The effect of functionalization on structure and electrical conductivity of multi-walled carbon nanotubes

2008 ◽  
Vol 10 (S1) ◽  
pp. 77-88 ◽  
Author(s):  
Cher Hon Lau ◽  
Raoul Cervini ◽  
Stephen R. Clarke ◽  
Milena Ginic Markovic ◽  
Janis G. Matisons ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

scholarly journals Enhancement of Electrical Conductivity of Aluminum-Based Nanocomposite Produced by Spark Plasma Sintering

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1150
Author(s):  
Nicolás A. Ulloa-Castillo ◽  
Roberto Hernández-Maya ◽  
Jorge Islas-Urbano ◽  
Oscar Martínez-Romero ◽  
Emmanuel Segura-Cárdenas ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Spark Plasma Sintering ◽  
Experimental Tests ◽  
Powder Morphology ◽  
Plasma Sintering ◽  
Multi Walled Carbon Nanotubes ◽  
Spark Plasma ◽  
Ball Milling Technique ◽  
Walled Carbon Nanotubes

This article focuses on exploring how the electrical conductivity and densification properties of metallic samples made from aluminum (Al) powders reinforced with 0.5 wt % concentration of multi-walled carbon nanotubes (MWCNTs) and consolidated through spark plasma sintering (SPS) process are affected by the carbon nanotubes dispersion and the Al particles morphology. Experimental characterization tests performed by scanning electron microscopy (SEM) and by energy dispersive spectroscopy (EDS) show that the MWCNTs were uniformly ball-milled and dispersed in the Al surface particles, and undesirable phases were not observed in X-ray diffraction measurements. Furthermore, high densification parts and an improvement of about 40% in the electrical conductivity values were confirmed via experimental tests performed on the produced sintered samples. These results elucidate that modifying the powder morphology using the ball-milling technique to bond carbon nanotubes into the Al surface particles aids the ability to obtain highly dense parts with increasing electrical conductivity properties.

scholarly journals Synthesis, Characterization and Study of DC Electrical Conductivity of Poly[MWCNT/Imidoselenium] Composite

2019 ◽  
Author(s):  
Abeer O. Obeid ◽  
Fatma Al-Yusufy ◽  
Sama A Al-Aghbari ◽  
omar alshujaa ◽  
Yassin Gaber ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Selenium Dioxide ◽  
Chemical Functionalization ◽  
Dc Electrical Conductivity ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

<p>The chemical functionalization of amino multi-walled carbon nanotubes (MWCNT-NH<sub>2</sub>) by selenium dioxide (SeO<sub>2</sub>) was used to produce Poly [MWCNT/Imidoselenium] composite. The prepared poly-composite was characterized by FTIR, SEM, TEM, XRD, UV, DSC and TGA. The DC electrical conductivity of poly-composite was 4.3×10<sup>-4</sup> S/cm due to the interaction between the nanotubes. </p>

A Comparison of the Effect of Hydroxyl Modified Carbon Nanotubes and Graphenes on the Electrical and Mechanical Properties of Their Polyurethane Composites

2012 ◽  
Vol 622-623 ◽  
pp. 781-786
Author(s):  
Sarojini Swain ◽  
Subhendu Bhattacharya ◽  
Ram Avatar Sharma ◽  
Lokesh Chaudhari
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Filler Content ◽  
Graphene Nanosheets ◽  
Three Dimensional ◽  
Conduction System ◽  
Multi Walled Carbon Nanotubes ◽  
Electrical Conduction Mechanisms ◽  
Modified Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Hydroxyl modified multi-walled carbon nanotubes (OH-MWCNT)/ polyurethane (PU) and graphene nanosheets (GNS)/PU composites were prepared by dispersing the OH-MWCNT and GNS at different wt % in to the PU matrix. It was found that the electrical percolation threshold of the GNS/PU composite is much higher compared to that of OH-MWCNT/PU and also the electrical conductivity of the OH-MWCNT/PU composite is higher than the GNS/PU composite in the same level of filler content. This may be due to the two composites having different electrical conduction mechanisms: The OH-MWCNT/PU composite represents a three dimensional conduction system while, the GNS/PU composite represents a two dimensional conduction system. The improvement in the electrical conductivity with the incorporation of GNS as a filler in the composite is far lower than what theoretically expected. It is also observed that the tensile strength of the OH-MWCNT/PU composite is higher compared to the GNS/PU in the same level filler content.

