X-ray diffraction study of the distribution of texture over the cross section of uranium bars worked in the ?- and ?-phases and subjected to quenching

1966 ◽  
Vol 21 (3) ◽  
pp. 841-845
Author(s):  
V. F. Zelenskii ◽  
V. V. Kunchenko ◽  
N. M. Roenko ◽  
L. D. Kolomiets ◽  
A. I. Stukalov
1977 ◽  
Vol 270 (2) ◽  
pp. 311-320 ◽  
Author(s):  
I Matsubara ◽  
H Suga ◽  
N Yagi

1976 ◽  
Vol 31 (9-10) ◽  
pp. 612-621 ◽  
Author(s):  
W Müller-Klieser ◽  
W Kreutz

Abstract Mitochondria were isolated using sorbitol and high buffer concentration in the medium. X-ray diffraction patterns arising from the mitochondrial cristae-membrane were recorded in the fully dried state and in two different states in humidity. The Q-function evaluation of these X-ray dif­fraction diagrams resulted in electron density cross-section profiles, which consist of two main peaks of opposite sign and one, respectively two, smaller peaks. The total thickness of the membrane amounts to 120 Å in the dry and 140 Å to 160 Å in the wet state.An interpretation of the cross-section profile is tentatively proposed.


1991 ◽  
Vol 77 (11) ◽  
pp. 2052-2059 ◽  
Author(s):  
Tizuko MAEDA ◽  
Keiichi MARUTA ◽  
Osamu FURUKIMI ◽  
Nobuyuki MORITO

2018 ◽  
Vol 51 (6) ◽  
pp. 1586-1596
Author(s):  
Marc Gailhanou ◽  
Jean-Marc Roussel

The helical nature of twisted nanowires is studied by simulated X-ray diffraction. It is shown that this helicity is revealed by the anisotropy, which can be both an elastic anisotropy, through the warping displacement generated by torsion, or a shape anisotropy of the cross section. To support the analytical calculations, based on the kinematic theory of diffraction by helices, atomistic simulations of copper nanowires are performed.


1998 ◽  
Vol 542 ◽  
Author(s):  
Lianchao Sun ◽  
James E. Crocker ◽  
Leon L. Shaw ◽  
Harris L. Marcus

AbstractIn this work, the deposition of silicon carbide lines using a tetramethylsilane (TMS) precursor was investigated. Effects of target temperatures on the morphology and crystal structure of the deposits were examined. It was found that the morphology of the SALD SiC depends strongly on the target temperature. The contour of the cross section of the SiC deposits changes from a triangle to trapezoid to volcano shape and the surface morphology of the deposited lines changes from smooth to rough to porous as the target temperature increases. A critical target temperature was found to be about 700°C to initiate deposition of SiC under the current experimental configurations. X-ray diffraction analyses show that the SALD SiC formed at 1000°C contains both crystalline and amorphous phases. The results are briefly discussed.


2011 ◽  
Vol 704-705 ◽  
pp. 685-689 ◽  
Author(s):  
Yao Li Wang ◽  
Ke Ke Zhang ◽  
Chen Yang Li ◽  
Li Juan Han

The morphology and growing behavior of Cu6Sn5intermetallic compound (IMC) of low Ag content Sn-2.5Ag-0.7Cu-0.1RE/Cu solder joint interface are investigated by adopting the X-ray diffraction, JSM-5610LV scanning electronic microscope and energy spectrum analysis. The results show that the cross-section morphology Cu6Sn5of the solder joint interface is scallop-like and its section morphology is circle-like grain. With the aging time increasing, the cross-section Cu6Sn5morphology of the solder joint interface can be changed from the scallop-like to the shape-layer, and the growing kinetics is coincidence with the law of parabola and its growing behavior is controlled by diffusion. With adding a small amount of rare earth elements in the Sn-2.5Ag-0.7Cu solder alloy, the growing rate of the Cu6Sn5can be reduced.


Author(s):  
Thomas S. Leeson ◽  
C. Roland Leeson

Numerous previous studies of outer segments of retinal receptors have demonstrated a complex internal structure of a series of transversely orientated membranous lamellae, discs, or saccules. In cones, these lamellae probably are invaginations of the covering plasma membrane. In rods, however, they appear to be isolated and separate discs although some authors report interconnections and some continuities with the surface near the base of the outer segment, i.e. toward the inner segment. In some species, variations have been reported, such as longitudinally orientated lamellae and lamellar whorls. In cross section, the discs or saccules show one or more incisures. The saccules probably contain photolabile pigment, with resulting potentials after dipole formation during bleaching of pigment. Continuity between the lamina of rod saccules and extracellular space may be necessary for the detection of dipoles, although such continuity usually is not found by electron microscopy. Particles on the membranes have been found by low angle X-ray diffraction, by low temperature electron microscopy and by freeze-etching techniques.


Author(s):  
Douglas L. Dorset

A variety of linear chain materials exist as polydisperse systems which are difficultly purified. The stability of continuous binary solid solutions assume that the Gibbs free energy of the solution is lower than that of either crystal component, a condition which includes such factors as relative molecular sizes and shapes and perhaps the symmetry of the pure component crystal structures.Although extensive studies of n-alkane miscibility have been carried out via powder X-ray diffraction of bulk samples we have begun to examine binary systems as single crystals, taking advantage of the well-known enhanced scattering cross section of matter for electrons and also the favorable projection of a paraffin crystal structure posited by epitaxial crystallization of such samples on organic substrates such as benzoic acid.


1986 ◽  
Vol 47 (1) ◽  
pp. 133-138 ◽  
Author(s):  
D. Guillon ◽  
A. Skoulios ◽  
J.J. Benattar

Sign in / Sign up

Export Citation Format

Share Document