Analysis of longitudinal leaky surface acoustic waves on quartz thin plate bonded to similar-material substrate

The propagation and resonance properties of longitudinal leaky surface acoustic waves (LLSAWs) on bonded structures consisting of a quartz (Qz) thin plate and a Qz support substrate with different Euler angles were investigated theoretically. By using both an X-cut Qz thin plate and a Qz support substrate with optimal Euler angles, we obtained LLSAWs with a larger coupling factor, a smaller attenuation, and a lower temperature coefficient of frequency than those on a single Qz substrate. Furthermore, from the resonance properties simulated by the finite element method, the bonded structures were found to exhibit a large admittance ratio and a high quality factor, which could not be obtained when using a single Qz substrate; the bandwidth however was as small as 0.016-0.086%.

Measurement of clustering effectiveness for document collections

Clustering of the contents of a document corpus is used to create sub-corpora with the intention that they are expected to consist of documents that are related to each other. However, while clustering is used in a variety of ways in document applications such as information retrieval, and a range of methods have been applied to the task, there has been relatively little exploration of how well it works in practice. Indeed, given the high dimensionality of the data it is possible that clustering may not always produce meaningful outcomes. In this paper we use a well-known clustering method to explore a variety of techniques, existing and novel, to measure clustering effectiveness. Results with our new, extrinsic techniques based on relevance judgements or retrieved documents demonstrate that retrieval-based information can be used to assess the quality of clustering, and also show that clustering can succeed to some extent at gathering together similar material. Further, they show that intrinsic clustering techniques that have been shown to be informative in other domains do not work for information retrieval. Whether clustering is sufficiently effective to have a significant impact on practical retrieval is unclear, but as the results show our measurement techniques can effectively distinguish between clustering methods.

Optimal Proportion of Similar Materials and Rockburst Tendency of White Sandstone

To explore the tendency of rockburst, a similar material ratio was optimised based on white sandstone. Quartz sand, iron powder, gypsum, cement, retarder, and a water-reducing agent were used as the main materials. The orthogonal test design principle was used to determine the four-factor and four-level orthogonal test design with the quartz sand content, iron powder content, gypsum-cement ratio, and sand particle size as the influencing factors. Uniaxial compression tests and tensile tests were conducted on similar material models. The tensile strength and elastic modulus were analysed, the significance of each influencing factor was investigated, and the test results of the similar materials were fitted. The optimal ratios of the similar materials of white sandstone were found to be quartz sand content of 36%, iron powder content of 1.9%, gypsum-cement ratio of 1.8 : 1, and sand particle size of 2–4 mm. The physical and mechanical properties of the similar materials were consistent with those of white sandstone. The mechanical properties of the similar materials were compared with those of the original rock. By judging the rockburst propensity and verifying the index, it is concluded that the similar materials can effectively simulate the characteristics of white sandstone, which is an ideal similar material of rockburst, and they all show strong rockburst propensity. The rock specimens with optimal proportions were produced, and the internal energy changes and rockburst mechanisms of the model at different temperatures were discussed. The results show that the rockburst process is closely related to energy, such as thermal energy and elastic strain energy, and the rock failure process can be divided into three main stages: energy accumulation, microcrack formation and propagation, and crack penetration and bursting. It provides an experimental basis for the preparation of rockburst similar materials that are more in line with the actual situation of the project and provides a basis for discussing the energy criterion of rockburst.

Study and Application of Similar Material Ratio in Collapsible Loess

The similar material of collapsible loess is the basis and premise of the experimental study on the surface movement and deformation law of coal seam mining in collapsible loess-covered areas. The orthogonal experiment is used to make up similar material with different proportions using river sand and barite powder as aggregate, clay and gypsum as cementing material, and diatomite as adjusting material. The reasonable proportion of similar material in collapsible loess is studied by using range analysis, similar simulation, and field measurement. The results show that the content of diatomite plays a leading role in the collapsibility coefficient of similar material, and the collapsibility coefficient is positively correlated with the content of diatomite; moisture content is the main control of the cohesion of the material, and cohesion is negatively correlated with the moisture content; the ratio of bone-to-glue has the most significant effect on the internal friction angle, and the internal friction angle is positively correlated with the ratio of bone-to-glue. The reasonable ratio of the similar material in collapsible loess is 8 : 2 of the ratio of bone-to-glue, the ratio of clay-to-gypsum is 9 : 1, the barite powder content is 6%, the diatomite content is 23%, and the moisture content is 13%, and the mechanical parameters of the collapsible loess are 5.3%–6.3% different from the target value of similar material through laboratory tests, which can meet the experimental requirements. It is verified by a similar simulation experiment that the maximum surface subsidence value and the surface fracture width in the simulation results are 6.9% and 7.8% different from the field measured results, indicating a high degree of agreement. The results of the study have important references and guiding significance for the preparation of similar material with similar models.

The Student in the Classroom and Beyond

This chapter provides an exposition of former students’ memories of secondary schooling in Ireland for the period 1922–1967, supplemented by similar material uncovered in the historical record. No claim is made that it portrays what were the common experiences of all. Rather, it is the product of a desire to cast the net as widely as possible, in order to canvass a maximum variety of perspectives. Further, most although not all of the testimony upon which we have based it is mainly of the ‘topical life story’ type. In other words, it is testimony based on memory. At the same time, we are not denying the possibility that it has the potential to provide understandings to add to the corpus of historical work already undertaken on the history of Irish secondary school education presented in previous chapters.

STUDY OF THERMOMECHANICAL PROPERTIES OF UHMWPE

The paper presents comparative studies of the thermomechanical properties of ultra-high molecular weight polyethylene (UHMWPE) and its composite containing 0.5% coke-graphite powder (CGP). It was found that explosive pressing with a pressure of 0.25-0.6 GPa provides high heat resistance of UHMWPE and the investigated composite (154-156 ° C). The heat resistance of the composite decreases to 143-145 ° C, but it is higher than that of a similar material after static pressing (128 ° C).

Magazines for Women

Women’s magazines had a dual aim in the period, providing fiction and other forms of entertainment reading and offering practical advice about childcare, cookery and household management. They also nurtured skills including knitting and dressmaking, offering designs for clothes for children and themselves. Pictorial covers presented both the twin aims, through precise wording of contents matched by images offering more attractive ways of living. Fiction combined image and text in advancing or delaying events, and often making moral points. Woman’s Life in the 1920s matched these aims with illustrated fiction mingling escape and guidance: it also included occasional comic strips for young children. The more expensive Woman and Home attracted readers from a slightly higher income bracket but covered similar material. Launched in 1932, Woman’s Own used the newer forms of printing and design, reflecting greater confidence of its readers and newer material including film reviews.