Discrete element method investigation of the milling characteristic in a rice mill

A milling chamber consisting of a rice sieve and a rotating roller plays critical roles in modulating the milling performance of rice grains. However, the mechanism of how the geometries of the rice sieve and rotating roller affect the particle collisions and the interaction time remains not fully understood. Our experimental results show that the milling degree and rate of broken rice of the octagonal rice sieve are largest among the hexagonal sieve, octagonal sieve, and circular sieve. Through the discrete element method, we illustrate that the peak milling degree at the octagonal sieve is attributed to the competition between the decreasing force and increasing milling time with the increase in edges. In addition, the geometries of the convex ribs of the rotating roller are investigated to optimize the structure of the milling chamber. In the left-hand spiral or right-hand spiral of the convex ribs, the rice particles are accumulated in the inlet or outlet regions, respectively, which leads to an uneven milling degree in the axial direction. The uniformity of a milling process can be promoted by increasing the number of convex ribs, which will reduce the milling degree on the other hand.

Interface topology and evolution of particle patterns on deformable drops in turbulence

The capture of neutrally buoyant, sub-Kolmogorov particles at the interface of deformable drops in turbulent flow and the subsequent evolution of particle surface distribution are investigated. Direct numerical simulation of turbulence, phase-field modelling of the drop interface dynamics and Lagrangian particle tracking are used. Particle distribution is obtained considering excluded-volume interactions, i.e. by enforcing particle collisions. Particles are initially dispersed in the carrier flow and are driven in time towards the surface of the drops by jet-like turbulent fluid motions. Once captured by the interfacial forces, particles disperse on the surface. Excluded-volume interactions bring particles into long-term trapping regions where the average surface velocity divergence sampled by the particles is zero. These regions correlate well with portions of the interface characterized by higher-than-mean curvature, indicating that modifications of the surface tension induced by the presence of very small particles will be stronger in the highly convex regions of the interface.

Lifting of Tribocharged Grains by Martian Winds

It is a long-standing open question whether electrification of wind-blown sand due to tribocharging—the generation of electric charges on the surface of sand grains by particle–particle collisions—could affect rates of sand transport occurrence on Mars substantially. While previous wind tunnel experiments and numerical simulations addressed how particle trajectories may be affected by external electric fields, the effect of sand electrification remains uncertain. Here we show, by means of wind tunnel simulations under air pressure of 20 mbar, that the presence of electric charges on the particle surface can reduce the minimal threshold wind shear velocity for the initiation of sand transport, u *ft, significantly. In our experiments, we considered different samples, a model system of glass beads as well as a Martian soil analog, and different scenarios of triboelectrification. Furthermore, we present a model to explain the values of u *ft obtained in the wind tunnel that is based on inhomogeneously distributed surface charges. Our results imply that particle transport that subsides, once the wind shear velocity has fallen below the threshold for sustained transport, can more easily be restarted on Mars than previously thought.

Synthesis of metallic aluminum particles by electrolysis in aqueous solution

The present work proposes a method for fabricating metallic Al particles in aqueous solution. An aqueous colloidal solution was prepared from an aqueous aluminum nitrate nonahydrate solution by electrolysis using metallic Al plates as the anode and cathode under ultrasonic irradiation in water at 25–45 °C. The sizes of the particles in the colloidal solutions prepared at 25, 35, and 45 °C were 76.3, 77.0, and 84.7 nm, respectively. The powder obtained from the colloidal solution prepared at 25 °C was not crystalline. By contrast, the powders obtained from the colloidal solutions prepared at 35 and 45 °C had a crystal structure of cubic Al and crystal sizes of 55.7 and 59.3 nm, respectively. Thus, elevated temperatures promoted both particle growth and crystal growth, which was explained by higher temperatures increasing the frequency and energy of particle collisions. The metallic Al particles were chemically stable in both an aqueous solution and the ambient atmosphere. The chemically stable metallic Al particles are expected to be used as sources for fabricating materials related to fuels, energy storage, and pigments.

