RP-LC Method for the Simultaneous Determination of Gliquidone, Pioglitazone Hydrochloride, and Atorvastatin in Formulations and Human Serum

2013 ◽  
Vol 96 (1) ◽  
pp. 56-59 ◽  
Author(s):  
Agha Zeeshan Mirza ◽  
M Saeed Arayne ◽  
Najma Sultana
Keyword(s):  
Phosphoric Acid ◽  
Quantitative Determination ◽  
Human Serum ◽  
Flow Rate ◽  
Drug Combination ◽  
Mobile Phase ◽  
Quantitative Method ◽  
Hplc Method ◽  
Established Method

Abstract The objective of this research was to develop and validate a rapid, economical, and sensitive HPLC method for quantitative determination of gliquidone, pioglitazone hydrochloride, and atorvastatin in tablets and serum. Due to drug combination of these formulations, there has been a need for a reliable quantitative method to determine these drugs in commercial samples and human serum. The chromatographic separation was carried out at ambient temperature with a mobile phase consisting of methanol–water (90 + 10, v/v), with pH adjusted to 3.50 with phosphoric acid. The pump was operated at a flow rate of 1 mL/min, and all analytes were detected at 235 nm. The method was linear over the concentration range of 5–50 μg/mL for all the drugs. The LOD of gliquidone, pioglitazone hydrochloride, and atorvastatin was 0.30, 1.30, and 0.57 μg/mL and LOQ was 0.98, 4.28, and 1.90 μg/mL, respectively. The proposed method was successfully applied to the determination of these drugs in commercial tablets and human serum. The established method was validated with respect to specificity, linearity, precision, accuracy, and ruggedness.

scholarly journals Application of RP-HPLC method for the simultaneous determination of cetirizine in the presence of quinolones

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Hina Shamshad ◽  
Agha Zeeshan Mirza
Keyword(s):  
Human Serum ◽  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
Diclofenac Sodium ◽  
Internal Standard ◽  
Hplc Method ◽  
Rp Hplc ◽  
Ich Guidelines

Abstract Background Present work describes a fast, simple, and sensitive procedure for the simultaneous determination of cetirizine in the presence of quinolones using diclofenac sodium as an internal standard. The present work was designed to analyze these compounds in pharmaceutical and clinical labs being economical for use. Results The mobile phase consisted of the simple composition of methanol, acetonitrile, and water in a ratio of 50:20:30 with a pH adjusted to 3.1 at a flow rate of 1 mL min−1. The UV detection was performed at 225 nm. The linearity was assessed over the range of 2.5–50 μg mL−1 for all drugs. The parameters such as accuracy, precision, linearity (>0.999), and sensitivity were satisfactory. Conclusion The method was equally applicable for formulation and human serum with recovery values between 95 and 105%. The results of the method were validated statistically according to ICH guidelines.

scholarly journals Quantitative Determination by HPLC-DAD of Icariin, Epimedin A, Epimedin B, and Epimedin C in Epimedium (Berberidaceae) Species Growing in Turkey

2016 ◽  
Vol 11 (11) ◽  
pp. 1934578X1601101 ◽  
Author(s):  
Derya Cicek Polat ◽  
Maksut Coskun
Keyword(s):  
Quantitative Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
Hplc Method ◽  
Biologically Active ◽  
Array Detector ◽  
Diode Array ◽  
Gradient System ◽  
Diode Array Detector

The genus Epimedium is rich in terms of flavonoids, of which icariin, epimedin A, epimedin B and epimedin C are known especially to be biologically active. Therefore, it is important to quantify these compounds. In this study, a HPLC method coupled with DAD detection was developed and validated for the determination of icariin, epimedin A, epimedin B and epimedin C in Epimedium species growing in Turkey. The chromatographic separation was performed using a gradient system with a mobile phase of 0.1% formic acid (A) and acetonitrile (B) applied at a flow rate of 1 mL/min using a diode array detector. The highest values were, respectively, icariin 0.65%, epimedin A 0.13%, epimedin B 0.11%, epimedin C 0.06%. The highest values were obtained from the materials collected in Uzungol (Trabzon-Turkey).

