Five-year clinical performance of a HEMA-free one-step self-etch adhesive in noncarious cervical lesions

Author(s):  
Kirsten L. Van Landuyt ◽  
Jan De Munck ◽  
R. Banu Ermis ◽  
Marleen Peumans ◽  
Bart Van Meerbeek
2013 ◽  
Vol 1 (1) ◽  
pp. 28
Author(s):  
Neimar Sartori ◽  
Renan Belli ◽  
Jackeline Coutinho Guimarães ◽  
Silvana Batalha ◽  
Sylvio Monteiro Jr ◽  
...  

PURPOSE: The purpose of this randomized controlled clinical trial was to evaluate the clinical performance of a one-step self-etch adhesive system in non-carious cervical lesions with and without the application of an additional hydrophobic resin coat. MATERIALS AND METHODS: Sixty-four non-carious cervical lesions were selected and randomly assigned to one of the two bonding technique: 1) a one-step self-etch adhesive (Adper Easy Bond, 3M ESPE) was applied following manufacturer´s instructions; 2) a hydrophobic resin coat (Scotchbond Multipurpose Bonding Agent, 3M ESPE) was applied over the uncured Adper Easy Bond adhesive. All lessons were restored using a microhybrid composite resin (Filtek Z250, 3M ESPE). Clinical effectiveness was recorded at baseline and after 6-months of clinical service. RESULTS: Two restorations of each group debonded after a 6-months period. The overall clinical success was 93.8%, and no statistical significant differences could be detected for all evaluated criteria within this period. CONCLUSION: The applications of a hydrophobic resin coat over Easy Bond did not increase bonding effectiveness over a 6-months period.


2013 ◽  
Vol 38 (2) ◽  
pp. 134-141 ◽  
Author(s):  
H Moosavi ◽  
S Kimyai ◽  
M Forghani ◽  
R Khodadadi

SUMMARY The aim of this clinical trial was to compare the clinical performance of three different adhesive systems over 18 months in noncarious cervical lesions (NCCLs). Thirty patients, with at least three noncarious cervical lesions, were enrolled in the study. One operator randomly restored a total of 90 lesions with resin composite (Herculite XRV). The restorations were bonded with either Optibond FL (OF), three-step total-etch; Optibond Solo Plus (OS), two-step total-etch; or Optibond All-In-One (OA), one step self-etch. The restorations were clinically evaluated at baseline and after six, 12, and 18 months using the eight United States Public Health Services criteria. Data were analyzed using Friedman and Wilcoxon signed ranks tests (p<0.05). After 18 months, the retention rate was (OF) 96.5%, (OS) 93.1%, and (OA) 89.7%. Differences among the three adhesive systems for evaluated criteria were not observed in comparison of the mean Alfa score percentages. There was a significant increase in marginal discoloration for (OA) adhesive after 18 months compared with baseline (p=0.011). Other restoration criteria had no statistically significant differences among the three adhesives (p>0.05). With the exception of marginal discoloration, the clinical effectiveness of three types of adhesive systems in NCCLs was acceptable after 18 months. However, using the one-step self-etch adhesive may lead to some marginal discolorations.


2014 ◽  
Vol 39 (3) ◽  
pp. 228-238 ◽  
Author(s):  
C Zander-Grande ◽  
R C Amaral ◽  
AD Loguercio ◽  
LP Barroso ◽  
A Reis

SUMMARY Objectives To evaluate the clinical performance of two one-step self-etch adhesives in noncarious cervical lesions (NCCL) under active or passive application mode. Methods Thirty-one patients with four NCCL were enrolled in this study. One hundred and twenty-four restorations were placed according to one of the following conditions: 1) Adper Prompt L-Pop (AP), active application (APA); 2) AP, passive application (APP); 3) Xeno III (XE), active application (XEA), or 4) XE, passive application (XEP). The restorations were evaluated by the FDI World Dental Federation criteria at baseline and after six, 12, and 24 months of clinical service. The effects of adhesive, mode of application, and recall period were assessed via mixed generalized linear model (α=0.05). Results The adhesive AP and the passive application mode showed significantly higher marginal staining than did XE and active application, respectively (p<0.05). With regard to the retention rates, the active application mode yielded higher retention rates at the 24-month recall compared to the passive application, regardless of the material. The individual retention rates (95% confidence interval) of both adhesives in the active application mode were the same, 96.8% (83.8-99.4%), while in the passive application rates were 87.1% (71.2-94.9%) and 80.7% (63.7-90.8%) for XE and AP, respectively. Conclusions The active application improved the retention rates of both adhesives after 24 months and minimized the marginal staining at enamel margins.


