Effect of heat treatment and welding on mechanical properties of low-alloy molybdenum alloys in a wide temperature range

2000 ◽  
Vol 42 (7) ◽  
pp. 283-288
Author(s):  
V. V. Bukhanovskii
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Wide Temperature Range ◽  
Temperature Range ◽  
Molybdenum Alloys

Mechanical And Superconducting Properties Of Cu-Nb3Sn In Situ Produced Composite Wires

1981 ◽  
Vol 12 ◽  
Author(s):  
A. Kolb-Telieps ◽  
B.L. Mordike ◽  
M. Mrowiec
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Yield Strength ◽  
Wide Temperature Range ◽  
Volume Fraction ◽  
Superconducting Properties ◽  
Temperature Range ◽  
Composite Wires ◽  
Strength And Ductility

ABSTRACTCu-Nb composite wires were produced from powder, electrolytically coated with tin and annealed to convert the Nb fibres to Nb 3Sn. The content was varied between 10 wt % and 40 wt %. The superconducting properties of the wires were determined. The mechanical properties, tensile strength, yield strength and ductility were measured as a function of volume fraction and deformation over a wide temperature range. The results are compared with those for wires produced by different techniques.

The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel

2007 ◽  
Vol 26-28 ◽  
pp. 511-514 ◽  
Author(s):  
Nam Yong Kim ◽  
Jeoung Han Kim ◽  
Yu Sik Kong ◽  
Jong Won Yoon ◽  
Jong Taek Yeom ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Weld Joint ◽  
Friction Welding ◽  
Rotation Speed ◽  
Post Weld Heat Treatment ◽  
Alloy 718 ◽  
Temperature Range ◽  
Heat Treated ◽  
Weld Heat

The effect of post weld heat treatment on mechanical properties of friction welded Alloy 718 and SNCRW was investigated. Friction welding tests were carried out at a constant rotation speed and pressure. Optimum friction condition was found to be the friction pressure of 25kg/cm2, friction time of 40sec, upset pressure of 80 kg/cm2, and dwell time of 5sec. After friction welding tests, post weld heat treatments were performed in the temperature range of 500-900°C for 8hrs in order to investigate the microstructure and mechanical properties of weld joint. Specimens with the post weld heat treatment at 720°C for 8hrs show optimal mechanical properties. Residual stress of post weld heat treated specimens was measured to weld joint in the same temperature range. After friction welding tests on samples with a diameter of 80mm, tensile properties of post-weld-heat-treated and non-heat-treated samples were compared.

Sign in / Sign up

Export Citation Format

Share Document