Simultaneous Determination of Oleanolic Acid and Ursolic Acid in Leaves of Paulownia by HPLC

2013 ◽  
Vol 781-784 ◽  
pp. 787-791 ◽  
Author(s):  
Ya Li Xing ◽  
Liang Wu Bi ◽  
Zhen Dong Zhao ◽  
Tian Juan Xia
Keyword(s):  
Phosphoric Acid ◽  
Simultaneous Determination ◽  
Ursolic Acid ◽  
Oleanolic Acid ◽  
Flow Rate ◽  
Mobile Phase ◽  
Leaf Extract ◽  
Hplc Method ◽  
Simultaneous Quantification

A quick and accurate HPLC method has been developed for the simultaneous quantification of two bioactive triterpenes, ursolic acid and oleanolic acid in Paulownia leaves. The samples were analyzed on a Shim-pack ODS-CLC (M) (4.6 mm × 250 mm, 5 μm) column kept at 21 °C, using the methanol and aqueous phase containing 0.05%phosphoric acid with the volumetric ratio of 91.7:8.3 as the mobile phase at a flow rate of 0.6 mL/ min, and the detection wavelength was set at 210 nm. The method was validated and applied to the simultaneous quantification of the two triterpenes in Paulownia leaf extract. The standard curves were established in the range of 0.44 ~ 8.75 μg for oleanolic acid and 0.92 ~ 18.37 μg for ursolic acid. The contents of oleanolic acid and ursolic acid in leaves of Paulownia were determinated using the HPLC method and the contents were 3.87 mg/g and 13.61 mg/g, respectively.

QUANTITATIVE DETERMINATION OF CURCUMIN IN TURMERIC POWDER AND TURMERIC–HONEY BALL PILLS BY HPLC

2018 ◽  
Vol 8 (4) ◽  
pp. 42-47
Author(s):  
Tien Nguyen Huu ◽  
Tram Le Thi Bao ◽  
Ngoc Nguyen Thi Nhu ◽  
Thang Phan Phuoc ◽  
Khan Nguyen Viet
Keyword(s):  
Acetic Acid ◽  
Gastric Mucosa ◽  
Quantitative Determination ◽  
Mobile Phase ◽  
Curcuma Longa ◽  
Biological Marker ◽  
Hplc Method ◽  
Chromatography Analysis ◽  
Precision And Accuracy

Background: Curcumin is a major ingredient in turmeric (Curcuma longa L., Zingiberaceae), which has important activities such as anti-tumor, anti-inflammatory, antioxidant, anti-ischemia, protection of gastric mucosa etc,. Curcumin can be considered as a biological marker of turmeric and turmeric products. Objectives: Developing an HPLC method for quantification of curcumin in turmeric powder and turmeric - honey ball pills; applying this method for products on the market. Materials and methods: turmeric powder and turmeric - honey ball pills collected in Thua Thien Hue province. After optimization process, the method was validated and applied to evaluate the content of curcumin. Results: The chromatography analysis was performed with: Zorbaz Eclipse XDB-C18 (150 × 4.6 nm; 5 µm); Mobile phase: acetonitril: 2% acetic acid (45:55), Flow rate was kept constant at 1.0 ml/min; Detector PDA (420 nm). The method was validated for the HPLC system compatibility, specificity, linearity range, precision and accuracy; the recovery greater than 98%. Conclusion: The developed HPLC method can determine curcumin in turmeric powder and turmeric - honey ball pills. Key words: Curcumin, turmeric powder, turmeric-honey ball pills, quantitative determination, HPLC

scholarly journals Box-Behnken Assisted Validation and Optimization of an RP-HPLC Method for Simultaneous Determination of Domperidone and Lansoprazole

Separations ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 5
Author(s):  
Mohd Afzal ◽  
Mohd. Muddassir ◽  
Abdullah Alarifi ◽  
Mohammed Tahir Ansari
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Box Behnken Design ◽  
Rp Hplc ◽  
System Suitability ◽  
Method Optimization ◽  
Key Variables

A highly specific, accurate, and simple RP-HPLC technique was developed for the real-time quantification of domperidone (DOMP) and lansoprazole (LANS) in commercial formulations. Chromatographic studies were performed using a Luna C8(2), 5 μm, 100Å, column (250 × 4.6 mm, Phenomenex) with a mobile phase composed of acetonitrile/2 mM ammonium acetate (51:49 v/v), pH 6.7. The flow rate was 1 mL·min−1 with UV detection at 289 nm. Linearity was observed within the range of 4–36 µg·mL−1 for domperidone and 2–18 µg·mL−1 for lansoprazole. Method optimization was achieved using Box-Behnken design software, in which three key variables were examined, namely, the flow rate (A), the composition of the mobile phase (B), and the pH (C). The retention time (Y1 and Y3) and the peak area (Y2 and Y4) were taken as the response parameters. We observed that slight alterations in the mobile phase and the flow rate influenced the outcome, whereas the pH exerted no effect. Method validation featured various ICH parameters including linearity, limit of detection (LOD), accuracy, precision, ruggedness, robustness, stability, and system suitability. This method is potentially useful for the analysis of commercial formulations and laboratory preparations.

