Preparation of a Sulfonated Porous Carbon Catalyst with High Specific Surface Area

2009 ◽  
Vol 131 (1-2) ◽  
pp. 242-249 ◽  
Author(s):  
Masaaki Kitano ◽  
Keisuke Arai ◽  
Atsushi Kodama ◽  
Tsutomu Kousaka ◽  
Kiyotaka Nakajima ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
High Specific Surface Area ◽  
Carbon Catalyst

KCl-assisted activation: Moringa oleifera branch-derived porous carbon for high performance supercapacitor

2021 ◽  
Vol 45 (12) ◽  
pp. 5712-5719
Author(s):  
Yongxiang Zhang ◽  
Peifeng Yu ◽  
Mingtao Zheng ◽  
Yong Xiao ◽  
Hang Hu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
High Performance ◽  
Moringa Oleifera ◽  
High Specific Surface Area ◽  
Porous Carbons

Porous carbons with a high specific surface area (2314–3470 m2 g−1) are prepared via a novel KCl-assisted activation strategy for high-performance supercapacitor.

Fabrication of an N-doped mesoporous bio-carbon electrocatalyst efficient in Zn–air batteries by an in situ gas-foaming strategy

2019 ◽  
Vol 55 (100) ◽  
pp. 15117-15120 ◽  
Author(s):  
Hong Wang ◽  
Wei Li ◽  
Zhiwei Zhu ◽  
Yijuan Wang ◽  
Pan Li ◽  
...  
Keyword(s):  
Specific Surface ◽  
Porous Structure ◽  
Surface Area ◽  
Specific Surface Area ◽  
Electrocatalytic Activity ◽  
High Specific Surface Area ◽  
Carbon Catalyst ◽  
Gas Foaming

An N-doped bio-carbon catalyst with a hierarchical interconnected macro/meso-porous structure and high specific surface area exhibited significantly enhanced electrocatalytic activity.

scholarly journals A Type of MOF-Derived Porous Carbon with Low Cost as an Efficient Catalyst for Phenol Hydroxylation

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Renjie Zhou ◽  
Gui Chen ◽  
Yuejun Ouyang ◽  
Hairui Ni ◽  
Nonglin Zhou ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
Physical Adsorption ◽  
Low Cost ◽  
High Specific Surface Area ◽  
Phenol Hydroxylation ◽  
Efficient Catalyst

Using MOF-5 as a template, the porous carbon (MDPC-600) possessing high specific surface area was obtained after carbonization and acid washing. After MDPC-600 was loaded with Cu ions, the catalyst Cu/MDPC-600 was acquired by heat treatment under nitrogen atmosphere. The catalyst was characterized by X-ray powder diffraction (XRD), N2 physical adsorption (BET), field emission electron microscope (SEM), energy spectrum, and transmission electron microscope (TEM). The results show that the Cu/MDPC-600 catalyst prepared by using MOF-5 as the template has a very high specific surface area, and Cu is uniformly supported on the carrier. The catalytic hydrogen peroxide oxidation reaction of phenol hydroxylation was investigated and exhibits better catalytic activity and stability in the phenol hydroxylation reaction. The catalytic effect was best when the reaction temperature was 80°C, the reaction time was 2 h, and the amount of catalyst was 0.05 g. The conversion rate of phenol was 47.6%; the yield and selectivity of catechol were 37.8% and 79.4%, respectively. The activity of the catalyst changes little after three cycles of use.

scholarly journals Nitrogen and oxygen Co-doped porous carbon derived from yam waste for high-performance supercapacitors

RSC Advances ◽  
2021 ◽  
Vol 11 (53) ◽  
pp. 33208-33218
Author(s):  
Zhaojin Li ◽  
Qian Liu ◽  
Lizhi Sun ◽  
Ning Li ◽  
Xiaofeng Wang ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
High Performance ◽  
High Specific Surface Area ◽  
Raw Material ◽  
Excellent Electrochemical Performance ◽  
Co Doped

3D porous carbon with ultra-high specific surface area and excellent electrochemical performance is synthesized by a simple activation and carbonization process through adopting biomass yam waste as raw material.

scholarly journals Porous Carrageenan-Derived Carbons for Efficient Ciprofloxacin Removal from Water

Nanomaterials ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 1004 ◽  
Author(s):  
João Nogueira ◽  
Maria António ◽  
Sergey Mikhalev ◽  
Sara Fateixa ◽  
Tito Trindade ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Porous Carbon ◽  
Carbon Materials ◽  
Activated Carbons ◽  
Chemical Activation ◽  
High Specific Surface Area ◽  
High Porosity ◽  
Porous Carbon Materials

Porous carbon materials derived from biopolymers are attractive sorbents for the removal of emerging pollutants from water, due to their high specific surface area, high porosity, tunable surface chemistry, and reasonable cost. However, carrageenan biopolymers were scarcely investigated as a carbon source to prepare porous carbon materials. Herein, hydrochars (HCs) and porous activated carbons (ACs) derived from natural occurring polysaccharides with variable sulfate content (κ-, ι- and λ-carrageenan) were prepared and investigated in the uptake of ciprofloxacin, which is an antibiotic detected in water sources and that poses serious hazards to public health. The materials were prepared using hydrothermal carbonization and subsequent chemical activation with KOH to increase the available surface area. The activated carbons were markedly microporous, presenting high specific surface area, up to 2800 m2/g. Activated carbons derived from κ- and λ-carrageenan showed high adsorption capacity (422 and 459 mg/g, respectively) for ciprofloxacin and fast adsorption kinetics, reaching the sorption equilibrium in approximately 5 min. These features place the ACs investigated here among the best systems reported in the literature for the removal of ciprofloxacin from water.

Sign in / Sign up

Export Citation Format

Share Document