scholarly journals Design and analysis of a class of redundant collaborative manipulators with 2D large rotational angles

2019 ◽  
Vol 15 (1) ◽  
pp. 66-80
Author(s):  
Xiaodong Jin ◽  
Yuefa Fang ◽  
Dan Zhang ◽  
Xueling Luo
Keyword(s):  
Machine Tools ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Rotational Axis ◽  
Revolute Joints ◽  
3D Printers ◽  
Rotational Degrees Of Freedom ◽  
Moving Platform ◽  
Orientation Workspace

AbstractThe parallel spindle heads with high rotational capability are demanded in the area of multi-axis machine tools and 3D printers. This paper focuses on designing a class of 2R1T (R: Rotation; T: Translation) parallel spindle heads and the corresponding collaborative 5-axis manipulators with 2-dimension (2D) large rotational angles. In order to construct 2D rotational degrees of freedom (DOFs), a platform with 2D revolute joints is proposed first. Based on the constraint screw theory, the feasible limbs that can be connected in the platform are synthesized. In order to provide constant rotational axis for the platform, a class of redundant limbs are designed. A class of redundant 2R1T parallel spindle heads is obtained by connecting the redundant limbs with the platform and the redundant characteristics are verified by the modified Grübler-Kutzbach criterion. The corresponding 5-axis collaborative manipulators are presented by constructing a 2-DOF series translational bottom moving platform. The inverse kinematics and the orientation workspace as well as the decoupling characteristics of this type of 2R1T parallel spindle heads are analyzed. The results show that these manipulators have large 2D rotational angles than the traditional A3/Z3 heads and can be potentially used in the application of multi-axis machine tools and the 3D printers.

Orientation Workspace Analysis of a Novel 3SPS+1PS Symmetrical Parallel Manipulator Based on Unit Quaternion

2011 ◽  
Vol 201-203 ◽  
pp. 1849-1853
Author(s):  
Jing Li Yu ◽  
Gang Cheng ◽  
Shuai Zhang ◽  
De Kun Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Unit Quaternion ◽  
Structure Characteristics ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Position And Orientation ◽  
4 Degrees Of Freedom ◽  
Orientation Workspace

For a novel 3SPS+1PS parallel manipulator with 4 degrees of freedom including three rotations and one translation, the formulae for solving the inverse kinematics equations are derived based on quaternion method. Unit quaternion is used to represent the position and orientation of moving platform, and the singularities caused by Euler angles are avoided. Combining the topological structure characteristics of the parallel manipulator, it only has three rotations when its moving platform is at a given translation position. Based on the inverse position/pose equations and the all the constraints of the parallel manipulator, the discrete algorithm for the orientation workspaces of 3SPS+1PS parallel manipulator where the moving platform is at some different given translation positions are designed. The research builds the theoretical basis for optimizing the orientation workspace with given position.

Structural synthesis of a class of 3-DOF wrist mechanisms with redundantly-actuated closed-loop units

2015 ◽  
Vol 230 (2) ◽  
pp. 276-290 ◽  
Author(s):  
Haibo Qu ◽  
Yuefa Fang ◽  
Sheng Guo
Keyword(s):  
Degrees Of Freedom ◽  
Closed Loop ◽  
Screw Theory ◽  
Open Loop ◽  
Structural Synthesis ◽  
Constraint System ◽  
Redundantly Actuated ◽  
Rotational Degrees Of Freedom ◽  
Moving Platform

In this paper, a new method is proposed for the structural synthesis of a class of redundantly-actuated parallel wrists (RaPWs) with three rotational degrees of freedom of the moving platform and symmetrical structures based on screw theory. First, the new procedure for structural synthesis of RaPWs with closed-loop actuated unit is proposed and the constraint system of the moving platform of RaPWs is analyzed. Then, considering the inclusion relation between the primary constraint system and the limb constraint system, the type of kinematic limb is determined. The synthesis of type-1 and type-2 kinematic limbs is dealt with based on the obtained closed-loop actuated unit and open-loop sub-limb. Next, the RaPWs are synthesized and a number of new RaPWs have been identified. Finally, the condition for proper actuator selections of RaPWs is revealed, and one example is used to perform the validation.

