RP-HPLC method for the quantitative determination of fexofenadine hydrochloride in coated tablets and human serum

2009 ◽  
Vol 20 (1) ◽  
pp. 55-61 ◽  
Author(s):  
M. Saeed Arayne ◽  
Najma Sultana ◽  
Hina Shehnaz ◽  
Amir Haider
Author(s):  
Hina Shamshad ◽  
Ali Sayqal ◽  
Jahan Zeb ◽  
Agha Zeeshan Mirza

Abstract A simple, accurate and precise RP-HPLC method was developed for the simultaneous determination of chloroquine, pyrimethamine and cetirizine hydrochloride concentrations in bulk drug and human serum. The assay was performed using a mobile phase of methanol: water (70:30) at pH of 2.8 ± 0.05 on the Purospher C-18 column with UV detection at 230 nm and rosuvastatin used as an internal standard. The retention times observed for chloroquine, pyrimethamine and cetirizine hydrochloride were 3.5, 2.5 and 5.5 minutes, respectively. The method was found to be specific for the assayed drugs showing a linear response in the concentration range of 1–100 μg mL−1 with coefficients of determination values of (r = 0.999). The method was developed and validated according to ICH guidelines. The method was used to monitor the serum samples and was found to be sensitive for therapeutic purposes, showing the potential to be a useful tool for routine analysis in laboratories.


2018 ◽  
Vol 4 (5) ◽  
pp. 702-705 ◽  
Author(s):  
Sreenivasa Charan Archakam ◽  
Sridhar Chenchugari ◽  
Chandrasekhar Kothapalli Banoth

2020 ◽  
Vol 10 (1) ◽  
pp. 76-86 ◽  
Author(s):  
Santosh A. Kumbhar ◽  
Chandrakant R. Kokare ◽  
Birendra Shrivastava ◽  
Hira Choudhury

Background: It has been hypothesized that delivery of aripiprazole through nanoemulsion formulation would better deliver the drug into the central nervous system to treat major depressive conditions in psychological patients. Due course of formulation development, to determine solubility of the drug in different matrices and nanoemulsion is an important step. Materials & Methods: Therefore, a simple, rapid and selective reversed phase high performance liquid chromatographic (RP-HPLC) method was developed and validated for the determination of aripiprazole as per International Conference of Harmonization (ICH) guidelines. Satisfactory analysis method was employed for the quantitative determination of aripiprazole during pre-formulation development. Results and Discussion: The separation technique was achieved using the mobile phases of methanol-acetonitrile, 80:20 (v/v) delivered at 1.0 mL.min-1 flow rate through HIQ SIL C18 250x4.6 mm (5 μm particle size) column and detected at 218 nm wavelength. The method depicted linear calibration plots within the range of 5 to 50 µg.mL-1 with a determination coefficient (r2) of 0.9991 calculated by least square regression method. The validated method was sensitive with LOD of 10.0 ng.mL-1 and 30.0 ng.mL-1 of LOQ. The intra-day and inter-day precision values were ranged between 0.37-0.89 and 0.63-1.11 respectively, with accuracy ranging from 98.24 to 100.88 and 97.03 to 100.88, respectively. This developed and validated method was found to be sensitive for the determination of aripiprazole for the first time from various oils, surfactants, co-surfactants, and nanoemulsion formulation. Conclusion: This RP-HPLC method was successfully implemented for the quantitative determination of aripiprazole at developmental stages of nanoemulsion formulation.