scholarly journals RP-HPLC Determination of Raloxifene in Pharmaceuticl Tablets

2006 ◽  
Vol 3 (1) ◽  
pp. 60-64 ◽  
Author(s):  
P. Venkata Reddy ◽  
B. Sudha Rani ◽  
G. Srinu Babu ◽  
J. V. L. N. Seshagiri Rao
Keyword(s):  
Flow Rate ◽  
Retention Time ◽  
Mobile Phase ◽  
Dosage Forms ◽  
Hplc Method ◽  
Reverse Phase Hplc ◽  
Reverse Phase ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc

A reverse phase HPLC method is developed for the determination of Raloxifene in pharmaceutical dosage forms. Chromatography was carried out on an inertsil C18 column using a mixture of acetonitrile and phosphate buffer (30:70 v/v) as the mobile phase at a flow rate of 1 mL/min. Detection was carried out at 290 nm .The retention time of the drug was 10.609 min. The method produced linear responses in the concentration range of 0.5-200 µg/mL of Raloxifene. The method was found to be applicable for determination of the drug in tablets.

scholarly journals HPLC Quantitative Analysis of Main Stilbenes and Flavones in Different Parts ofMatteuccia struthiopteris

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Shubei Li ◽  
Dong Zhang ◽  
Lan Yang ◽  
Yujie Li ◽  
Xiaoxin Zhu ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Linear Regression ◽  
Phosphoric Acid ◽  
Flow Rate ◽  
Mobile Phase ◽  
Gradient Elution ◽  
Hplc Method ◽  
Regression Coefficients ◽  
The Mean ◽  
Different Parts

A simple and accurate HPLC-UV method was developed for the simultaneous quantitative analysis of main stilbenes and flavones in different parts (fronds, rhizomes, and frond bases) ofM. struthiopteris. The chromatographic separation was performed on a Kromasil C18 column (4.6 mm × 250 mm, 5 μm) with the mobile phase of MeOH-H2O (including 0.1% phosphoric acid) using a gradient elution at the flow rate of 1.0 mL min−1and UV detection at 295 nm. The method was validated by specificity, linearity, accuracy (recovery), and precision tests (repeatability, intra- and interday). For all the six compounds, the linear regression coefficients ranged from 0.9958 to 0.9998 within the test ranges; intra- and interday precisions were<2% and the mean recoveries ranged from 98.09 to 103.56%. The amount of these compounds in the frond bases was almost the same as in the rhizomes but much higher than that in the fronds. The results indicate that the HPLC method developed was appropriate for the analysis of the six compounds in different parts (fronds, rhizomes, and frond bases) ofM. struthiopteris.

Validation of HPTLC and HPLC Methods for the Quantitative Determination of Allyl Disulfide in Some Polyherbal Oils

2012 ◽  
Vol 95 (6) ◽  
pp. 1574-1578
Author(s):  
Nitin Dubey ◽  
Nidhi Dubey ◽  
Rajendra Mehta
Keyword(s):  
Particle Size ◽  
Quantitative Determination ◽  
Silica Gel ◽  
Vegetable Oil ◽  
Flow Rate ◽  
Mobile Phase ◽  
Allium Sativum ◽  
Hplc Separation ◽  
Reliable Marker

Abstract Allium sativum L (garlic) is an essential component of many polyherbal oils used in traditional systems of medicine. Allyl disulfide has been a major component found in vegetable oil macerate of garlic, and can be used as reliable marker for determination of garlic in oil macerates of garlic. The HPLC separation of allyl disulfide was achieved on a Phenomenex Luna C18 (25 cm × 4.6 mm id × 5 μm particle size) column using acetonitrile–water–tetrahydrofuran (70 + 27 + 3, v/v/v) mobile phase at a flow rate of 1.0 mL/min. Quantitation was achieved with UV detection at 298 nm over the concentration range 8–48 μg/mL. HPTLC separation of allyl disulfide was achieved on an aluminum-backed layer of silica gel 60 F254 using n-hexane mobile phase. Quantitation was achieved by densitometric analysis at 298 nm over the 200–1200 ng/band concentration range. The methods were validated according to International Conference on Harmonization guidelines.