Dynamics of redundant robots – inverse solutions

Robotica ◽  
1986 ◽  
Vol 4 (4) ◽  
pp. 263-267 ◽  
Author(s):  
Ronald L. Huston ◽  
Timothy P. King
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Solution Algorithm ◽  
Redundant Robot ◽  
Redundant Robots ◽  
Revolute Joints ◽  
Inverse Kinematics Problem ◽  
Inverse Solutions ◽  
Natural Dynamics ◽  
Least Energy

SUMMARYThe dynamics of “simple, redundant robots” are developed. A “redundant” robot is a robot whose degrees of freedom are greater than those needed to perform a given kinetmatic task. A “simple” robot is a robot with all joints being revolute joints with axes perpendicular or parallel to the arm segments. A general formulation, and a solution algorithm, for the “inverse kinematics problem” for such systems, is presented. The solution is obtained using orthogonal complement arrays which in turn are obtained from a “zero-eigenvalues” algorithm. The paper concludes with an assertion that this solution, called the “natural dynamics solution,” is optimal in that it requires the least energy to drive the robot.

A Family of 3-DOF Translational Parallel Manipulators1

2003 ◽  
Vol 125 (2) ◽  
pp. 302-307 ◽  
Author(s):  
Marco Carricato ◽  
Vincenzo Parenti-Castelli
Keyword(s):  
Degrees Of Freedom ◽  
Translational Motion ◽  
Parallel Manipulators ◽  
Geometric Interpretation ◽  
The Other ◽  
Six Degrees Of Freedom ◽  
Revolute Joints ◽  
Rotational Degrees Of Freedom

This article addresses parallel manipulators with fewer than six degrees of freedom, whose use may prove valuable in those applications in which a higher mobility is uncalled for. In particular, a family of 3-dof manipulators containing only revolute joints or at the most revolute and prismatic ones is studied. Design and assembly conditions sufficient to provide the travelling platform with a pure translational motion are determined and two sub-families that fulfill the imposed constraint are found: one is already known in the literature, while the other is original. The new architecture does not exhibit rotation singularities, i.e., configurations in which the platform gains rotational degrees of freedom. A geometric interpretation of the translation singularities is provided.

Kinematics Analysis of a New 3-DOF Rotational Parallel Mechanism

2012 ◽  
Author(s):  
Ziming Chen ◽  
Wen-ao Cao ◽  
Zhen Huang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Mechanism ◽  
Kinematics Analysis ◽  
Revolute Joints ◽  
The Relationship ◽  
Orientation Workspace

In this paper a new rotational parallel mechanism which has three rotational freedoms is studied. This mechanism consists of only revolute joints. In this mechanism, no joints intersect with each other. The constraint and motion properties are analyzed. The inverse kinematics is solved and the orientation workspace is studied. In the end, the relationship between the orientation workspace and the link lengths is shown.

A 2(3-RRPS) parallel manipulator inspired by Gough–Stewart platform

Robotica ◽  
2012 ◽  
Vol 31 (3) ◽  
pp. 381-388 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Mario A. García-Murillo ◽  
Eduardo Castillo-Castaneda
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Triangular Prism ◽  
Input Output ◽  
Six Degrees Of Freedom ◽  
Moving Platform

SUMMARYThis study addresses the kinematics of a six-degrees-of-freedom parallel manipulator whose moving platform is a regular triangular prism. The moving and fixed platforms are connected to each other by means of two identical parallel manipulators. Simple forward kinematics and reduced singular regions are the main benefits offered by the proposed parallel manipulator. The Input–Output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory. A case study, which is verified with the aid of commercially available software, is included with the purpose to exemplify the application of the method of kinematic analysis.

Workspace Optimization of a Six Degrees of Freedom Parallel Manipulator for Micromachining

2010 ◽  
Author(s):  
Ahmet Agaoglu ◽  
Namik Ciblak ◽  
Koray K. Safak
Keyword(s):  
Numerical Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Base Plane ◽  
Six Degrees Of Freedom ◽  
Moving Platform ◽  
Workspace Optimization ◽  
Kinematic Diagram ◽  
Orientation Workspace

This work addresses the optimization of the workspace of a six degrees of freedom parallel manipulator. In this study, The topology of the manipulator is composed of three xy-tables, symmetrically positioned on a circle on a base plane, connected by three legs to a moving platform. Kinematic composition of the manipulator is introduced and kinematic diagram is illustrated. Orientation workspace is investigated using three different orientation representations. XYZ fixed angles representation is selected considering the benefits of its visualization are considered. By using this representation, the orientation workspace is modeled and kinematic circuits of the manipulator are explored. First, optimization is performed without slider limitations. A result table is obtained based on the user defined parameters. Secondly, optimization is performed under slider limitations. The maximal orientation capability is optimized using numerical analysis. The optimized configuration of the manipulator indicates that a 330% increase in orientation capability is achieved, compared to the old configuration.

