Modeling a robust wind-speed forecasting to apply to wind-energy production

2018 ◽  
Vol 31 (11) ◽  
pp. 7891-7905
Author(s):  
José Gustavo Hernández-Travieso ◽  
Carlos M. Travieso-González ◽  
Jesús B. Alonso-Hernández ◽  
José Miguel Canino-Rodríguez ◽  
Antonio G. Ravelo-García
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Energy Production ◽  
Wind Speed Forecasting

scholarly journals Lidar arc scan uncertainty reduction through scanning geometry optimization

2016 ◽  
Vol 9 (4) ◽  
pp. 1653-1669 ◽  
Author(s):  
Hui Wang ◽  
Rebecca J. Barthelmie ◽  
Sara C. Pryor ◽  
Gareth. Brown
Keyword(s):  
Theoretical Model ◽  
Wind Speed ◽  
Wind Energy ◽  
Turbulence Intensity ◽  
Wind Direction ◽  
Energy Production ◽  
Elevation Angle ◽  
Relative Standard Error ◽  
Power Performance ◽  
Relative Standard

Abstract. Doppler lidars are frequently operated in a mode referred to as arc scans, wherein the lidar beam scans across a sector with a fixed elevation angle and the resulting measurements are used to derive an estimate of the n minute horizontal mean wind velocity (speed and direction). Previous studies have shown that the uncertainty in the measured wind speed originates from turbulent wind fluctuations and depends on the scan geometry (the arc span and the arc orientation). This paper is designed to provide guidance on optimal scan geometries for two key applications in the wind energy industry: wind turbine power performance analysis and annual energy production prediction. We present a quantitative analysis of the retrieved wind speed uncertainty derived using a theoretical model with the assumption of isotropic and frozen turbulence, and observations from three sites that are onshore with flat terrain, onshore with complex terrain and offshore, respectively. The results from both the theoretical model and observations show that the uncertainty is scaled with the turbulence intensity such that the relative standard error on the 10 min mean wind speed is about 30 % of the turbulence intensity. The uncertainty in both retrieved wind speeds and derived wind energy production estimates can be reduced by aligning lidar beams with the dominant wind direction, increasing the arc span and lowering the number of beams per arc scan. Large arc spans should be used at sites with high turbulence intensity and/or large wind direction variation.

Wind resource assessment and wind farm modeling in Mossobo-Harena area, North Ethiopia

2020 ◽  
pp. 0309524X2092540
Author(s):  
Addisu Dagne Zegeye
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Power Density ◽  
Energy Production ◽  
Wind Farm ◽  
Ground Level ◽  
Energy Potential ◽  
Mean Power ◽  
Wind Energy Potential

Although Ethiopia does not have significant fossil fuel resource, it is endowed with a huge amount of renewable energy resources such as hydro, wind, geothermal, and solar power. However, only a small portion of these resources has been utilized so far and less than 30% of the nation’s population has access to electricity. The wind energy potential of the country is estimated to be up to 10 GW. Yet less than 5% of this potential is developed so far. One of the reasons for this low utilization of wind energy in Ethiopia is the absence of a reliable and accurate wind atlas and resource maps. Development of reliable and accurate wind atlas and resource maps helps to identify candidate sites for wind energy applications and facilitates the planning and implementation of wind energy projects. The main purpose of this research is to assess the wind energy potential and model wind farm in the Mossobo-Harena site of North Ethiopia. In this research, wind data collected for 2 years from Mossobo-Harena site meteorological station were analyzed using different statistical software to evaluate the wind energy potential of the area. Average wind speed and power density, distribution of the wind, prevailing direction, turbulence intensity, and wind shear profile of the site were determined. Wind Atlas Analysis and Application Program was used to generate the generalized wind climate of the area and develop resource maps. Wind farm layout and preliminary turbine micro-sitting were done by taking various factors into consideration. The IEC wind turbine class of the site was determined and an appropriate wind turbine for the study area wind climate was selected and the net annual energy production and capacity factor of the wind farm were determined. The measured data analysis conducted indicates that the mean wind speed at 10 and 40 m above the ground level is 5.12 and 6.41 m/s, respectively, at measuring site. The measuring site’s mean power density was determined to be 138.55 and 276.52 W/m2 at 10 and 40 m above the ground level, respectively. The prevailing wind direction in the site is from east to south east where about 60% of the wind was recorded. The resource grid maps developed by Wind Atlas Analysis and Application Program on a 10 km × 10 km area at 50 m above the ground level indicate that the selected study area has a mean wind speed of 5.58 m/s and a mean power density of 146 W/m2. The average turbulence intensity of the site was found to be 0.136 at 40 m which indicates that the site has a moderate turbulence level. According to the resource assessment done, the area is classified as a wind Class IIIB site. A 2-MW rated power ENERCON E-82 E2 wind turbine which is an IEC Class IIB turbine with 82 m rotor diameter and 98 m hub height was selected for estimation of annual energy production on the proposed wind farm. 88 ENERCON E-82 E2 wind turbines were properly sited in the wind farm with recommended spacing between the turbines so as to reduce the wake loss. The rated power of the wind farm is 180.4 MW and the net annual energy production and capacity factor of the proposed wind farm were determined to be 434.315 GWh and 27.48% after considering various losses in the wind farm.