scholarly journals Development and Validation of HPLC Method for the Simultaneous Determination of Five Food Additives and Caffeine in Soft Drinks

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Bürge Aşçı ◽  
Şule Dinç Zor ◽  
Özlem Aksu Dönmez
Keyword(s):  
Simultaneous Determination ◽  
Flow Rate ◽  
Mobile Phase ◽  
High Performance ◽  
Food Additives ◽  
Hplc Method ◽  
Soft Drinks ◽  
Phase Ratio ◽  
Potassium Sorbate

Box-Behnken design was applied to optimize high performance liquid chromatography (HPLC) conditions for the simultaneous determination of potassium sorbate, sodium benzoate, carmoisine, allura red, ponceau 4R, and caffeine in commercial soft drinks. The experimental variables chosen were pH (6.0–7.0), flow rate (1.0–1.4 mL/min), and mobile phase ratio (85–95% acetate buffer). Resolution values of all peak pairs were used as a response. Stationary phase was Inertsil OctaDecylSilane- (ODS-) 3V reverse phase column (250 × 4.6 mm, 5 μm) dimensions. The detection was performed at 230 nm. Optimal values were found 6.0 pH, 1.0 mL/min flow rate, and 95% mobile phase ratio for the method which was validated by calculating the linearity (r2>0.9962), accuracy (recoveries ≥ 95.75%), precision (intraday variation ≤ 1.923%, interday variation ≤ 1.950%), limits of detection (LODs), and limits of quantification (LOQs) parameters. LODs and LOQs for analytes were in the range of 0.10–0.19 μg/mL and 0.33–0.63 μg/mL, respectively. The proposed method was applied successfully for the simultaneous determination of the mixtures of five food additives and caffeine in soft drinks.

scholarly journals HPLC method for simultaneous determination of impurities and degradation products in Cardiazol

Pharmacia ◽  
2020 ◽  
Vol 67 (1) ◽  
pp. 29-37
Author(s):  
Iryna Drapak ◽  
Borys Zimenkovsky ◽  
Liudas Ivanauskas ◽  
Ivan Bezruk ◽  
Lina Perekhoda ◽  
...  
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Degradation Products ◽  
Phase 1 ◽  
Simultaneous Detection ◽  
Hplc Method ◽  
Column Temperature ◽  
Degree Of Separation ◽  
Determination Of Impurities

Aim. The aim of study was to develop a simple and accurate procedure that could be applied for the determination of impurities and degradation products in cardiazol. Materials and methods. Separation in samples was carried out with Acquity H-class UPLC system (Waters, Milford, USA) equipped with Acquity UPLC BEH C18 column (2.1 × 50 mm, 1.7 μm) (Waters, Milford, USA). Xevo TQD triple quadrupole mass spectrometer detector (Waters Millford, USA) was used to obtain MS/MS data. Mobile phase A: 0.1% solution of trifluoroacetic acid R in water R; Mobile phase B: acetonitrile R. Samples were chromatographed in gradient mode (Table 1). Flow rate of the mobile phase: 1 ml / min. Column temperature: 30 °С. Detection: at 240 nm wavelength. Injection volume: 10 μl. Results. The retention time of the main substance is about 18.5 minutes. The order of the peak, the retention times and relative retention times: impurity B (12.04, 0.65); impurity А (18.5; 0.98); Cardiazol (18.87; 1.00). The LOD and LOQ values obtained were in the range of 30 ng/mL to 100 ng/mL and 80 ng/mL to 310 ng/mL respectively (with respect to sample concentration of 2 mg/ml). Linearity was established in the range of LOQ level to 0.2% having regression coefficients in the range of 0.9996 to 0.9999. The change in the temperature of the column affects the degree of separation of cardiazol and the impurity A, and thus, with a decrease of 5 ° C, the degree of separation is (1.06), while with increasing this index (3.43). When changing the flow rate of the mobile phase, the degree of separation changes in the following order, with a decrease to 0.9 ml / min separation (1.90), with an increase in speed to 1.1 ml / min (2.45). When the number of mobile phase B decreases by 5%, the degree of separation varies by (2.65), with an increase of 5% (1.82). In comparison with the chromatogram of the tested solution, the substance is not resistant to the action of peroxide, alkaline and acid decomposition. Conclusion. 1) HPLC method was developed and validated for the simultaneous detection and quantitation of impurities formed during the synthesis of cardiazol. 2) The method proved to be sensitive, selective, precise, linear, accurate and stability-indicating.

Sign in / Sign up

Export Citation Format

Share Document