The use of ultra-sonics in cellulose production from straw, grasses and similar material

1958 ◽  
Vol 5 (1-2) ◽  
pp. 134-144 ◽  
Author(s):  
G. Obolensky
2016 ◽  
Vol 53 (10) ◽  
pp. 624-633
Author(s):  
R. Blank ◽  
I. Reinkensmeier ◽  
A. Neidel ◽  
L. Farahbod
Keyword(s):  

2019 ◽  
pp. 1-3
Author(s):  
Madhuri B ◽  
Narasimha G ◽  
Balaji M*

Areca palm (ChrysalidoCarpus lutescenes) a widely used plant having feathery arching brands with 100 leaflets. All these plants produce much of waste in additions to greeny and nuts. This waste of spade is used for the production of various molecules that are used in industry and pharma sector. Fermentation techniques are used to generate economically important enzymes for industrial and pharmaceutical purposes. Cellulase enzyme degrades the cellulose in between β-1, 4 glucosidic link found in lignocellulosic complex which under physical treatment is slower to degrade. The present study of Aspergillus niger for cellulose production was carried in solid state (SS) and submerged (SM) fermentations for production of cellulase enzyme. Cellulase production in SSF after 72 h of fermentation was 8.02 and in SMF activity was 2.98 per ml of cultured broth at H 6 and temperature at 30°C. Both SMF and SSF were supplemented with lactose and lactobionic acid, which acted as cellulase P production inducers. The aim of the present work was to study the effect of Areca palm spade as substrate for Aspergillus niger and its cellulase production under SMF and SSF.


2021 ◽  
Vol 162 ◽  
pp. 113256
Author(s):  
Qing Wang ◽  
Pleasure Chisom Nnanna ◽  
Fei Shen ◽  
Mei Huang ◽  
Dong Tian ◽  
...  

Author(s):  
Ana Forte ◽  
Fernando Dourado ◽  
André Mota ◽  
Belmira Neto ◽  
Miguel Gama ◽  
...  

2007 ◽  
Vol 280-283 ◽  
pp. 389-392
Author(s):  
J.L. Cui

Ternary compounds (PbTe)1-x(SnTe)x with nanocrystallines were synthesized at a temperature of 180oC by conventional solvothermal method. XRD analyses revealed that relatively pure compounds can be synthesized using ethylenediamine as a solvent only when a reaction time of at least 24h is applied. The XRD results are in agreement well with those from EMPA analysis. The grain sizes of the materials, ranging from 50~70nm, are slowly increased with reaction time. Measurements showed that the maximum power factor of about 6.0×10-4 W.m.K-2 for the synthesized materials are higher than that of similar material prepared by vacuum melting.


1980 ◽  
Vol 14 (1) ◽  
pp. 159-162
Author(s):  
Michael Loewe

Until the evolution of paper, which is dated traditionally in A.D. 105, the majority of Chinese documents were probably written on boards or narrow strips of wood or bamboo; the use of silk was reserved for the preparation of de luxe copies of certain works, either for sacred or for profane purposes. However, it was only quite recently that actual examples of wooden documents from China were first brought to the attention of the scholastic world, as a result of two series of expedit ions to central Asia and northwestern China. First, Sir Aurel Stein's expeditions, at the be ginning of the century, brought back fragments of inscribed wood from the sites of Tun-huang; thi s was subsequently examined and the results published, by Chinese scholars such as Wang Kuo-wei, an European scholars such as Chavannes and Maspero. Secondly, the expeditions led by Sven Hedin s ome thirty years later found similar material in larger quantities, from the more easterly sites of Chü-yen (Edsen-gol). These texts were published by a number of scholars, beginning with L ao Kan,who was working in China in the extremely difficult conditions of the 1940s.1940s.Shortly afterwards, Japanese scholars were able to turn their attention to this material whose content, l ike thatof the strips from Tun-huang, was almost exclusively concerned with the civil and militar y administration of Han imperial officials, between about 100 B.C.and A.D. 100. In the early 1960 s Professor Mori Shikazo led a series of seminar meetings to study the material from Chii-yen, wh ich the present writer was fortunate and privileged to attend. The results of such meetings were published atthe time in a number of Japanese periodicals, and constituted a valuable contribution to the studyof the wooden material from China known to exist at that time.


1963 ◽  
Vol 41 (1) ◽  
pp. 1691-1702 ◽  
Author(s):  
T. E. Webb ◽  
J. Ross Colvin

The production of cellulose by lysozyme lysates of Acetobacter xylinum is similar to that of a suspension of whole cells, in contrast to the negative results obtained with previous "cell-free" preparations. The results of differential centrifugation of these lysates suggests that most of the enzymes required for cellulose synthesis from glucose normally are held by the cell envelope and are not located in the cytoplasm. However, a heat-stable cofactor(s) is present in the supernatant derived from the cell contents which may stimulate cellulose synthesis by the cell envelopes.The addition of extracts from a number of plant sources increased cellulose synthesis by whole cells of A. xylinum. In particular, the supernatant prepared by centrifugation of an homogenate of tomatoes increased bacterial cellulose production at pH 6 by a factor of 3. Both dialyzable and non-dialyzable substances in the extract are responsible. Fractionation of the non-dialyzable portion of the extract by column chromatography suggests that the overall increase is due to additive effects of several compounds. Here also the compounds appear to act upon the bacterial cell envelope.


2011 ◽  
Vol 261-263 ◽  
pp. 1679-1684
Author(s):  
Xiao Ling Liu ◽  
Shi Mei Wang ◽  
Yun Zhi Tan ◽  
Xin Jiang Hu ◽  
Dai Peng Zhao

The choice of similar materials and the design of mix proportions is a key step in landslide model test. On the basis of experiment, we conduct a research for the similar materials which may sufficing volume weight, cohesive force, angle of internal friction, deformation modulus, and the infiltration coefficient on the same time. Then we put forward two kinds of schemes: one is the mixed material of high-strength glass micro beads and talcum powder; the other is the mixed material of lead beads, river sands, rubber powder and talcum powder. By analyzing the result of mix proportions test, We concluded the regularity that similar index varies along with different content of the similar material ingredients and found the notable influence factors , which provides important reference for the components of similar materials in the landslide model test.


1966 ◽  
Vol 21 (3) ◽  
pp. 226-231 ◽  
Author(s):  
Hans J. Lippolt ◽  
Gerald J. Wasserburg

A Rb-Sr isotopic study of 5 glasses from the Bosumtwi crater in Ghana and of three Ivory Coast tektites was made. The Sr87/Sr86 ratios for the glasses lie between 0.716 and 0.734 and those for the tektites between 0.721 and 0.726. The ratios of Rb/Sr are between 0.196 and 0.328 for the crater glasses and between 0.197 and 0.287 for the tektites. The Ivory Coast tektites lie in a region of the Sr evolution diagram which is distinctly lower than for the other tektite groups 1. The Bosumtwi glasses define an approximately linear array on the Sr evolution diagram which contains the Ivory Coast tektite points. These results show that the IC tektites are distinctive from other tektite occurences and suggest that the glasses and the tektites may represent fusion products of similar material.


Sign in / Sign up

Export Citation Format

Share Document