Harmful Impacts of Heavy Metals and Utility of Biosorption Technique for Their Removal from Wastewater: A Review

The increasing number of efluents discharged from the source of water (urban, industrial, agricultural etc.), is resulting in a higher concentration of heavy metals in the source. Heavy metals have a density of over 5g/cm3 to the metals. These are toxic, mutagenic, carcinogenic and resistant in watery and non-aquatic environments and impact water and non-water bodies seriously by substituting the basic metals of the same function. The extraction from the wastewater can be done in numerous techniques for example using an ion replacement, membrane filtration, osmosis, etc. This study discusses the adverse effects of heavy metals on the human body, the benefits of biosorption over traditional approaches for removal of heavy metals, the different biosorbents used to extract heavy metals and concerning issues regarding its commercial use, offering a wider viewpoint for the diversity of biosorbents and utilization of biosorption technique. It is evident from the profound literature survey that pH, biosorbent particle size, contact time, initial metal ion concentration, presence of chelating ligands etc. are some factors that affect the rate and extent of biosorption.

Fabrication and Evaluation of Bimetallic Materials for Removal of Cr6+

Adsorption technology is an effective way for removal of heavy metals ions and other organic pollutants in water treatment. In recent years, bimetallic adsorbents with high performance and low cost have attracted more and more attention. In this study, nano zero valent iron was prepared. On this basis, Fe/Cu Bimetallic materials were prepared. The effects of Cu conversion, initial concentration, time, and pH value on Cr6+ removal rate and amount were systematically tested. The results show that under the conditions of initial concentration (50mg/L), time (60min) and pH (3), the Fe/Cu material with copper conversion of 3% has the best effect on the removal of Cr6+ in wastewater. Thus, this study is expected to provide important reference data for the effective removal of Cr6+ in water.

Kinetics, thermodynamics, equilibrium, surface modelling, and atomic absorption analysis of selective Cu(ii) removal from aqueous solutions and rivers water using silica-2-(pyridin-2-ylmethoxy)ethan-1-ol hybrid material

The removal of heavy metals is attracting considerable attention due to their undesirable effects on the environment.

Development of Cerium Oxide/Corncob Nanocomposite: A Cost-Effective and Eco-Friendly Adsorbent for the Removal of Heavy Metals

This research aims to assess the efficiency of the synthesized corncob as a cost-effective and eco-friendly adsorbent for the removal of heavy metals. Therefore, to carry out the intended research project, initially, the corncob was doped with nanoparticles to increase its efficiency or adsorption capacity. The prepared adsorbent was evaluated for the adsorption of cadmium (Cd) and chromium (Cr) from aqueous media with the batch experiment method. Factors that affect the adsorption process are pH, initial concentration, contact time and adsorbent dose. The analysis of Cd and Cr was performed by using atomic absorption spectrometry (AAS), while the characterization of the adsorbent was performed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that there is a significant difference before and after corncob activation and doping with CeO2 nanoparticles. The maximum removal for both Cd and Cr was at a basic pH with a contact time of 60 min at 120 rpm, which is 95% for Cd and 88% for Cr, respectively. To analyze the experimental data, a pseudo-first-order kinetic model, pseudo-second-order kinetic model, and intra-particle diffusion model were used. The kinetic adsorption studies confirmed that the experimental data were best fitted with the pseudo-second-order kinetic model (R2 = 0.989) and intra-particle diffusion model (R2 = 0.979). This work demonstrates that the cerium oxide/corncob nanocomposite is an inexpensive and environmentally friendly adsorbent for the removal of Cd and Cr from wastewater.