Short Term Wind Speed Forecasting Based on Bayesian Model Averaging Method

2009 ◽  
Author(s):  
Gong Li ◽  
Jing Shi ◽  
Junyi Zhou
Keyword(s):  
Wind Speed ◽  
Power System ◽  
Wind Energy ◽  
Statistical Models ◽  
Bayesian Model ◽  
Bayesian Model Averaging ◽  
Model Averaging ◽  
Short Term ◽  
Goodness Of Fit Test ◽  
Wind Speed Forecasting

Wind energy has been the world’s fastest growing source of clean and renewable energy in the past decade. One of the fundamental difficulties faced by power system operators, however, is the unpredictability and variability of wind power generation, which is closely connected with the continuous fluctuations of the wind resource. Good short-term wind speed forecasting methods and techniques are urgently needed since it is important for wind energy conversion systems in terms of the relevant issues associated with the dynamic control of the wind turbine and the integration of wind energy into the power system. This paper proposes the application of Bayesian Model Averaging (BMA) method in combining the one-hour-ahead short-term wind speed forecasts from different statistical models. Based on the hourly wind speed observations from one representative site within North Dakota, four statistical models are built and the corresponding forecast time series are obtained. These data are then analyzed by using BMA method. The goodness-of-fit test results show that the BMA method is superior to its component models by providing a more reliable and accurate description of the total predictive uncertainty than the original elements, leading to a sharper probability density function for the probabilistic wind speed predictions.

scholarly journals Wake and Turbulence Analysis for Wind Turbine Layouts in an Island

2018 ◽  
Vol 64 ◽  
pp. 06010
Author(s):  
Bachhal Amrender Singh ◽  
Vogstad Klaus ◽  
Lal Kolhe Mohan ◽  
Chougule Abhijit ◽  
Beyer Hans George
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Wind Farm ◽  
Full Length Paper ◽  
Turbulence Analysis ◽  
Wake Model ◽  
Wind Resources

There is a big wind energy potential in supplying the power in an island and most of the islands are off-grid. Due to the limited area in island(s), there is need to find appropriate layout / location for wind turbines suited to the local wind conditions. In this paper, we have considered the wind resources data of an island in Trøndelag region of the Northern Norway, situated on the coastal line. The wind resources data of this island have been analysed for wake losses and turbulence on wind turbines for determining appropriate locations of wind turbines in this island. These analyses are very important for understanding the fatigue and mechanical stress on the wind turbines. In this work, semi empirical wake model has been used for wake losses analysis with wind speed and turbine spacings. The Jensen wake model used for the wake loss analysis due to its high degree of accuracy and the Frandsen model for characterizing the turbulent loading. The variations of the losses in the wind energy production of the down-wind turbine relative to the up-wind turbine and, the down-stream turbulence have been analysed for various turbine distances. The special emphasis has been taken for the case of wind turbine spacing, leading to the turbulence conditions for satisfying the IEC 61400-1 conditions to find the wind turbine layout in this island. The energy production of down-wind turbines has been decreased from 2 to 20% due to the lower wind speeds as they are located behind up-wind turbine, resulting in decreasing the overall energy production of the wind farm. Also, the higher wake losses have contributed to the effective turbulence, which has reduced the overall energy production from the wind farm. In this case study, the required distance for wind turbines have been changed to 6 rotor diameters for increasing the energy gain. From the results, it has been estimated that the marginal change in wake losses by moving the down-stream wind turbine by one rotor diameter distance has been in the range of 0.5 to 1% only and it is insignificant. In the full-length paper, the wake effects with wind speed variations and the wind turbine locations will be reported for reducing the wake losses on the down-stream wind turbine. The Frandsen model has been used for analysing turbulence loading on the down-stream wind turbine as per IEC 61400-1 criteria. In larger wind farms, the high turbulence from the up-stream wind turbines increases the fatigues on the turbines of the wind farm. In this work, we have used the effective turbulence criteria at a certain distance between up-stream and down-stream turbines for minimizing the fatigue load level. The sensitivity analysis on wake and turbulence analysis will be reported in the full-length paper. Results from this work will be useful for finding wind farm layouts in an island for utilizing effectively the wind energy resources and electrification using wind power plants.

