Low Profile Conformal Antenna Arrays on High Impedance Substrate

Author(s):  
Hema Singh ◽  
R. Chandini ◽  
Rakesh Mohan Jha
2008 ◽  
Vol 6 ◽  
pp. 39-44 ◽  
Author(s):  
S. K. Hampel ◽  
O. Schmitz ◽  
I. Rolfes

Abstract. \\label{sec:abstract} This paper deals with the influence of artificial magnetic conductors (AMC), so-called Sievenpiper High Impedance Surfaces (HIS), on the MIMO and Diversity performance of a planar linear-polarized 2×2 dipole array in the ISM-band at 2.45 GHz. The characteristic performance criteria such as envelope correlation coefficient, spectral efficiency, Mean Effective Gain (MEG) and Diversity gain of a coupled 2×2 dipole array are investigated. By means of full-wave electromagnetic analysis as well as Monte-Carlo simulations applying statistical channel models the characteristic antenna pattern just as the MIMO and Diversity analysis is performed, respectively. The obtained results show that the application of Sievenpiper High Impedance Surfaces to planar antenna arrays enables good MIMO and Diversity performance compared to ideal configurations in free-space while offering the design of low profile antennas with simultaneously enhanced characteristics.


Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3809
Author(s):  
Mohammed M. Bait-Suwailam ◽  
Isidoro I. Labiano ◽  
Akram Alomainy

In this paper, impedance matching enhancement of a grounded wearable low-profile loop antenna is investigated using a high-impedance surface (HIS) structure. The wearable loop antenna along with the HIS structure is maintained low-profile, making it a suitable candidate for healthcare applications. The paper starts with investigating, both numerically and experimentally, the effects of several textile parameters on the performance of the wearable loop antenna. The application of impedance enhancement of wearable grounded loop antenna with HIS structure is then demonstrated. Numerical full-wave simulations are presented and validated with measured results. Unlike the grounded wearable loop antenna alone with its degraded performance, the wearable loop antenna with HIS structure showed better matching performance improvement at the 2.45 GHz-band. The computed overall far-field properties of the wearable loop antenna with HIS structure shows good performance, with a maximum gain of 6.19 dBi. The effects of bending the wearable loop antenna structure with and without HIS structure as well as when in close proximity to a modeled human arm are also investigated, where good performance was achieved for the case of the wearable antenna with the HIS structure.


2002 ◽  
Vol 38 (16) ◽  
pp. 849 ◽  
Author(s):  
H. Xin ◽  
K. Matsugatani ◽  
M. Kim ◽  
J. Hacker ◽  
J.A. Higgins ◽  
...  

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nama Ajay Nagendra ◽  
Lakshman Pappula

PurposeThe issues of radiating sources in the existence of smooth convex matters by such objects are of huge significance in the modeling of antennas on structures. Conformal antenna arrays are necessary when an antenna has to match to certain platforms. A fundamental problem in the design is that the possible surfaces for a conformal antenna are infinite in number. Furthermore, if there is no symmetry, each element will see a different environment, and this complicates the mathematics. As a consequence, the element factor cannot be factored out from the array factor.Design/methodology/approachThis paper intends to enhance the design of the conformal antenna. Here, the main objective of this task is to maximize the antenna gain and directivity from the first-side lobe and other side-lobes in the two way radiation pattern. Thus the adopted model is designed as a multiobjective concern. In order to attain this multiobjective function, both the element spacing and the radius of each antenna element should be optimized based on the probability of the Crow Search Algorithm (CSA). Thus the proposed method is named Probability Improved CSA (PI-CSA). Here, the First Null Beam Width (FNBW) and Side-Lobe Level (SLL) are minimized. Moreover, the adopted scheme is compared with conventional algorithms, and the results are attained.FindingsFrom the analysis, the gain of the presented PI-CSA scheme in terms of best performance was 52.68% superior to ABC, 25.11% superior to PSO, 13.38% superior to FF and 3.21% superior to CS algorithms. Moreover, the mean performance of the adopted model was 62.94% better than ABC, 13.06% better than PSO, 24.34% better than FF and 10.05% better than CS algorithms. By maximizing the gain and directivity, FNBW and SLL were decreased. Thus, the optimal design of the conformal antenna has been attained by the proposed PI-CSA algorithm in an effective way.Originality/valueThis paper presents a technique for enhancing the design of the conformal antenna using the PI-CSA algorithm. This is the first work that utilizes PI-CSA-based optimization for improving the design of the conformal antenna.


Sign in / Sign up

Export Citation Format

Share Document