Recycling Potential of Sugarcane Biomass Ash as an Improved Pozzolanic Binder and Sustainable Masonry Product

Author(s):  
Vasudha D. Katare ◽  
Mangesh V. Madurwar
2018 ◽  
Vol 63 (2) ◽  
pp. 39-52
Author(s):  
Daniela Violeta Dumitrescu ◽  
◽  
Vasile Soare ◽  
Ionuţ Constantin ◽  
Marian Burada ◽  
...  

2014 ◽  
Vol 22 (2) ◽  
pp. 171-176
Author(s):  
Kan WANG ◽  
Zifang WANG ◽  
Ming GAO ◽  
Yaohua HUANG ◽  
Xiaofei HAN ◽  
...  

2020 ◽  
Vol 70 (12) ◽  
pp. 4594-4600

The purpose of this study was to characterize some types of biomass wastes resulted from different activities such as: agriculture, forestry and food industry using thermogravimetric and ICP-MS analyses. Also, it was optimized an ICP-MS method for the determination of As, Cd and Pb from biomass ash samples. The ICP-MS analysis revealed that the highest concentration of metals (As, Cd, Pb) was recorded in the wood waste ash sample, also the thermogravimetric analysis indicated that the highest amount of ash was obtained for the same sample (26.82%). The biomass wastes mentioned in this study are alternative recyclable materials, reusable as pellets and briquettes. Keywords: ash, biomass, ICP-MS, minor elements, TG


Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1092
Author(s):  
Hengli Zhang ◽  
Chunjiang Yu ◽  
Zhongyang Luo ◽  
Yu’an Li

The circulating fluidized bed (CFB) boiler is a mainstream technology of biomass combustion generation in China. The high flue gas flow rate and relatively low combustion temperature of CFB make the deposition process different from that of a grate furnace. The dynamic deposition process of biomass ash needs further research, especially in industrial CFB boilers. In this study, a temperature-controlled ash deposit probe was used to sample the deposits in a 12 MW CFB boiler. Through the analysis of multiple deposit samples with different deposition times, the changes in micromorphology and chemical composition of the deposits in each deposition stage can be observed more distinctively. The initial deposits mainly consist of particles smaller than 2 μm, caused by thermophoretic deposition. The second stage is the condensation of alkali metal. Different from the condensation of KCl reported by most previous literatures, KOH is found in deposits in place of KCl. Then, it reacts with SO2, O2 and H2O to form K2SO4. In the third stage, the higher outer layer temperature of deposits reduces the condensation rate of KOH significantly. Meanwhile, the rougher surface of deposits allowed more calcium salts in fly ash to deposit through inertial impact. Thus, the elemental composition of deposits surface shows an overall trend of K decreasing and Ca increasing.


2021 ◽  
Vol 295 ◽  
pp. 126358
Author(s):  
Binxian Gu ◽  
Xinyi Tang ◽  
Lingxuan Liu ◽  
Yuanyuan Li ◽  
Takeshi Fujiwara ◽  
...  

2021 ◽  
Vol 150 ◽  
pp. 111451
Author(s):  
Muhammad Assad Munawar ◽  
Asif Hussain Khoja ◽  
Salman Raza Naqvi ◽  
Muhammad Taqi Mehran ◽  
Muhammad Hassan ◽  
...  

2021 ◽  
Vol 11 ◽  
pp. 866-874 ◽  
Author(s):  
Milan Vukšić ◽  
Irena Žmak ◽  
Lidija Ćurković ◽  
Danko Ćorić ◽  
Petra Jenuš ◽  
...  

2021 ◽  
Vol 121 ◽  
pp. 186-197
Author(s):  
Erwin Rehl ◽  
Kerry B. Reimer ◽  
P. Michael Rutherford

Sign in / Sign up

Export Citation Format

Share Document