scholarly journals Wind potential estimation and proposed energy production in Southern Punjab using Weibull probability density function and surface measured data

2020 ◽  
pp. 014459872092074 ◽  
Author(s):  
Muhammad Sumair ◽  
Tauseef Aized ◽  
Syed Asad Raza Gardezi ◽  
Syed Ubaid Ur Rehman ◽  
Syed Muhammad Sohail Rehman
Keyword(s):  
Wind Speed ◽  
Energy Density ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Energy Production ◽  
Economic Assessment ◽  
Weibull Model ◽  
Wind Power Density ◽  
Wind Potential

Current work focusses on the wind potential assessment in South Punjab. Eleven locations from South Punjab have been analyzed using two-parameter Weibull model (with Energy Pattern Factor Method to estimate Weibull parameters) and five years (2014–2018) hourly wind data measured at 50 m height and collected from Pakistan Meteorological Department. Techno-economic analysis of energy production using six different turbine models was carried out with the purpose of presenting a clear picture about the importance of turbine selection at particular location. The analysis showed that Rahim Yar Khan carries the highest wind speed, highest wind power density, and wind energy density with values 4.40 ms−1, 77.2 W/m2 and 677.76 kWh/m2/year, respectively. On the other extreme, Bahawalnagar observes the least wind speed i.e. 3.60 ms−1 while Layyah observes the minimum wind power density and wind energy density as 38.96 W/m2 and 352.24 kWh/m2/year, respectively. According to National Renewable Energy Laboratory standards, wind potential ranging from 0 to 200 W/m2 is considered poor. Economic assessment was carried out to find feasibility of the location for energy harvesting. Finally, Polar diagrams drawn to show the optimum wind blowing directions shows that optimum wind direction in the region is southwest.

A case study of climate variability effects on wind resources in South Africa

2014 ◽  
Vol 25 (3) ◽  
pp. 2-10 ◽  
Author(s):  
Lynette Herbst ◽  
Jörg Lalk
Keyword(s):  
Climate Change ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Energy Production ◽  
Energy Sector ◽  
Speed Increase ◽  
Wind Resources ◽  
Wind Speed Increase

The wind energy sector is one of the most prominent sectors of the renewable energy industry. However, its dependence on meteorological factors subjects it to climate change. Studies analysing the impact of climate change on wind resources usually only model changes in wind speed. Two elements that have to be calculated in addition to wind speed changes are Annual Energy Production (AEP) and Power Density (PD). This is not only because of the inherent variability between wind speed and wind power generated, but also because of the relative magnitudes of change in energy potentially generated at different areas under varied wind climates. In this study, it was assumed that two separate locations would experience a 10% wind speed increase after McInnes et al. (2010). Given the two locations’ different wind speed distributions, a wind speed increase equal in magnitude is not equivalent to similar magnitudes of change in potential energy production in these areas. This paper demonstrates this fact for each of the case studies. It is of general interest to the energy field and is of value since very little literature exists in the Southern African context on climate change- or variability-effects on the (wind) energy sector. Energy output is therefore dependent not only on wind speed, but also wind turbine characteristics. The importance of including wind power curves and wind turbine generator capacity in wind resource analysis is emphasised.

scholarly journals The Forecasting Procedure for Long-Term Wind Speed in the Zhangye Area

2010 ◽  
Vol 2010 ◽  
pp. 1-17 ◽  
Author(s):  
Zhenhai Guo ◽  
Yao Dong ◽  
Jianzhou Wang ◽  
Haiyan Lu
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Alternative Energy ◽  
Energy System ◽  
Support Vector ◽  
Ancillary Service ◽  
Average Wind Speed ◽  
Index Method ◽  
Wind Speed Forecasting

Energy crisis has made it urgent to find alternative energy sources for sustainable energy supply; wind energy is one of the attractive alternatives. Within a wind energy system, the wind speed is one key parameter; accurately forecasting of wind speed can minimize the scheduling errors and in turn increase the reliability of the electric power grid and reduce the power market ancillary service costs. This paper proposes a new hybrid model for long-term wind speed forecasting based on the first definite season index method and the Autoregressive Moving Average (ARMA) models or the Generalized Autoregressive Conditional Heteroskedasticity (GARCH) forecasting models. The forecasting errors are analyzed and compared with the ones obtained from the ARMA, GARCH model, and Support Vector Machine (SVM); the simulation process and results show that the developed method is simple and quite efficient for daily average wind speed forecasting of Hexi Corridor in China.

Sign in / Sign up

Export Citation Format

Share Document