A class of reconfigurable parallel mechanisms with five-bar metamorphic linkage

2016 ◽  
Vol 231 (11) ◽  
pp. 2089-2099 ◽  
Author(s):  
Chunxu Tian ◽  
Yuefa Fang ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Potential Application ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Constraint Force ◽  
Motion Modes ◽  
Moving Platform ◽  
Five Phases ◽  
Serial Chains

This paper presents a planar five-bar metamorphic linkage which has five phases resulting from locking of motors. Reconfigurable limbs are constructed by integrating the five-bar metamorphic linage as sub-chains. The branch transition of metamorphic linkage is analyzed. By adding appropriate joints to the planer five-bar metamorphic linkage, reconfigurable limbs whose constraint can switch among no constraint, a constrained force and a constrained couple are obtained. Serial limb structures that can provide a constraint force and a constraint couple are synthesized based on screw theory. Reconfigurable limbs that have five configurations associated with the five phases of the five-bar metamorphic linkage are assembled with 4-DOF (degrees-of-freedom) serial chains. A class of reconfigurable parallel mechanisms is derived by connecting the moving platform to the base with three identical kinematic limbs. These parallel mechanisms can perform various output motion modes such as 3T, 3R, 2T1R, 1T2R, 3T1R, 2T2R, 1T3R, 2T3R, 3T2R and 3T3R. Finally, the potential application of the proposed mechanisms is analyzed and conclusions are drawn.

scholarly journals A comparison of three-dimensional rotation formalisms for least-squares and Bayesian inverse kinematics

2021 ◽  
Author(s):  
Ben Serrien ◽  
Klevis Aliaj ◽  
Todd Pataky
Keyword(s):  
Least Squares ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Estimation Error ◽  
Computational Cost ◽  
Three Dimensional ◽  
Linear Least Squares ◽  
Computationally Efficient ◽  
Rotational Degrees Of Freedom ◽  
Value Decomposition

Marker-based inverse kinematics (IK) is prone to errors arising from measurementnoise and soft-tissue artefacts. Various least-squares and Bayesian methods canbe applied to limit the estimation error to a minimum. Recently proposed meth-ods like Bayesian IK come at an increased computational cost however. In thistechnical paper, we present an overview of eight different least squares or BayesianIK methods, including their accuracy and computational load for IK problemsinvolving a single rigid body and three rotational degrees-of-freedom, whose at-titude is estimated from four noisy marker positions. The results indicate thatNon-Linear Least Squares, Variational Bayesian and full Bayesian IK are supe-rior to Singular Value Decomposition in terms of accuracy, with approximatelya two-fold error reduction. However, only Non-Linear Least Squares and Varia-tional Bayesian IK are computationally efficient enough to scale towards practicaluse in biomechanical applications, with computational durations of 1-10 ms; fullyBayesian procedures required approximately 30 s for single rotation calculations.All Python code and supplementary material can be found in this paper’s GitHubrepository: https://github.com/benserrien/pybik.

scholarly journals Design and analysis of a 3-DOF planar micromanipulation stage with large rotational displacement for micromanipulation system

2017 ◽  
Vol 8 (1) ◽  
pp. 117-126 ◽  
Author(s):  
Bingxiao Ding ◽  
Yangmin Li ◽  
Xiao Xiao ◽  
Yirui Tang ◽  
Bin Li
Keyword(s):  
Nanoimprint Lithography ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Rotational Displacement ◽  
Revolute Joints ◽  
Kinematic Models ◽  
Lever Mechanism ◽  
Three Degrees Of Freedom

Abstract. Flexure-based mechanisms have been widely used for scanning tunneling microscopy, nanoimprint lithography, fast servo tool system and micro/nano manipulation. In this paper, a novel planar micromanipulation stage with large rotational displacement is proposed. The designed monolithic manipulator has three degrees of freedom (DOF), i.e. two translations along the X and Y axes and one rotation around Z axis. In order to get a large workspace, the lever mechanism is adopted to magnify the stroke of the piezoelectric actuators and also the leaf beam flexure is utilized due to its large rotational scope. Different from conventional pre-tightening mechanism, a modified pre-tightening mechanism, which is less harmful to the stacked actuators, is proposed in this paper. Taking the circular flexure hinges and leaf beam flexures hinges as revolute joints, the forward kinematics and inverse kinematics models of this stage are derived. The workspace of the micromanipulator is finally obtained, which is based on the derived kinematic models.

Sign in / Sign up

Export Citation Format

Share Document