Type Synthesis of Three Degrees of Freedom Rotational Generalized Decoupling Parallel Mechanism

2017 ◽  
Vol 53 (3) ◽  
pp. 17
Author(s):  
Daxing ZENG
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Type Synthesis ◽  
Three Degrees Of Freedom

Architecture Optmization of a 3-DOF Parallel Mechanism

1998 ◽  
Author(s):  
J. A. Carretero ◽  
R. P. Podhorodeski ◽  
M. Nahon
Keyword(s):  
Parallel Mechanism ◽  
Architectural Design ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Design Parameters ◽  
Objective Functions ◽  
Constraint Equations ◽  
Three Degree Of Freedom ◽  
Architecture Optimization ◽  
Three Degrees Of Freedom

Abstract This paper presents a study of the architecture optimization of a three-degree-of-freedom parallel mechanism intended for use as a telescope mirror focussing device. The construction of the mechanism is first described. Since the mechanism has only three degrees of freedom, constraint equations describing the inter-relationship between the six Cartesian coordinates are given. These constraints allow us to define the parasitic motions and, if incorporated into the kinematics model, a constrained Jacobian matrix can be obtained. This Jacobian matrix is then used to define a dexterity measure. The parasitic motions and dexterity are then used as objective functions for the optimizations routines and from which the optimal architectural design parameters are obtained.

Kinematics and Workspace Analysis of 3-RPP Parallel Mechanism

2013 ◽  
Vol 456 ◽  
pp. 146-150
Author(s):  
Zhi Jiang Xie ◽  
Jun Zhang ◽  
Xiao Bo Liu
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Parallel Mechanisms ◽  
Vector Method ◽  
Workspace Analysis ◽  
Inverse Solutions ◽  
Three Degrees Of Freedom

This paper designed a kind of parallel mechanism with three degrees of freedom, the freedom and movement types of the robot are analyzed in detail, the parallel mechanisms Kinematics positive and inverse solutions are derived through using the vector method. And at last its workspace is analyzed and studied systematically.

scholarly journals A Translational Three-Degrees-of-Freedom Parallel Mechanism With Partial Motion Decoupling and Analytic Direct Kinematics

2020 ◽  
Vol 12 (2) ◽  
Author(s):  
Huiping Shen ◽  
Damien Chablat ◽  
Boxiong Zeng ◽  
Ju Li ◽  
Guanglei Wu ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Design Theory ◽  
Degrees Of Freedom ◽  
Analytic Solutions ◽  
Inverse Kinematic ◽  
Kinematic Modeling ◽  
Topological Design ◽  
Prismatic Joints ◽  
Topological Characteristics ◽  
Three Degrees Of Freedom

Abstract According to the topological design theory and the method of parallel mechanism (PM) based on position and orientation characteristic (POC) equations, this paper studied a three-degrees-of-freedom (3-DOF) translational PM that has three advantages, i.e., (i) it consists of three fixed actuated prismatic joints, (ii) the PM has analytic solutions to the direct and inverse kinematic problems, and (iii) the PM is of partial motion decoupling property. First, the main topological characteristics, such as the POC, degree-of-freedom, and coupling degree, were calculated for kinematic modeling. Thanks to these properties, the direct and inverse kinematic problems can be readily solved. Further, the conditions of the singular configurations of the PM were analyzed, which corresponds to its partial motion decoupling property.

scholarly journals Input Rationality Analysis of Three Degree of freedom Parallel Mechanism with Limbs of Embedding Structures

2019 ◽  
Vol 10 (2) ◽  
pp. 343-353
Author(s):  
Gaowei Yang ◽  
Jianjun Zhang ◽  
Weimin Li ◽  
Kaicheng Qi
Keyword(s):  
Parallel Mechanism ◽  
Group Selection ◽  
Degrees Of Freedom ◽  
Selection Rule ◽  
Direct Application ◽  
Input Selection ◽  
Selection Theory ◽  
Coupling Relationship ◽  
Three Degree Of Freedom ◽  
Three Degrees Of Freedom

Abstract. Three degrees of freedom (3-DoF) parallel mechanism (PM) with limbs of embedding structures is a kind of PM with a coupling relationship between limbs. In order to obtain a more desirable motion, the analysis of its actuated pairs shall be conducted. However, the fact that the existence of limbs coupling results in non-unique limb group, this mechanism has multiple limb groups. In this regard, the traditional input selection theory is not suitable for direct application in the input rationality analysis. Aiming to avoid this, a general extended input selection theory and limb group selection rule are proposed. The former tackles the traditional input selection theory which is not suitable for analyzing the input of PM with limbs of embedding structures since it does not take the influence of group into consideration, whereas the latter makes the calculation of the former easier. Based on the extended input selection theory and the limb group selection rule, the input and configuration of the 3-DoF PM with limbs of embedding structures are improved.

scholarly journals A novel multiple working modes parallel mechanism with variable workspace

2018 ◽  
Vol 234 (1) ◽  
pp. 211-224
Author(s):  
Dian Li ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Trajectory Planning ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Forward Kinematics ◽  
3D Printer ◽  
Determination Method ◽  
Jacobian Matrices ◽  
Three Degrees Of Freedom

In this paper, a novel three-degrees-of-freedom multiple working modes parallel mechanism with variable workspace is proposed. Several studies including kinematic and prescribed trajectory planning are performed. First, the degrees of freedom of mechanism's two working modes are calculated based on screw theory. A prototype made by 3D printer also has been developed. Then, the inverse/forward kinematics and Jacobian matrices are obtained. The workspace and singularity are also analyzed, which show that the proposed parallel mechanism possesses singularity-free internal workspace. Finally, a working mode determination method is presented, which can be used to obtain suitable workspace in order to fully contain a prescribed trajectory. An example trajectory is used to verify the reasonability of the proposed method.

Investigations on the principle of full decoupling and type synthesis of 2R1T and 2R parallel mechanisms

2019 ◽  
Vol 43 (2) ◽  
pp. 263-271 ◽  
Author(s):  
Yundou Xu ◽  
Bei Wang ◽  
Zhifeng Wang ◽  
Yun Zhao ◽  
Wenlan Liu ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Rotational Degrees Of Freedom ◽  
The Relationship

Based on the relationship between constraint wrenches and rotational axes, the principle of full decoupling of two rotational degrees of freedom (DOFs) for a two-rotation and one-translation (2R1T) parallel mechanism and two-rotation (2R) parallel mechanism with three supporting branches is systematically analyzed. Two conditions for full decoupling of two rotational DOFs of such mechanisms are obtained. The relationship between the two rotational axes of the parallel mechanisms is classified into two cases: intersecting and different. Next, based on the two conditions, type synthesis of the 2R1T and 2R parallel mechanisms with fully decoupled two rotational DOFs is carried out. A series of novel 2R1T and 2R parallel mechanisms with fully decoupled two rotational DOFs are obtained, such as RPU–UPR–RPR. Several of these mechanisms contain only eight single-DOF passive joints, one fewer than in existing mechanisms of this type, and thus have broad applications.

Sign in / Sign up

Export Citation Format

Share Document