Oxygen isotope kinetics of skarn type deposit from Anqing in China

1998 ◽  
Vol 43 (S1) ◽  
pp. 49-49
Author(s):  
Guo Jibao ◽  
Qian Yaqian ◽  
Huang YaoSheng
1975 ◽  
Vol 72 (11) ◽  
pp. 4612-4616 ◽  
Author(s):  
G. C. Liu ◽  
E. H. Ahrens ◽  
P. H. Schreibman ◽  
P. Samuel ◽  
D. J. McNamara ◽  
...  

2016 ◽  
Vol 48 (3) ◽  
pp. 368-373 ◽  
Author(s):  
Christian von Sperber ◽  
Hans Lewandowski ◽  
Federica Tamburini ◽  
Stefano M. Bernasconi ◽  
Wulf Amelung ◽  
...  

2004 ◽  
Vol 49 (S1) ◽  
pp. 72-78 ◽  
Author(s):  
Dayong Liu ◽  
Jinzhong Liu ◽  
Ping’an Peng ◽  
Yanhua Shuai

2021 ◽  
pp. 120646
Author(s):  
Justin A. Hayles ◽  
Bryan A. Killingsworth

Author(s):  
J. F. DeNatale ◽  
D. G. Howitt

The electron irradiation of silicate glasses containing metal cations produces various types of phase separation and decomposition which includes oxygen bubble formation at intermediate temperatures figure I. The kinetics of bubble formation are too rapid to be accounted for by oxygen diffusion but the behavior is consistent with a cation diffusion mechanism if the amount of oxygen in the bubble is not significantly different from that in the same volume of silicate glass. The formation of oxygen bubbles is often accompanied by precipitation of crystalline phases and/or amorphous phase decomposition in the regions between the bubbles and the detection of differences in oxygen concentration between the bubble and matrix by electron energy loss spectroscopy cannot be discerned (figure 2) even when the bubble occupies the majority of the foil depth.The oxygen bubbles are stable, even in the thin foils, months after irradiation and if van der Waals behavior of the interior gas is assumed an oxygen pressure of about 4000 atmospheres must be sustained for a 100 bubble if the surface tension with the glass matrix is to balance against it at intermediate temperatures.


Author(s):  
R. J. Lauf

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain a layer of pyrolytic silicon carbide to act as a miniature pressure vessel and primary fission product barrier. Optimization of the SiC with respect to fuel performance involves four areas of study: (a) characterization of as-deposited SiC coatings; (b) thermodynamics and kinetics of chemical reactions between SiC and fission products; (c) irradiation behavior of SiC in the absence of fission products; and (d) combined effects of irradiation and fission products. This paper reports the behavior of SiC deposited on inert microspheres and irradiated to fast neutron fluences typical of HTGR fuel at end-of-life.


Sign in / Sign up

Export Citation Format

Share Document