Unsteady dynamic processes in a "cylindrical tank — viscous fluid" system

1996 ◽  
Vol 32 (8) ◽  
pp. 639-645
Author(s):  
Ya. F. Kayuk ◽  
Yu. A. Ivanov ◽  
M. K. Shekera
Keyword(s):  
Viscous Fluid ◽  
Dynamic Processes ◽  
Cylindrical Tank ◽  
Fluid System

Numerical investigation of particle–particle and particle–wall collisions in a viscous fluid

2008 ◽  
Vol 596 ◽  
pp. 437-466 ◽  
Author(s):  
A. M. ARDEKANI ◽  
R. H. RANGEL
Keyword(s):  
Viscous Fluid ◽  
Vortex Dynamics ◽  
Experimental Studies ◽  
Stokes Number ◽  
Coefficient Of Restitution ◽  
Computational Method ◽  
Particle Collisions ◽  
Fluid System ◽  
Collision Model ◽  
Good Agreement

The dynamics of particle–particle collisions and the bouncing motion of a particle colliding with a wall in a viscous fluid is numerically investigated. The dependence of the effective coefficient of restitution on the Stokes number and surface roughness is analysed. A distributed Lagrange multiplier-based computational method in a solid–fluid system is developed and an efficient method for predicting the collision between particles is presented. A comparison between this method and previous collision strategies shows that the present approach has some significant advantages over them. Comparison of the present methodology with experimental studies for the bouncing motion of a spherical particle onto a wall shows very good agreement and validates the collision model. Finally, the effect of the coefficient of restitution for a dry collision on the vortex dynamics associated with this problem is discussed.

Surface reactions observed by photoemission electron microscopy (PEEM)

1992 ◽  
Vol 50 (1) ◽  
pp. 286-287
Author(s):  
H.H. Rotermund
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Work Function ◽  
Chemical Reactions ◽  
Reaction Diffusion ◽  
Dynamic Processes ◽  
Clean Surface ◽  
Crystal Surfaces ◽  
Single Crystal Surfaces ◽  
Photoemission Electron

Chemical reactions at a surface will in most cases show a measurable influence on the work function of the clean surface. This change of the work function δφ can be used to image the local distributions of the investigated reaction,.if one of the reacting partners is adsorbed at the surface in form of islands of sufficient size (Δ>0.2μm). These can than be visualized via a photoemission electron microscope (PEEM). Changes of φ as low as 2 meV give already a change in the total intensity of a PEEM picture. To achieve reasonable contrast for an image several 10 meV of δφ are needed. Dynamic processes as surface diffusion of CO or O on single crystal surfaces as well as reaction / diffusion fronts have been observed in real time and space.

Dynamic processes in dielectric glasses at low temperatures

1982 ◽  
Vol 136 (2) ◽  
pp. 317 ◽  
Author(s):  
B.P. Smolyakov ◽  
E.P. Khaimovich
Keyword(s):  
Low Temperatures ◽  
Dynamic Processes

TO THE STABILITY OF TANK VEHICLES IN THE BRAKE MODE

2019 ◽  
pp. 27-32
Author(s):  
Denys Popelysh ◽  
Yurii Seluk ◽  
Sergyi Tomchuk
Keyword(s):  
Mathematical Model ◽  
Control Systems ◽  
Distribution Systems ◽  
Traffic Accidents ◽  
Road Traffic ◽  
Center Of Mass ◽  
Dynamic Processes ◽  
Course Stability ◽  
The Stability ◽  
Tank Vehicles

This article discusses the question of the possibility of improving the roll stability of partially filled tank vehicles while braking. We consider the dangers associated with partially filled tank vehicles. We give examples of the severe consequences of road traffic accidents that have occurred with tank vehicles carrying dangerous goods. We conducted an analysis of the dynamic processes of fluid flow in the tank and their influence on the basic parameters of the stability of vehicle. When transporting a partially filled tank due to the comparability of the mass of the empty tank with the mass of the fluid being transported, the dynamic qualities of the vehicle change so that they differ significantly from the dynamic characteristics of other vehicles. Due to large displacements of the center of mass of cargo in the tank there are additional loads that act vehicle and significantly reduce the course stability and the drivability. We consider the dynamics of liquid sloshing in moving containers, and give examples of building a mechanical model of an oscillating fluid in a tank and a mathematical model of a vehicle with a tank. We also considered the method of improving the vehicle’s stability, which is based on the prediction of the moment of action and the nature of the dynamic processes of liquid cargo and the implementation of preventive actions by executive mechanisms. Modern automated control systems (anti-lock brake system, anti-slip control systems, stabilization systems, braking forces distribution systems, floor level systems, etc.) use a certain list of elements for collecting necessary parameters and actuators for their work. This gives the ability to influence the course stability properties without interfering with the design of the vehicle only by making changes to the software of these systems. Keywords: tank vehicle, roll stability, mathematical model, vehicle control systems.

Sign in / Sign up

Export Citation Format

Share Document