2013 ◽  
Vol 96 (1) ◽  
pp. 56-59 ◽  
Author(s):  
Agha Zeeshan Mirza ◽  
M Saeed Arayne ◽  
Najma Sultana

Abstract The objective of this research was to develop and validate a rapid, economical, and sensitive HPLC method for quantitative determination of gliquidone, pioglitazone hydrochloride, and atorvastatin in tablets and serum. Due to drug combination of these formulations, there has been a need for a reliable quantitative method to determine these drugs in commercial samples and human serum. The chromatographic separation was carried out at ambient temperature with a mobile phase consisting of methanol–water (90 + 10, v/v), with pH adjusted to 3.50 with phosphoric acid. The pump was operated at a flow rate of 1 mL/min, and all analytes were detected at 235 nm. The method was linear over the concentration range of 5–50 μg/mL for all the drugs. The LOD of gliquidone, pioglitazone hydrochloride, and atorvastatin was 0.30, 1.30, and 0.57 μg/mL and LOQ was 0.98, 4.28, and 1.90 μg/mL, respectively. The proposed method was successfully applied to the determination of these drugs in commercial tablets and human serum. The established method was validated with respect to specificity, linearity, precision, accuracy, and ruggedness.


2015 ◽  
Vol 13 (2) ◽  
pp. 125-131
Author(s):  
Anisa Alam Tanam ◽  
Mohammad Firoz Khan ◽  
Ridwan Bin Rashid ◽  
Md Zakir Sultan ◽  
Mohammad A Rashid

Acetaminophen (paracetamol) is an analgesic and antipyretic agent with minimum anti-inflammatory properties. In the present study a simple, fast, accurate, precise and reproducible RP-HPLC method has been developed and validated for the quantification of paracetamol in human serum samples using theophylline as internal standard. Protein precipitation with perchloric acid was employed in the extraction of paracetamol and theophylline from biological matrix. The chromatographic separation was accomplished on Phenomenex C18 column with a mobile phase comprising of 0.05 mM sodium sulfate buffer (pH 2.2 ± 0.02 adjusted with phosphoric acid) and acetonitrile at a ratio of 93:7 at a flow rate of 1.0 ml/min. The chromatogram was monitored by UV detection at a wavelength of 254 nm. The method was validated over a linear concentration range of 2-100 ?g/ml and limit of quantification (LOQ) was 1.61 ?g/ml with a correlation coefficient (r2) 0.997. The intra-day and inter-day precision expressed as relative standard deviation were found to be 0.49 - 2.68% and 0.36 - 3.44%, respectively. The average recovery of paracetamol from serum ranged from 99.0 - 106.4%. The method was successfully applied to a pharmacokinetic study after oral administration of immediate release paracetamol tablet (1000 mg) in four healthy Bangladeshi volunteers. The mean Cmax was found to be 11.03 ± 3.21 ?g/ml, which occurred at Tmax of 0.88 ± 0.14 hr. The half life, AUC0-8 and AUC0-? values were found to be 3.09 ± 0.71 hr, 31.06 ± 6.57 hr-?g/ml and 37.92 ± 9.51 hr- ?g/ml, respectively. DOI: http://dx.doi.org/10.3329/dujps.v13i2.21889 Dhaka Univ. J. Pharm. Sci. 13(2): 125-131, 2014 (December)


2007 ◽  
Vol 30 (11) ◽  
pp. 1677-1685 ◽  
Author(s):  
Ramesh Gannu ◽  
Vamshi Vishnu Yamsani ◽  
Yamsani Madhusudan Rao
Keyword(s):  

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hina Shamshad ◽  
Agha Zeeshan Mirza

Abstract Background Present work describes a fast, simple, and sensitive procedure for the simultaneous determination of cetirizine in the presence of quinolones using diclofenac sodium as an internal standard. The present work was designed to analyze these compounds in pharmaceutical and clinical labs being economical for use. Results The mobile phase consisted of the simple composition of methanol, acetonitrile, and water in a ratio of 50:20:30 with a pH adjusted to 3.1 at a flow rate of 1 mL min−1. The UV detection was performed at 225 nm. The linearity was assessed over the range of 2.5–50 μg mL−1 for all drugs. The parameters such as accuracy, precision, linearity (>0.999), and sensitivity were satisfactory. Conclusion The method was equally applicable for formulation and human serum with recovery values between 95 and 105%. The results of the method were validated statistically according to ICH guidelines.


Sign in / Sign up

Export Citation Format

Share Document