Ion exchange of Cs ion in acid solution with potassium cobalt hexacyanoferrate

2004 ◽  
Vol 21 (5) ◽  
pp. 1026-1031 ◽  
Author(s):  
Jei-Kwon Moon ◽  
Eil-Hee Lee ◽  
Hyung-Tae Kim

Author(s):  
György Pátzay ◽  
József Dobor ◽  
Emil Csonka ◽  
Gábor Lozsi ◽  
Ferenc Feil

Borate ion exchange capacity of Purolite NRW600 strong base anion resin in hydroxide form and mixed bed NRW600+NRW100 ion exchange was investigated with static experiments. Anion exchange resin was saturated with 0.1–45 g/dm3 concentration boric acid solution in a static mixer at 20, 30, 40 and 50 °C at 150 rpm for 24 hours. Remaining borate content of saturation solutions was deter-mined with ion chromatography and ICP-OES. The amount of fixed borate as borate anions increased with the saturation borate concentration as well as in case of simple anion exchange as in case of mixed bed.Column sorption-elution study was carried out by using strong base anion exchange resins (Purolite NRW600 and Amberlite IRN78). Resins in hydroxide and in chloride forms were saturated in column with 5–40 g/dm3 boric acid solution in excess. The resin was then eluted with 200 cm3 salt free water with 5 cm3/min at 25 °C and then eluted by 1 mol/dm3 sodium-sulfate solution with 5 cm3/min. The effluent was collected and analyzed for borate content by titrimetric method. In chloride form the resin adsorbed and released much less borate. Effective borate and polyborate sorption needs hydroxide ions in resin phase.



1999 ◽  
Vol 16 (5) ◽  
pp. 571-575 ◽  
Author(s):  
Sung Ho Lee ◽  
Kwang Rag Kim ◽  
Chong Hun Jung ◽  
Hongsuk Chung






2016 ◽  
Vol 4 (25) ◽  
pp. 9781-9788 ◽  
Author(s):  
Hoa Thi Bui ◽  
Do Young Ahn ◽  
Nabeen K. Shrestha ◽  
Myung M. Sung ◽  
Joong Kee Lee ◽  
...  

1-D array of Co3[Fe(CN)6]2 film obtained by ion exchange mediated chemical transformation route from Co(CO3)0.35Cl0.20(OH)1.10 demonstrated an enhanced electrocatalytic oxidation of alkaline and neutral water.



Author(s):  
Nargiza Bekbutaeva ◽  
◽  
◽  

The results of studies of the forms of finding and methods of extracting molybdenum from acidic solutions with a high concentration of sulfuric acid are presented. Ion-exchange resins of various modifications were tested to determine the most effective for molybdenum during its sorption from a sulfuric acid solution.



Author(s):  
Aibassov Erkin Zhakenovich ◽  
Yemelyanova Valentina Stepanovna ◽  
Shakieva Tatyana ◽  
Tussupbaev Nessipbay ◽  
Bulenbaiev Maxat ◽  
...  


2000 ◽  
Vol 36 (3) ◽  
pp. 327-329 ◽  
Author(s):  
P. I. Kulintsov ◽  
O. V. Bobreshova ◽  
I. V. Aristov ◽  
I. V. Novikova ◽  
L. A. Khrykina


Sign in / Sign up

Export Citation Format

Share Document