Structural-Fractographic Features of Structural Steels After Long-Term Operation

2022 ◽  
Author(s):  
H. V. Krechkovska
Author(s):  
V.I. Gromov ◽  
◽  
N.A. Yakusheva ◽  
A.V. Vostrikov ◽  
N.N. Cherkashneva ◽  
...  

The motor shaft of a gas turbine engine, being a highly loaded part of a particularly critical purpose, has increased requirements for maintaining the level of properties during long-term operation, ensuring the structural strength of the product. An increase in the resource and durability of the product is achieved due to the development of new materials that surpass the used domestic and foreign analogues in their mechanical characteristics. FSUE «VIAM» has deve-loped high-strength structural steels with enhanced characteristics of strength, toughness, durability and heat resistance.


2020 ◽  
Vol 164 ◽  
pp. 08023
Author(s):  
Valeriy Gordienko

The analysis and consideration of the influence of the main factors on the damage of welded metal structures during long-term operation. The relationship between the strength of the magnetic field of the Hр scattering and structural changes in structural steels that occur during cold plastic deformation to different degrees is established. It is shown that at small degrees of deformation, the change in the magnetic parameter Hр is large. As they increase, the HP value decreases and tends to the values of the Earth's magnetic field. The data of microstructural analysis of the metal of structural steels are in good agreement with the results of the passive ferrosonde method of control. A method for evaluating the effect of cold plastic deformation on the magnetic properties of metal in structural steels has been developed.


2017 ◽  
Vol 1 (21) ◽  
pp. 65-73
Author(s):  
Monika Gwoździk

The paper presents results of studies on the crystallite sizes of oxide layer formed during a long-term operation on 10CrMo9-10 steel at an elevated temperature (T = 545° C, t = 200,000 h). This value was determined by a method based on analysis of the diffraction line profile, according to a Scherrer formula. The oxide layer was studied on a surface and a cross-section at the outer and inner site on the pipe outlet, at the fire and counter-fire wall of the tube. X-ray studies were carried out on the surface of a tube, then the layer’s surface was polished and the diffraction measurements repeated to reveal differences in the originated oxides layer.


1997 ◽  
Vol 36 (10) ◽  
pp. 1-8 ◽  
Author(s):  
James D. Bryers ◽  
Robert R. Sharp

Exposure of plasmid recombinant microorganisms to an open environment, either inadvertently or intentionally, requires research into those fundamental processes that govern plasmid retention, transfer and expression. In the open environment, a majority of the microbial activity occurs associated with an interface, within thin biological layers consisting of cells and their insoluble extracellular polymer, layers known as biofilms. Current toxic wastewater or wastegas treatment reactors exploit bacterial biofilm systems for certain system operating advantages. Using recombinant bacteria within a biofilm reactor to degrade xenobiotic wastes requires finding a suitable host to harbor and express the desired plasmid phenotype. Suitable host characteristics include: the ability to produce copious amounts of biofilm, resistance to waste-related injury and toxicity, and the ability to retain and express the desired plasmid during long term operation. This paper reports on a laboratory evaluation of factors governing plasmid retention and the expression of trichloroethene (TCE) degradative capacity in both suspended and biofilm cultures.


Sign in / Sign up

Export Citation Format

Share Document