A finite element technique combined with gas-liquid two-phase flow calculation for unsteady free surface flow problems

1998 ◽  
Vol 22 (2) ◽  
pp. 194-202 ◽  
Author(s):  
T. Nakayama ◽  
M. Shibata
Keyword(s):  
Finite Element ◽  
Free Surface ◽  
Two Phase Flow ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Finite Element Technique ◽  
Flow Problems ◽  
Element Technique

A Two-Phase Flow Model with VOF for Free Surface Flow Problems

2012 ◽  
Vol 232 ◽  
pp. 279-283 ◽  
Author(s):  
Wei Zhang ◽  
You Hong Tang ◽  
Cheng Bi Zhao ◽  
Cheng Zhang
Keyword(s):  
Free Surface ◽  
Flow Model ◽  
Two Phase Flow ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Phase Model ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Problems ◽  
Fluid Sloshing

A numerical model based on the two-phase flow model for incompressible viscous fluid with a complex free surface has been developed in this study. The two-step projection method is employed to solve the Navier–Stokes equations in the numerical solutions, and finite difference method on a staggered grid is used throughout the computation. The two-order accurate volume of fluid (VOF) method is used to track the distorted and broken free surfaces. The two-phase model is first validated by simulating the dam break over a dry bed, in which the numerical results and experimental data agree well. Then 2-D fluid sloshing in a horizontally excited rectangular tank at different excitation frequencies is simulated using this two-phase model. The results of this study show that the two-phase flow model with VOF method is a potential tool for the simulation of nonlinear fluid sloshing. These studies demonstrate the capability of the two-phase model to simulate free surface flow problems with considering air movement effects.

scholarly journals The Finite Element Numerical Investigation of Free Surface Newtonian and Non-Newtonian Fluid Flows in the Rectangular Tanks

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Puyang Gao
Keyword(s):  
Finite Element ◽  
Free Surface ◽  
Level Set ◽  
Newtonian Fluid ◽  
Mass Conservation ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Two Phase ◽  
Navier Stokes Equation ◽  
Correction Technique

In this paper, we develop a new computational framework to investigate the sloshing free surface flow of Newtonian and non-Newtonian fluids in the rectangular tanks. We simulate the flow via a two-phase model and employ the fixed unstructured mesh in the computation to avoid the mesh distortion and reconstruction. As for the solution of Navier–Stokes equation, we utilize the SUPG finite element method based on the splitting scheme. The same order interpolation functions are then used for velocity and pressure. Moreover, the moving interface is captured via the concise level set method. We take advantage of the implicit discontinuous Galerkin method to handle the solution of level set and its reinitialization equations. A mass correction technique is also added to ensure the mass conservation property. The dam break-free surface flow is simulated firstly to demonstrate the validity of our mathematical model. In addition, the sloshing Newtonian fluid in the tank with flat and rough bottoms is considered to illustrate the feasibility and robustness of our computational scheme. Finally, the development of free surface for non-Newtonian fluid is also studied in the two tanks, and the influence of power-law index on the sloshing fluid flow is analyzed.

scholarly journals Finite Element Simulation of a Taylor Bubble in Two-Phase Gas-Liquid Slug Flows using Petrov-Galerkin Formulation

2021 ◽  
Vol 18 (3) ◽  
pp. 229-237
Author(s):  
H.A. Abubakar ◽  
A. Yusuf ◽  
Y. Sanusi ◽  
H.A. Dandajeh
Keyword(s):  
Finite Element ◽  
Free Surface Flow ◽  
Surface Flow ◽  
Two Phase ◽  
Systematic Analysis ◽  
Taylor Bubble ◽  
Galerkin Finite Element ◽  
Flow Problems ◽  
Element Simulation ◽  
Good Agreement

Petrov-Galerkin finite element scheme for systematic analysis of the dynamics of a rising Taylor bubble and general free surface flow problems is derived and implemented. The validity of the scheme is confirmed by simulating the buoyancy-driven motion of a Taylor bubble through a stagnant Newtonian liquid in a vertical pipe characterised by dimensionless inverse viscosity number and Eötvös number of magnitude 111 and 189, respectively. Comparison of the numerical results for the steady state features defining the nose, film, and bottom regions around the bubble with the experiment shows a good agreement between the numerical simulation and the experiment. The percentage deviation of the numerical computed rise velocity, equilibrium film thickness, and stabilisation length ahead of the bubble from the experimental determined values are 8.4%, 2.3%, and 9.5%, respectively.

Finite element simulation of three-dimensional free-surface flow problems with dynamic contact lines

2005 ◽  
Vol 47 (10-11) ◽  
pp. 1353-1359 ◽  
Author(s):  
M. A. Walkley ◽  
P. H. Gaskell ◽  
P. K. Jimack ◽  
M. A. Kelmanson ◽  
J. L. Summers
Keyword(s):  
Finite Element ◽  
Free Surface ◽  
Finite Element Simulation ◽  
Three Dimensional ◽  
Free Surface Flow ◽  
Dynamic Contact ◽  
Surface Flow ◽  
Contact Lines ◽  
Flow Problems ◽  
Element Simulation
Sign in / Sign up

Export Citation Format

Share Document