Long-term performance in vitro and in vivo of dual-energy X-ray absorptiometry

1995 ◽  
Vol 14 (2) ◽  
pp. 180-186 ◽  
Author(s):  
J. Y. Reginster ◽  
R. Deroisy ◽  
B. Zegels ◽  
I. Jupsin ◽  
A. Albert ◽  
...  
2020 ◽  
Vol 574 ◽  
pp. 118870 ◽  
Author(s):  
Moran Haim Zada ◽  
Awanish Kumar ◽  
Omar Elmalak ◽  
Elana Markovitz ◽  
Ruthy Icekson ◽  
...  

2018 ◽  
Author(s):  
Dayo O. Adewole ◽  
Laura A. Struzyna ◽  
James P. Harris ◽  
Ashley D. Nemes ◽  
Justin C. Burrell ◽  
...  

AbstractAchievements in intracortical neural interfaces are compromised by limitations in specificity and long-term performance. A biological intermediary between devices and the brain may offer improved specificity and longevity through natural synaptic integration with deep neural circuitry, while being accessible on the brain surface for optical read-out/control. Accordingly, we have developed the first “living electrodes” comprised of implantable axonal tracts protected within soft hydrogel cylinders for the biologically-mediated monitoring/modulation of brain activity. Here we demonstrate the controlled fabrication, rapid axonal outgrowth, reproducible cytoarchitecture, and simultaneous optical stimulation and recording of neuronal activity within these engineered constructs in vitro. We also present their transplantation, survival, integration, and optical recording in rat cortex in vivo as a proof-of-concept for this neural interface paradigm. The creation and functional validation of these preformed, axon-based “living electrodes” is a critical step towards developing a new class of biohybrid neural interfaces to probe and modulate native circuitry.


1997 ◽  
Vol 51 (5) ◽  
pp. 312-317 ◽  
Author(s):  
CD Economos ◽  
ME Nelson ◽  
MA Fiatarone ◽  
GE Dallal ◽  
SB Heymsfield ◽  
...  
Keyword(s):  

1986 ◽  
Vol 15 (1) ◽  
pp. 19-22 ◽  
Author(s):  
G H Isaac ◽  
J R Atkinson ◽  
D Dowson ◽  
B M Wroblewski

A number of polyethylene acetabular cups (59) and femoral stems (38) of Charnley hip prostheses were obtained following revision surgery and examined by scanning electron microscopy. In many cases, acrylic cement particles were embedded in the articulating surface of the cups. These particles caused surface pitting. The appearance of the articulating surfaces suggested that some cement had been present from the time of arthroplasty. In other cups there was evidence of cement ingress during the service life. Failure to use sufficient cement at arthroplasty resulted in cavities on the backs of the cups. Many femoral heads had become scratched in vivo, the surface roughness increasing from an initial value less than 0.02 μm Ra to a value on removal of 0.07 μm Ra. The increased roughness increases the amount of wear in the polyethylene sockets. Laboratory tests show that retrieved acrylic cement particles will scratch stainless steel, and it is our conclusion that entrapped cement will damage both components of the prosthesis and may cause premature failure.


2009 ◽  
Vol 11 (2) ◽  
pp. 275-285 ◽  
Author(s):  
Christina D. Economos ◽  
Miriam E. Nelson ◽  
Maria A. Fiatarone ◽  
Gerard E. Dallal ◽  
Steven B. Heymsfield ◽  
...  

2016 ◽  
Vol 33 (4) ◽  
pp. 37-48 ◽  
Author(s):  
Takashi Tokuda ◽  
Toshikazu Kawamura ◽  
Keita Masuda ◽  
Tomohiro Hirai ◽  
Hironari Takehara ◽  
...  

1988 ◽  
Vol 127 ◽  
Author(s):  
G. R. Lumpkin ◽  
R. C. Ewing

ABSTRACTCubic pyrochlore structure types, A2-mB2O6(O, OH, F) i-n*pH2O, and their derivatives (e.g., monoclinic zirconolite) are important actinide-bearing phases in polyphase, ceramic waste forms (e.g., SYNROC). These waste form phases may typically accumulate alpha-decay doses of 1025 alpha-events/m3 in 1, 000 years or 1026alpha-events/m3 in one million years (i.e., for SYNROC with 20 wt. % HLW). Natural pyrochlores have calculated doses ranging from 1024 to 1027 alpha-events/m3 (= 0.02 to 50 dpa) which have accumulated over ten to a thousand million years. Actinide doping experiments typically reach doses of 1025 alpha-events/m3over periods of several years. Detailed x-ray diffraction analysis of natural samples reveals that the alpha-decay dose at which there is an initial loss of crystallinity (i.e., transition from crystalline to the aperiodic, metamict state as a result of alpha-decay damage) increases as a function of the geologic age of the sample. The increase in the calculated alpha-decay dose which is associated with a specific degree of damage (e.g., loss of x-ray diffraction intensity) is attributed to annealing of isolated alpha-recoil tracks back to the original, crystalline structure. Based on a model of gradual track fading, the alpha-recoil tracks in natural pyrochlores have mean lives on the order of 108 years. In contrast, minerals which remain crystalline (e.g., uraninite, UO2) despite doses of over 1027 alpha-events/m3 have mean alpha-recoil track lives of approximately 104 years. This demonstrates that the microstructure of alpha-decay damaged materials depends not only on the total alpha-event dose, but also on the annealing kinetics of alpha-recoil track fading. Therefore, the prediction of the long-term performance and final state of crystalline phases in ceramic nuclear waste forms requires the determination of alpha-recoil damage annealing as a function of time and temperature.


Author(s):  
Atefeh Jafari ◽  
Desiree D. M. Ferreira ◽  
Shima Kadkhodazadeh ◽  
Takeshi Kasama ◽  
Sonny Massahi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document