Thermal condition of the lining of channel induction furnaces by the method of electrical simulation

Refractories ◽  
1983 ◽  
Vol 24 (11-12) ◽  
pp. 643-648
Author(s):  
A. F. Kolesnichenko ◽  
O. N. Lun'kova ◽  
B. A. Fochenkov
Keyword(s):  
Thermal Condition ◽  
Electrical Simulation

HISTOLOGICAL AND MOLECULAR STUDY OF SPLEEN IN Japanese Quail UNDER THERMAL CONDITION

2017 ◽  
Vol 16 (1) ◽  
pp. 1-10
Author(s):  
Zainab A. Al-Ali Majdy Faisal Jalal yaseen
Keyword(s):  
Japanese Quail ◽  
Thermal Condition ◽  
Molecular Study

A Modular Race Tire Model Concerning Thermal and Transient Behavior using a Simple Contact Patch Description

2013 ◽  
Vol 41 (4) ◽  
pp. 232-246
Author(s):  
Timo Völkl ◽  
Robert Lukesch ◽  
Martin Mühlmeier ◽  
Michael Graf ◽  
Hermann Winner
Keyword(s):  
Load Distribution ◽  
Thermal Condition ◽  
Transient Behavior ◽  
Wheel Load ◽  
Contact Patch ◽  
Fundamental Parameters ◽  
Dry Conditions ◽  
Simple Contact ◽  
Tire Forces ◽  
Descriptive Set

ABSTRACT The potential of a race tire strongly depends on its thermal condition, the load distribution in its contact patch, and the variation of wheel load. The approach described in this paper uses a modular structure consisting of elementary blocks for thermodynamics, transient excitation, and load distribution in the contact patch. The model provides conclusive tire characteristics by adopting the fundamental parameters of a simple mathematical force description. This then allows an isolated parameterization and examination of each block in order to subsequently analyze particular influences on the full model. For the characterization of the load distribution in the contact patch depending on inflation pressure, camber, and the present force state, a mathematical description of measured pressure distribution is used. This affects the tire's grip as well as the heat input to its surface and its casing. In order to determine the thermal condition, one-dimensional partial differential equations at discrete rings over the tire width solve the balance of energy. The resulting surface and rubber temperatures are used to determine the friction coefficient and stiffness of the rubber. The tire's transient behavior is modeled by a state selective filtering, which distinguishes between the dynamics of wheel load and slip. Simulation results for the range of occurring states at dry conditions show a sufficient correlation between the tire model's output and measured tire forces while requiring only a simplified and descriptive set of parameters.

General Compiled Electrical Simulation

1987 ◽  
Author(s):  
Daniel Weise ◽  
Scott Seligman
Keyword(s):  
Electrical Simulation

Electrical Simulation of Human Cardio-Vascular System and Real-Time Tele-Monitoring of Cardiac Status of the Patients

2013 ◽  
Vol 83 (2) ◽  
pp. 55
Author(s):  
Rudra Vaswata Roy Choudhury ◽  
Ayan Debnath ◽  
Surajit Bagchi
Keyword(s):  
Real Time ◽  
Vascular System ◽  
Electrical Simulation ◽  
Cardio Vascular ◽  
Cardiac Status ◽  
Tele Monitoring

scholarly journals The Effect Of Outside Corridor’s Orientation to Interior Thermal Condition at Lawang Sewu Semarang.

2018 ◽  
Vol 73 ◽  
pp. 01011
Author(s):  
Benediktus Yosef Arya Wastunimpuna ◽  
Wahyu Setia Budi ◽  
Erni Setyowati
Keyword(s):  
Heat Stress ◽  
Relative Humidity ◽  
Thermal Condition ◽  
Natural Ventilation ◽  
Thermal Conditions ◽  
Standard Theory ◽  
Hot Wire ◽  
Air Movement ◽  
Dutch Colonial

The outside corridor of Dutch Colonial Building in Indonesia was made to make the temperature of the room more comfortable. Lawang Sewu Building in Semarang is one example of a building that has an outside corridor along the building and until now still use natural ventilation. This study focuses on finding out whether there is a difference on the thermal conditions of each room’s orientation, so after that we know the effect of orientation of the outdoor corridor to the temperature of the interior. In this study the experiment based on measurement using Heat Stress WBGT Meter for Wet Bulb Temperature, Dry Bulb Temperature, Relative Humidity, and KW0600653 Hot Wire Anemometer for the air movement. The data will be analysed using thermal standard theory to find out which point has the most comfortable thermal conditions.. At the end of this study will be found the effect of corridor’s orientation to thermal condition of the interior in Lawang Sewu Semarang.

scholarly journals Thermal condition in Semarang Cathedral’s passive cooling system

2018 ◽  
Author(s):  
Augi Sekatia ◽  
Bangun I. R. Harsritanto ◽  
Erni Setyowati ◽  
Gagoek Hardiman
Keyword(s):  
Thermal Condition ◽  
Cooling System ◽  
Passive Cooling ◽  
Passive Cooling System

Thermal condition of high-power laser diodes

2015 ◽  
Vol 42 (3) ◽  
pp. 88-92 ◽  
Author(s):  
V. V. Bezotosnyi ◽  
O. N. Krokhin ◽  
V. A. Oleshchenko ◽  
V. F. Pevtsov ◽  
Yu. M. Popov ◽  
...  
Keyword(s):  
High Power ◽  
Thermal Condition ◽  
Laser Diodes ◽  
High Power Laser ◽  
Power Laser
Sign in / Sign up

Export Citation Format

Share Document