Predictive Analysis of Wind Turbine Output Power Using Support Vector Machine(SVM) Based on Genetic Algorithm(GA)

Author(s):  
Tushar Srivastava ◽  
M. M. Tripathi
2013 ◽  
Vol 846-847 ◽  
pp. 620-623
Author(s):  
Wen Qing Zhao ◽  
Rui Cai ◽  
Li Wei Wang ◽  
De Wen Wang

Gearbox affect the normal operation of the wind turbines, to study the fault diagnosis, support vector method was used. Parameters selection is very important and decides the fault diagnosis precision. In order to overcome the blindness of man-made choice of the parameters in least squares support vector machine (LSSVM) and improve the accuracy and efficiency of fault diagnosis, a method based on LSSVM trained by genetic algorithm was proposed. This method searches the optimized parameters in LSSVM by taking advantage of the genetic algorithms powerful global searching ability. The research is provided using this method on the fault diagnosis of wind turbine gearbox and compared with the diagnostic method of LSSVM. The experimental results show that the method achieves a higher diagnostic accuracy.


Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 212
Author(s):  
Yu-Wei Liu ◽  
Huan Feng ◽  
Heng-Yi Li ◽  
Ling-Ling Li

Accurate prediction of photovoltaic power is conducive to the application of clean energy and sustainable development. An improved whale algorithm is proposed to optimize the Support Vector Machine model. The characteristic of the model is that it needs less training data to symmetrically adapt to the prediction conditions of different weather, and has high prediction accuracy in different weather conditions. This study aims to (1) select light intensity, ambient temperature and relative humidity, which are strictly related to photovoltaic output power as the input data; (2) apply wavelet soft threshold denoising to preprocess input data to reduce the noise contained in input data to symmetrically enhance the adaptability of the prediction model in different weather conditions; (3) improve the whale algorithm by using tent chaotic mapping, nonlinear disturbance and differential evolution algorithm; (4) apply the improved whale algorithm to optimize the Support Vector Machine model in order to improve the prediction accuracy of the prediction model. The experiment proves that the short-term prediction model of photovoltaic power based on symmetry concept achieves ideal accuracy in different weather. The systematic method for output power prediction of renewable energy is conductive to reducing the workload of predicting the output power and to promoting the application of clean energy and sustainable development.


Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1228
Author(s):  
Xuwei Wang ◽  
Zhaojie Li ◽  
Yanlei Zhang

The stratospheric airship is a kind of aircraft that completely relies on the cycle of photovoltaic energy systems to achieve long duration flight. The accurate estimation of the operating temperature of solar cell modules on stratospheric airship is extremely important for the design of photovoltaics system (PV system), the output power calculation of PV system, and the calculation of energy balance. However, the related study has been rarely reported. A support vector machine prediction method based on particle swarm optimization algorithm (PSO-SVM) was established to predict the operating temperature of solar cell modules on stratospheric airship. The PSO algorithm was used to dynamically optimize the SVM’s parameters between the operating temperature of the solar cell modules and the measured data such as atmospheric pressure, solar radiation intensity, flight speed, and ambient temperature. The operating temperature data of the two sets of solar cell modules measured in the flight test were used to verify the accuracy of the temperature prediction model, and the prediction results were compared with a back propagation neural network (BPNN) method and the simulation results calculated by COMSOL Multiphysics of COMSOL, Inc., Columbus, MA, USA. The results shown that the PSO-SVM model realized the accurate prediction of the operating temperature of solar cell modules on stratospheric airship, which can guide the design of PV system, the output power calculation of PV system, and the calculation of energy balance.


2011 ◽  
Vol 6 (11) ◽  
pp. 1367-1376 ◽  
Author(s):  
Yu Yao ◽  
Tao Zhang ◽  
Yi Xiong ◽  
Li Li ◽  
Juan Huo ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document