2011 ◽  
Vol 119 (6) ◽  
pp. 511-516 ◽  
Author(s):  
Kirsten L. Van Landuyt ◽  
Marleen Peumans ◽  
Jan De Munck ◽  
Marcio V. Cardoso ◽  
Banu Ermis ◽  
...  

2013 ◽  
Vol 38 (3) ◽  
pp. 249-257 ◽  
Author(s):  
N Sartori ◽  
LD Peruchi ◽  
JC Guimarães ◽  
SB Silva ◽  
S Monteiro ◽  
...  

SUMMARY The purpose of this randomized clinical trial was to evaluate the clinical performance of a one-step self-etch adhesive in noncarious cervical lesions with inclusion of a hydrophobic bonding layer not included in the original bonding system as a test of potentially improved bonding. Patients with noncarious cervical lesions received two or four restorations after being randomly assigned to two adhesive technique protocols (n=32): EB, application of Adper Easy Bond (3M ESPE) following manufacturer's instructions; and EB+B, application of Adper Easy Bond, immediately followed by the application of a hydrophobic resin coat (Scotchbond Multi-Purpose Bonding Agent, 3M ESPE). All restorations were restored with a microhybrid composite (Filtek Z250, 3M ESPE). Clinical effectiveness was recorded in terms of retention, marginal discoloration, marginal integrity, postoperative sensitivity, recurrent caries, periodontal health, and pulpal vitality, according to the modified USPHS criteria, for 18 months. Data were analyzed using chi-square, Fisher exact, and McNemar tests at α=0.05. Two restorations of each group were debonded after six months, leading to an overall clinical success rate of 93.8% for both groups. At the 18-month evaluation period, no new restoration was debonded. However, one restoration of the EB group displayed recurrent caries at the dentin margin, decreasing the overall success rate to 90.6% in comparison to 93.8% of EB+B. The success rate between EB and EB+B was not statistically significant (p=0.5). The application of a hydrophobic resin coat over EB did not increase bonding effectiveness in noncarious cervical lesions after 18 months.


2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Babacar Faye ◽  
Mouhamed Sarr ◽  
Khaly Bane ◽  
Adjaratou Wakha Aidara ◽  
Seydina Ousmane Niang ◽  
...  

This study evaluated the one-year clinical performance of a one-step, self-etch adhesive (Optibond All-in-One, Kerr, CA, USA) combined with a composite (Herculite XRV Ultra, Kerr Hawe, CA, USA) to restore NCCLs with or without prior acid etching. Restorations performed by the same practitioner were evaluated at baseline and after 3, 6, and 12 months using modified USPHS criteria. At 6 months, the recall rate was 100%. The retention rate was 84.2% for restorations with prior acid etching, but statistically significant differences were observed between baseline and 6 months. Without acid etching, the retention rate was 77%, and no statistically significant difference was noted between 3 and 6 months. Marginal integrity (93.7% with and 87.7% without acid etching) and discoloration (95.3% with and 92.9% without acid etching) were scored as Alpha or Bravo, with better results after acid etching. After one year, the recall rate was 58.06%. Loss of pulp vitality, postoperative sensitivity, or secondary caries were not observed. After one year retention rate was of 90.6% and 76.9% with and without acid conditioning. Optibond All-in-One performs at a satisfactory clinical performance level for restoration of NCCLs after 12 months especially after acid etching.


