Mechanical behavior of U-shaped bellows and shape optimal design using multiple objective optimization method

KSME Journal ◽  
1995 ◽  
Vol 9 (1) ◽  
pp. 91-101 ◽  
Author(s):  
Byoung-Gab Ko ◽  
Gyung-Jin Park ◽  
Wan-Ik Lee
Author(s):  
CHAOFANG HU ◽  
SHAOYUAN LI

This paper proposes an enhanced interactive satisfying optimization method based on goal programming for the multiple objective optimization problem with preemptive priorities. Based on the previous method, the approach presented makes the higher priority achieve the higher satisfying degree. For three fuzzy relations of the objective functions, the corresponding optimization models are proposed. Not only can satisfying results for all the objectives be acquired, but the preemptive priority requirement can also be simultaneously actualized. The balance between optimization and priorities is realized. We demonstrate the power of this proposed method by illustrative examples.


2015 ◽  
Vol 2015 (0) ◽  
pp. _J1030205--_J1030205- ◽  
Author(s):  
Yuki MIMURA ◽  
Masayuki ICHIMONJI ◽  
Kyohei HIRAI ◽  
Toshikazu NAGATA ◽  
Toshiaki HIRATE ◽  
...  

Author(s):  
CHAOFANG HU ◽  
SHAOYUAN LI

This paper presents a two-phase interactive satisfying optimization method for fuzzy multiple objectives optimization with linguistic preference. This proposed approach utilizes the view that the more important objective has the higher desirable satisfying degree. The originally complex optimization problem is simplified and divided into two parts that are solved one by one. The decision maker can acquire satisfying solution of all the objectives under linguistic preference. Numerical example shows the efficiency, flexibility, and sensitivity of the proposed method.


2012 ◽  
Vol 61 (1) ◽  
pp. 115-123 ◽  
Author(s):  
Norio Takahashi ◽  
Shunsuke Nakazaki ◽  
Daisuke Miyagi ◽  
Naoki Uchida ◽  
Keiji Kawanaka ◽  
...  

3-D optimal design of laminated yoke of billet heater for rolling wire rod using ON/OFF method The optimization method using the ON/OFF sensitivity analysis has an advantage that an epoch-making construction of magnetic circuit may be obtained. Therefore, it is attractive for designers of magnetic devices. We have already developed the ON/OFF method for the optimization of a static magnetic field problem, and the effectiveness is verified by applying it to the optimization of magnetic recording heads. In this paper, the ON/OFF sensitivity method is extended to the optimization of the eddy current problem using the adjoint variable. The newly developed ON/OFF method is applied to the determination of the optimal topology of the yoke of the billet heater for rolling wire rod. As a result, the optimal shape of yoke, which we could not imagine beforehand can be obtained. It is shown that the local heating of the yoke was reduced without decreasing the heating efficiency.


Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 671
Author(s):  
Xiaoying Zhou ◽  
Feier Wang ◽  
Kuan Huang ◽  
Huichun Zhang ◽  
Jie Yu ◽  
...  

Predicting and allocating water resources have become important tasks in water resource management. System dynamics and optimal planning models are widely applied to solve individual problems, but are seldom combined in studies. In this work, we developed a framework involving a system dynamics-multiple objective optimization (SD-MOO) model, which integrated the functions of simulation, policy control, and water allocation, and applied it to a case study of water management in Jiaxing, China to demonstrate the modeling. The predicted results of the case study showed that water shortage would not occur at a high-inflow level during 2018–2035 but would appear at mid- and low-inflow levels in 2025 and 2022, respectively. After we made dynamic adjustments to water use efficiency, economic growth, population growth, and water resource utilization, the predicted water shortage rates decreased by approximately 69–70% at the mid- and low-inflow levels in 2025 and 2035 compared to the scenarios without any adjustment strategies. Water allocation schemes obtained from the “prediction + dynamic regulation + optimization” framework were competitive in terms of social, economic and environmental benefits and flexibly satisfied the water demands. The case study demonstrated that the SD-MOO model framework could be an effective tool in achieving sustainable water resource management.


Sign in / Sign up

Export Citation Format

Share Document