Modified Sawdust in Adsorption of Heavy Metals from Textile Effluent

Textile effluent released into water bodies is prone to be toxic for aquatic flora and fauna. In the present study, the phytoremediation potential of Chara vulgaris (C. vulgaris) is investigated for treatment of textile effluent. The highly concentrated and toxic textile effluent is diluted to different concentrations 10%, 25%, 50%, and 75% to check the accessibility of macroalgae to bear pollutant load of textile effluent. The toxicity of textile effluent is analysed by determining different water quality parameters, namely, pH, TDS, BOD, COD, and EC. The maximum reductions in TDS (68%), COD (78%), BOD (82%), and EC (86%) were found in the 10% concentrated textile effluent after 120 h of treatment. The highly concentrated textile effluent showed its toxic effect on macroalgae and it was found unable to show a remarkable change in water quality parameters of 75% and 100% textile effluent. The correlation coefficient values are determined using correlation matrix to identify the high correlation between different water quality parameters. The removal of toxic organic pollutants by C. vulgaris was confirmed by using UV-visible absorption spectra. Typical X-ray spectra recorded using EDXRF technique indicated the presence of heavy metals Cd in the dried sample of macroalgae after treatment which show its capability to remove toxic heavy metals from textile effluent. The reliability model has been proposed for treated textile effluents to identify percentage level of toxicity tolerance of waste water by macroalgae.

Download Full-text

Textile Effluent Treatment Using Marine Cyanobacterium (Oscillatoria Subuliformis) with Coir Pith and Removal of Heavy Metals

International Journal of Scientific Research ◽

10.15373/22778179/dec2013/152 ◽

2012 ◽

Vol 2 (12) ◽

pp. 484-486

Author(s):

N. Shanmugapriya N. Shanmugapriya ◽

◽

P. Malliga P. Malliga

Keyword(s):

Heavy Metals ◽

Effluent Treatment ◽

Textile Effluent ◽

Marine Cyanobacterium ◽

Coir Pith ◽

Removal Of Heavy Metals

Download Full-text

Implementation of Floating Treatment Wetlands for Textile Wastewater Management: A Review

Sustainability ◽

10.3390/su12145801 ◽

2020 ◽

Vol 12 (14) ◽

pp. 5801

Author(s):

Fan Wei ◽

Munazzam Jawad Shahid ◽

Ghalia S. H. Alnusairi ◽

Muhammad Afzal ◽

Aziz Khan ◽

...

Keyword(s):

Heavy Metals ◽

Textile Wastewater ◽

Pollutant Removal ◽

Treatment Wetlands ◽

Textile Effluent ◽

Bacterial Strains ◽

Incomplete Removal ◽

Essential Components ◽

Floating Treatment Wetlands ◽

Selection Of

The textile industry is one of the most chemically intensive industries, and its wastewater is comprised of harmful dyes, pigments, dissolved/suspended solids, and heavy metals. The treatment of textile wastewater has become a necessary task before discharge into the environment. The textile effluent can be treated by conventional methods, however, the limitations of these techniques are high cost, incomplete removal, and production of concentrated sludge. This review illustrates recent knowledge about the application of floating treatment wetlands (FTWs) for remediation of textile wastewater. The FTWs system is a potential alternative technology for textile wastewater treatment. FTWs efficiently removed the dyes, pigments, organic matter, nutrients, heavy metals, and other pollutants from the textile effluent. Plants and bacteria are essential components of FTWs, which contribute to the pollutant removal process through their physical effects and metabolic process. Plants species with extensive roots structure and large biomass are recommended for vegetation on floating mats. The pollutant removal efficiency can be enhanced by the right selection of plants, managing plant coverage, improving aeration, and inoculation by specific bacterial strains. The proper installation and maintenance practices can further enhance the efficiency, sustainability, and aesthetic value of the FTWs. Further research is suggested to develop guidelines for the selection of right plants and bacterial strains for the efficient remediation of textile effluent by FTWs at large scales.

Download Full-text

Sampling and analysis of the air-water interface with SEM and EDS of microlayers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100157000 ◽

1989 ◽

Vol 47 ◽

pp. 1004-1005

Author(s):

Randall W. Smith ◽

John Dash

Keyword(s):

Heavy Metals ◽

Surface Microlayer ◽

Surface Films ◽

Water Interface ◽

Physical Processes ◽

Infrared Spectroscopic Analysis ◽

Eds Analysis ◽

Air Water Interface ◽

Significant Area ◽

Bulk Chemical

The structure of the air-water interface forms a boundary layer that involves biological ,chemical geological and physical processes in its formation. Freshwater and sea surface microlayers form at the air-water interface and include a diverse assemblage of organic matter, detritus, microorganisms, plankton and heavy metals. The sampling of microlayers and the examination of components is presently a significant area of study because of the input of anthropogenic materials and their accumulation at the air-water interface. The neustonic organisms present in this environment may be sensitive to the toxic components of these inputs. Hardy reports that over 20 different methods have been developed for sampling of microlayers, primarily for bulk chemical analysis. We report here the examination of microlayer films for the documentation of structure and composition.Baier and Gucinski reported the use of Langmuir-Blogett films obtained on germanium prisms for infrared spectroscopic analysis (IR-ATR) of components. The sampling of microlayers has been done by collecting fi1ms on glass plates and teflon drums, We found that microlayers could be collected on 11 mm glass cover slips by pulling a Langmuir-Blogett film from a surface microlayer. Comparative collections were made on methylcel1ulose filter pads. The films could be air-dried or preserved in Lugol's Iodine Several slicks or surface films were sampled in September, 1987 in Chesapeake Bay, Maryland and in August, 1988 in Sequim Bay, Washington, For glass coverslips the films were air-dried, mounted on SEM pegs, ringed with colloidal silver, and sputter coated with Au-Pd, The Langmuir-Blogett film technique maintained the structure of the microlayer intact for examination, SEM observation and EDS analysis were then used to determine organisms and relative concentrations of heavy metals, using a Link AN 10000 EDS system with an ISI SS40 SEM unit. Typical heavy microlayer films are shown in Figure 3.

Download Full-text