2013 ◽  
Vol 38 (5) ◽  
pp. 477-487 ◽  
Author(s):  
JO Burgess ◽  
R Sadid-Zadeh ◽  
D Cakir ◽  
LC Ramp

SUMMARY Objective: The purpose of this study was to compare the clinical performance of two self-etch dental adhesives with Single Bond Plus, a traditional one-bottle total-etch dental adhesive, for the restoration of noncarious cervical lesions. Materials and Methods: A total of 156 restorations were placed in noncarious cervical lesions with a minimum depth of 1.5 mm. Patients had no chronic periodontal disease and had normal salivary function. Each patient received restorations on three teeth, each bonded with either Adper Single Bond Plus, Adper Easy Bond, or Adper Scotchbond SE dental adhesive. All lesions were restored with Filtek Supreme Plus composite resin. All teeth were isolated with a rubber dam, received a short enamel bevel, and were cleaned with flour of pumice. The adhesives and resin composite were applied following the manufacturers' instructions. Restorations were clinically evaluated at baseline, six months, one year, and two years using modified US Public Health Service criteria. Results: Two-year retention was recorded as 97.3%, 90.5%, and 95.2%, for Single Bond Plus, Scotchbond SE, and Easy Bond, respectively. Statistical analysis did not show a significant difference (p>0.05) in clinical performance between any of the three adhesives after a period of two years.


2020 ◽  
Vol 45 (5) ◽  
pp. E255-E270
Author(s):  
E Gomes de Albuquerque ◽  
F Warol ◽  
F Signorelli Calazans ◽  
L Augusto Poubel ◽  
S Soares Marins ◽  
...  

Clinical Relevance Non-carious cervical lesion restorations using a dual-cure universal adhesive in self-etch and etch-and-rinse mode showed satisfactory clinical performance after 18 months. SUMMARY Objectives: The objective of this multicenter, double-blind, split-mouth randomized clinical trial was to evaluate the clinical performance of a new dual-cure universal adhesive system (Futurabond U, Voco GmBH) when applied using different strategies over a period of 18 months. Methods and Materials: Fifty patients participated in this study. Two hundred non-carious cervical lesions were restored using the adhesive Futurabond U according to four adhesive strategies (n=50 per group): only self-etch (SEE), selective enamel etching + self-etch (SET), etch-and-rinse with dry dentin (ERDry), and etch-and-rinse with wet dentin (ERWet). After the adhesive application, cavities were restored using Admira Fusion composite resin. These restorations were evaluated according to FDI World Dental Federation criteria for the following characteristics: retention/fracture, marginal adaptation, marginal staining, postoperative sensitivity, and caries recurrence. Results: After 18 months, only four patients (12 months: one patient, n=4 restorations; and 18 months: three patients, n=12 restorations) were not evaluated. Fourteen restorations were lost after 18 months of clinical evaluation (four for SEE, three for SET, three for ERDry, and four for ERWet). The retention rates for 18 months (95% confidence interval) were 92% (81%–97%) for SEE, 94% (83%–97%) for SET, 94% (83%–97%) for ERDry, and 92% (81%–97%) for ERWet (p>0.05). Thirty-eight restorations were considered to have minor discrepancies in marginal adaptation at the 18-month recall (13 for SEE, 13 for SET, six for ERDry, and six for ERWet; p>0.05). Fourteen restorations were detected as a minor marginal discoloration at the 18-month recall (six for SEE, six for SET, one for ERDry, and one for ERWet; p>0.05). However, all were considered clinically acceptable. No restorations showed postoperative sensitivity or caries recurrence at the time. Conclusion: The clinical performance of the Futurabond U did not depend on the bonding strategy used, and it was considered reliable after 18 months of clinical evaluation, although more marginal discrepancy was observed in the self-etch group.


2011 ◽  
Vol 16 (3) ◽  
pp. 889-897 ◽  
Author(s):  
R. Banu Ermis ◽  
Kirsten L. Van Landuyt ◽  
Marcio Vivan Cardoso ◽  
Jan De Munck ◽  
Bart Van Meerbeek ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document