Research on Particle Collision Forward Search Algorithm and the CFD-DEM Variable Time Step Coupling Calculation Method

In CFD-DEM coupling calculations, an excessively large selection for particle calculation time step affects the calculation accuracy, and an extremely small selection affects the calculation efficiency. A search ball is constructed by taking each target particle as the center particle with the fastest displacement in the calculation domain. Subsequently, the particles that may collide are screened to establish a search list, and a forward search method is used to determine particle collisions. Finally, a particle calculation time step is proposed. The improved DEM method, which automatically adjusts the collision time, resolves the contradiction between particle calculation time step selection, accuracy, and efficiency. The relative error between the numerical simulation results of particle collision and the theoretical solution was less than 3%. The three calculation time steps selected in this study can guarantee excellent calculation accuracy and efficiency. For multi-particle and fluid coupling simulations, the traditional CFD-DEM method selects 10-7s or less in the calculation time step to obtain an accurate solution. The method proposed in this paper selects 10-5s to obtain an accurate solution, which increased the calculation efficiency by 19.8%.

Soft gravitational radiation from multi-body collisions

We derive a universal expression for the gravitational radiation energy spectrum dEGW/dω at sub-leading order emitted from a generic gravitational hard scattering of multi-particles or multi-bodies. Our result includes all $$ \mathcal{O} $$ O (ω) corrections to the gravitational radiation flux from a generic 2 → N collision, in both the cases of massless and massive particles/bodies. We also show the dependence of the radiation energy flux by the quantum spin in case of particle collisions. Then, we consider the specific case of a gravitational elastic scattering of two massive bodies, i.e. m + M → m + M with m, M the masses of the two bodies respectively. We demonstrate that in this case all $$ \mathcal{O} $$ O (ω) contributions to the energy flux exactly cancel each others. Nevertheless, we also show that, for a 2 → 2 inelastic scattering, the inclusion of sub-leading soft gravitons leads to a not zero radiation flux, having a simple expression in certain asymptotic regimes. Our results can be applied to the case of Black Hole collisions with possible testable implications in gravitational waves physics.

Quantum imprints of gravitational shockwaves

Gravitational shockwaves are simple exact solutions of Einstein equations representing the fields of ultrarelativistic sources and idealized gravitational waves (shocks). Historically, much work has focused on shockwaves in the context of possible black hole formation in high energy particle collisions, yet they remain at the forefront of research even today. Representing hard modes in the bulk, shocks give rise to the gravitational memory effect at the classical level and implant supertranslation (BMS) hair onto a classical spacetime at the quantum level. The aim of this paper is to further our understanding of the ‘information content’ of such supertranslations. Namely, we show that, contrary to the several claims in the literature, a gravitational shockwave does leave a quantum imprint on the vacuum state of a test quantum field and that this imprint is accessible to local observers carrying Unruh-DeWitt (UDW) detectors in this spacetime.

J. David Jackson (January 19, 1925–May 20, 2016): A Biographical Memoir

John David (“Dave”) Jackson, a Canadian-born theoretical physicist, contributed significantly to particle, nuclear, and atomic physics. He is best known, however, for his text Classical Electrodynamics, which has been a fixture in physics graduate education around the world for more than 50 years. It is generally referred to simply as “Jackson.” This textbook, which has inspired fear and wonder alike in generations of students, clearly reflects the author's fascination with physical phenomena, his renowned mathematical dexterity, and his appreciation of the elegance of physical laws. Jackson's major contributions to research included the theory of muon-catalyzed fusion; the analysis, with Kurt Gottfried, of angular distributions in quasi-two-body elementary particle collisions; and the elucidation of charmonium-state decays. Jackson influenced the development of physics research throughout the United States as well as internationally—particularly through his work on the nascent Superconducting Super Collider. An active promoter of civil liberties and human rights, he was one of the leaders of the efforts to free Andrei Sakharov, Yuri Orlov, and Anatoly Shcharansky from Soviet imprisonment.