scholarly journals Electrically Conductive Composite based on Functionalized Carbon Nanotubes/Epoxy Resin

2020 ◽  
Vol 9 (4) ◽  
pp. 1401-1404
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Epoxy Resin ◽  
Isopropyl Alcohol ◽  
Electrophysical Properties ◽  
Electrically Conductive ◽  
Functionalized Carbon Nanotubes ◽  
Multi Walled Carbon Nanotubes ◽  
Electrically Conductive Composite ◽  
Walled Carbon Nanotubes

This work is devoted to the study of the effect of carbon nanotubes functionalization on the electrical conductivity of composite materials based on them. Carbon nanotubes were functionalized by treatment in nitric acid and isopropyl alcohol. Changes in the morphology of multi-walled carbon nanotubes during liquid-phase functionalization were investigated using Auger-electron microscopy. Samples of composite material on the basis of initial and functionalized carbon nanotubes and epoxy resin were prepared and the concentration dependence of electrical conductivity using the four-probe method was studied. The study reveals the effect of functionalization in various solutions on the electrophysical properties of the obtained carbon nanotubes/epoxy composites.

scholarly journals Measurement and study of thermophysical properties of nanofluids with carbon nanotubes

2021 ◽  
Vol 2119 (1) ◽  
pp. 012117
Author(s):  
V Ya Rudyak ◽  
G R Dashapilov ◽  
A A Shupik
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Light Scattering ◽  
Dynamic Light Scattering ◽  
Thermophysical Properties ◽  
Weight Concentration ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Single Walled Cnts ◽  
Walled Cnts

Abstract This article is devoted to the study of the thermophysical properties of nanofluids with single-walled and multi-walled carbon nanotubes (CNT). Their weight concentration varied from 0.05 to 0.2%. Nanofluids, based on ethylene glycol and water, were studied. Dispersants were also used. The diffusion of CNT had been systematically investigated by the method of dynamic light scattering and their effective hydrodynamic dimensions were determined. The rheology and viscosity of all nanofluids were studied. It is shown that nanofluids are either pseu-doplastic or viscoplastic. Their rheology changes with increasing CNT concentration and temperature. However, in all cases, the viscosity of nanofluids with single-walled CNTs is signifi-cantly higher than that of nanofluids with multi-walled CNTs. In the last part, the electrical conductivity of all these nanofluids and the dispersants effect on it are investigated.

scholarly journals Improved electrical conductivity of poly(ethylene oxide) nanofibers using multi-walled carbon nanotubes

AIP Advances ◽  
2018 ◽  
Vol 8 (3) ◽  
pp. 035024 ◽  
Author(s):  
J. Y. Lee ◽  
T.-H. Kang ◽  
J. H. Choi ◽  
I.-S. Choi ◽  
W.-R. Yu
Keyword(s):  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Ethylene Oxide ◽  
Multi Walled Carbon Nanotubes ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Walled Carbon Nanotubes

Thermal Transport Properties of Ag-Based Nanocomposites Containing MWCNTs

2012 ◽  
Vol 1404 ◽  
Author(s):  
M. Inoue ◽  
Y. Hayashi ◽  
H. Takizawa
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Transport Properties ◽  
Electronic Contribution ◽  
Nanocomposite Powder ◽  
Multi Walled Carbon Nanotubes ◽  
Experimental Values ◽  
Walled Carbon Nanotubes ◽  
Percolation Network

ABSTRACTVariation in thermal conductivity of Ag-based composites by introduction of multi-walled carbon nanotubes (MWCNTs) was investigated. The Ag/MWCNT nanocomposite powder was successfully prepared when appropriate surfactants were used via a sonoprocess. The nanocomposite powder was subsequently cured at 280-300 ºC in air. After curing, the thermal conductivity of the nanocomposites was compared with the electronic contribution to thermal conductivity that was estimated from experimental values of the electrical conductivity. The thermal conductivity of Ag/MWCNT nanocomposites was much higher than the electronic contribution. Therefore, the increase in thermal conductivity of the Ag-based nanocomposites is attributed to phonon transfer along the percolation network of MWCNTs.

Sign in / Sign up

Export Citation Format

Share Document