On the extremal value of the thermoelastic energy of a material with an inclusion subject to mechanical and thermal action

1997 ◽  
Vol 84 (6) ◽  
pp. 1484-1488
Author(s):  
V. S. Kirilyuk
2018 ◽  
Vol 77 (19) ◽  
pp. 1719-1727
Author(s):  
N. G. Kokodiy ◽  
М. V. Kaydash ◽  
S. V. Pogorelov

2012 ◽  
Vol 9 (1) ◽  
pp. 91-93
Author(s):  
U.R. Ilyasov ◽  
A.V. Dolgushev

The problem of volumetric thermal action on a moist porous medium is considered. Numerical solution, the influence of fluid mobility on the dynamics of the heat and mass transfer process is analyzed. It is established that fluid mobility leads to a softer drying regime. It is shown that in low-permeability media, the fluid can be assumed to be stationary.


1992 ◽  
Vol 28 (8) ◽  
pp. 522-524
Author(s):  
N. S. Artemov ◽  
V. A. Bogush ◽  
A. G. Tkachev
Keyword(s):  

1865 ◽  
Vol 155 ◽  
pp. 71-202 ◽  

I. About the year 1780 it was distinctly proved that the same weights of different bodies require unequal quantities of heat to raise them through the same temperature, or on cooling through the same number of thermometric degrees, give out unequal quantities of heat. It was recognized that for different bodies the unequal quantities of heat, by which the same weights of different bodies are heated through the same range, must be determined as special constants, and considered as characteristic of the individual bodies. This newly discovered property of bodies Wilke designated as their specific heat , while Crawford described it as the comparative heat, or as the capacity of bodies for heat . I will not enter upon the earliest investigations of Black, Irvine, Crawford, and Wilke, with reference to which it may merely be mentioned that they depend essentially on the thermal action produced when bodies of different temperatures are mixed, and that Irvine appears to have been the first to state definitely and correctly in what manner this thermal action (that is, the temperature resulting from the mixture) depends on the original temperature, the weights, and the specific heats of the bodies used for the mixture. Lavoisier and Laplace soon introduced the use of the ice-calorimeter as a method for determining the specific heat of bodies; and J. T. Mayer showed subsequently that this determination can be based on the observation of the times in which different bodies placed under comparable conditions cool to the same extent by radiation. The knowledge of the specific heats of solid and liquid bodies gained during the last century, and in the first sixteen years of the present one, by these various methods, may be left unmentioned. The individual determinations then made were not so accurate that they could be compared with the present ones, nor was any general conclusion drawn in reference to the specific heats of the various bodies. 2. Dulong and Petit’s investigations, the publication of which commenced in 1818, brought into the field more accurate determinations, and a general law. The investigations of the relations between the specific heats of the elements and their atomic weights date from this time, and were afterwards followed by similar investigations into the relations of the specific heats of compound bodies to their composition. In order to give a general view of the results of these investigations, it is desirable to present, for the elements mentioned in the sequel, a synopsis of the atomic weights assumed at different times, and of certain numbers which stand in the closest connexion with these atomic weights.


2015 ◽  
Vol 729 ◽  
pp. 224-227 ◽  
Author(s):  
Tatyana Zhilina

Method of active thermal action on zone of thermo-conductive inclusions by use of direct heat flow has been discussed.


1992 ◽  
Vol 266 ◽  
Author(s):  
Mahendra R. Doshi ◽  
John H. Klungness

AbstractAdvances in printing technology have posted serious problems for the deinking industry. When ink is fused, as in laser printing and the photocopy process, when water resistant binders are included in coatings or ink formulations, and when varnishes are applied to printed papers, conventional methods fail to disperse inks and specks. The objective of this article is to review different approaches available for removing these inks and specks. Copying processes, coatings, and varnishing processes are discussed prior to discussing deinking and speck removal processes.Deinking ideally involves intense mechanical, chemical, and thermal action needed to detach non-dispersible inks from fibers. The detached ink is then removed by screens, cleaners, washing, and the flotation process. If higher brightness and cleanliness are desired, high-consistency dispersion, together with bleaching or the use of agglomerating chemicals (for photocopy-laser toners), may have to be considered. For coating specks, increasing the pH. increased pulping time, and removal by cleaners are typically used to reduce the number and size of specks. Varnish specks can be more difficult to remove than coating specks, as they are resistant to chemical treatment and are not easily removed by centrifugal cleaners. Flotation removal holds promise for removing varnish specks if particle size is controlled.


Sign in / Sign up

Export Citation Format

Share Document