◽  
Position And Orientation

Based on previous research results presented by authors, this paper proposes a novel systematic approach for structure synthesis of all parallel mechanisms (excluding Bennett mechanism etc), which is totally different from the approaches based on screw theory and based on displacement subgroup. Main characteristics of this approach are: (a) the synthesized mechanisms are non-instantaneous ones, and (b) only simple mathematical tools (vector algebra, theory of sets, etc.) are used. Main steps of this approach include: (1) Determining functional and structural requirements of the parallel mechanism to be synthesized, such as position and orientation characteristic (POC) matrix, degree of freedom (DOF), etc. (2) Type synthesis of branches. (3) Assembling of branches (determining the geometry constraint conditions among the branches attached between the moving platform and the frame, and checking the DOF). (4) Identifying the inactive joints. (5) Selecting the actuating joints. In order to illustrate the whole procedure, the type synthesis of spherical parallel mechanisms is studied using this approach.

Type synthesis of 2R2T parallel mechanisms based on motion equivalent chain method

2014 ◽  
Vol 228 (17) ◽  
pp. 3209-3217 ◽  
Author(s):  
Wei Ye ◽  
Yuefa Fang ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Constraint Force ◽  
Single Loop ◽  
Loop Chain ◽  
Serial Chains

In this paper, the motion equivalent chain method is proposed and then applied to the type synthesis of a class of 2R2T parallel mechanism. The equivalent serial chains are synthesized for a specific 2R2T motion pattern based on screw theory. Feasible limb structures that provide a constraint couple and a constraint force are enumerated according to the reciprocity of the twist and wrench systems. Several motion equivalent single loop chains are constructed with the equivalent serial chains. Using motion equivalent single loop chains to replace the equivalent serial chains, a class of 2R2T parallel mechanisms is obtained based on the foundation of motion equivalent single loop chain structures.

Type Synthesis of Parallel Mechanisms With Multiple Operation Modes

2006 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin ◽  
Pierre-Luc Richard
Keyword(s):  
Parallel Mechanism ◽  
Translational Motion ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Operation Modes ◽  
Multiple Operation ◽  
Spherical Motion ◽  
General Method

There are usually several motion patterns having the same DOF (degree of freedom). For example, planar motion, spherical motion, and spatial translation are motion patterns with 3-DOF. An f-DOF parallel mechanism with multiple operation modes is a parallel mechanism that can generate different motion patterns with f DOF. Up to now, no method has been proposed for the type synthesis of parallel mechanisms with multiple operation modes. This paper presents a general method for the type synthesis of parallel mechanisms with multiple operation modes. Using the proposed approach, 3-DOF parallel mechanisms with both spherical and translational modes, i.e., parallel mechanisms generating both the spherical motion pattern and the spatial translational motion pattern, are generated systematically. A large number of parallel mechanisms with both spherical and translational modes are obtained.

scholarly journals Type synthesis and kinematics analysis of a family of three translational and one rotational pick-and-place parallel mechanisms with high rotational capability

2019 ◽  
Vol 11 (6) ◽  
pp. 168781401985307
Author(s):  
Xing Zhang ◽  
Dejun Mu ◽  
Yuze Liu ◽  
Jie Bi ◽  
Hongrui Wang
Keyword(s):  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Hessian Matrix ◽  
Parallel Mechanisms ◽  
Kinematics Analysis ◽  
Type Synthesis ◽  
Lie Group Theory ◽  
Revolute Joints ◽  
Pick And Place ◽  
Pick And Place Operation

This article proposes a family of spatial three translational and one rotational parallel mechanisms (PMs) for pick-and-place operation. Their features are one independent rotation of the mechanism with four identical limbs, which are provided by the four revolute joints on the moving platform. The rotational capability of the PMs has a range of at least 180°. This article focuses on the synthesis of the PMs and kinematics analysis of the 4- P(2-SS)R parallel mechanism. First, based on the Lie group theory, three parallelograms are used in designing the PMs. The limbs are listed and two types of three translational and one rotational PMs are synthesized. Then, a typical 4- P(2-SS)R PM is selected, the 6 × 6 Jacobian matrix and the 6 × 6 × 6 Hessian matrix of the mechanism are derived for solving the displacement, velocity, and acceleration of the mechanism. Finally, singularity configurations are disclosed from the 6 × 6 Jacobian matrix, and the workspace of the mechanism is provided to illustrate the high rotational capability.

Sign in / Sign up

Export Citation Format

Share Document