scholarly journals Design and analysis of a 3-DOF planar micromanipulation stage with large rotational displacement for micromanipulation system

2017 ◽  
Vol 8 (1) ◽  
pp. 117-126 ◽  
Author(s):  
Bingxiao Ding ◽  
Yangmin Li ◽  
Xiao Xiao ◽  
Yirui Tang ◽  
Bin Li
Keyword(s):  
Nanoimprint Lithography ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Rotational Displacement ◽  
Revolute Joints ◽  
Kinematic Models ◽  
Lever Mechanism ◽  
Three Degrees Of Freedom

Abstract. Flexure-based mechanisms have been widely used for scanning tunneling microscopy, nanoimprint lithography, fast servo tool system and micro/nano manipulation. In this paper, a novel planar micromanipulation stage with large rotational displacement is proposed. The designed monolithic manipulator has three degrees of freedom (DOF), i.e. two translations along the X and Y axes and one rotation around Z axis. In order to get a large workspace, the lever mechanism is adopted to magnify the stroke of the piezoelectric actuators and also the leaf beam flexure is utilized due to its large rotational scope. Different from conventional pre-tightening mechanism, a modified pre-tightening mechanism, which is less harmful to the stacked actuators, is proposed in this paper. Taking the circular flexure hinges and leaf beam flexures hinges as revolute joints, the forward kinematics and inverse kinematics models of this stage are derived. The workspace of the micromanipulator is finally obtained, which is based on the derived kinematic models.

scholarly journals Charged particle single nanometre manufacturing

2018 ◽  
Vol 9 ◽  
pp. 2855-2882 ◽  
Author(s):  
Philip D Prewett ◽  
Cornelis W Hagen ◽  
Claudia Lenk ◽  
Steve Lenk ◽  
Marcus Kaestner ◽  
...  
Keyword(s):  
Charged Particle ◽  
High Throughput ◽  
Nanoimprint Lithography ◽  
Ion Beam ◽  
Ambient Air ◽  
Particle Beam ◽  
Vacuum System ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Charged Particle Beam

Following a brief historical summary of the way in which electron beam lithography developed out of the scanning electron microscope, three state-of-the-art charged-particle beam nanopatterning technologies are considered. All three have been the subject of a recently completed European Union Project entitled “Single Nanometre Manufacturing: Beyond CMOS”. Scanning helium ion beam lithography has the advantages of virtually zero proximity effect, nanoscale patterning capability and high sensitivity in combination with a novel fullerene resist based on the sub-nanometre C60 molecule. The shot noise-limited minimum linewidth achieved to date is 6 nm. The second technology, focused electron induced processing (FEBIP), uses a nozzle-dispensed precursor gas either to etch or to deposit patterns on the nanometre scale without the need for resist. The process has potential for high throughput enhancement using multiple electron beams and a system employing up to 196 beams is under development based on a commercial SEM platform. Among its potential applications is the manufacture of templates for nanoimprint lithography, NIL. This is also a target application for the third and final charged particle technology, viz. field emission electron scanning probe lithography, FE-eSPL. This has been developed out of scanning tunneling microscopy using lower-energy electrons (tens of electronvolts rather than the tens of kiloelectronvolts of the other techniques). It has the considerable advantage of being employed without the need for a vacuum system, in ambient air and is capable of sub-10 nm patterning using either developable resists or a self-developing mode applicable for many polymeric resists, which is preferred. Like FEBIP it is potentially capable of massive parallelization for applications requiring high throughput.

A Model of the Human Spine: Forward and Inverse Kinematics

1992 ◽  
Author(s):  
Sunil Kumar Agrawal ◽  
Siyan Li ◽  
Glen Desmier
Keyword(s):  
Range Of Motion ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Joint Angles ◽  
Human Spine ◽  
Forward And Inverse Kinematics ◽  
Position And Orientation ◽  
Three Degrees Of Freedom ◽  
Adjacent Vertebra

Abstract The human spine is a sophisticated mechanism consisting of 24 vertebrae which are arranged in a series-chain between the pelvis and the skull. By careful articulation of these vertebrae, a human being achieves fine motion of the skull. The spine can be modeled as a series-chain with 24 rigid links, the vertebrae, where each vertebra has three degrees-of-freedom relative to an adjacent vertebra. From the studies in the literature, the vertebral geometry and the range of motion between adjacent vertebrae are well-known. The objectives of this paper are to present a kinematic model of the spine using the available data in the literature and an algorithm to compute the inter vertebral joint angles given the position and orientation of the skull. This algorithm is based on the observation that the backbone can be described analytically by a space curve which is used to find the joint solutions..

Dynamics of redundant robots – inverse solutions

Robotica ◽  
1986 ◽  
Vol 4 (4) ◽  
pp. 263-267 ◽  
Author(s):  
Ronald L. Huston ◽  
Timothy P. King
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Solution Algorithm ◽  
Redundant Robot ◽  
Redundant Robots ◽  
Revolute Joints ◽  
Inverse Kinematics Problem ◽  
Inverse Solutions ◽  
Natural Dynamics ◽  
Least Energy

SUMMARYThe dynamics of “simple, redundant robots” are developed. A “redundant” robot is a robot whose degrees of freedom are greater than those needed to perform a given kinetmatic task. A “simple” robot is a robot with all joints being revolute joints with axes perpendicular or parallel to the arm segments. A general formulation, and a solution algorithm, for the “inverse kinematics problem” for such systems, is presented. The solution is obtained using orthogonal complement arrays which in turn are obtained from a “zero-eigenvalues” algorithm. The paper concludes with an assertion that this solution, called the “natural dynamics solution,” is optimal in that it requires the least energy to drive the robot.

scholarly journals Design and Kinematic Analysis of a Novel 2-DoF Closed-Loop Mechanism for the Actuation of Machining Robots

2021 ◽  
Author(s):  
Angelica Ginnante ◽  
François Leborne ◽  
Stéphane Caro ◽  
Enrico Simetti ◽  
Giuseppe Casalino
Keyword(s):  
Degrees Of Freedom ◽  
Closed Loop ◽  
Parallel Mechanisms ◽  
Serial Manipulators ◽  
Hard Materials ◽  
Serial Robots ◽  
Revolute Joints ◽  
Machining Robot ◽  
Kinematic Models ◽  
Kinematic Performance

Abstract The essential characteristics of machining robots are their stiffness and their accuracy. For machining tasks, serial robots have many advantages such as large workspace to footprint ratio, but they often lack the stiffness required for accurately milling hard materials. One way to increase the stiffness of serial manipulators is to make their joints using closed-loop or parallel mechanisms instead of using classical prismatic and revolute joints. This increases the accuracy of a manipulator without reducing its workspace. This paper introduces an innovative two degrees of freedom closed-loop mechanism and shows how it can be used to build serial robots featuring both high stiffness and large workspace. The design of this mechanism is described through its geometric and kinematic models. Then, the kinematic performance of the mechanism is analyzed, and a serial arrangement of several such mechanisms is proposed to obtain a potential design of a machining robot.

Reconfigurable Mechanisms From the Intersection of Surfaces

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
P. C. López-Custodio ◽  
J. M. Rico ◽  
J. J. Cervantes-Sánchez ◽  
G. I. Pérez-Soto
Keyword(s):  
Degrees Of Freedom ◽  
Kinematic Chain ◽  
Mobility Analysis ◽  
Revolute Joint ◽  
Revolute Joints ◽  
Reconfigurable Mechanisms ◽  
Three Degrees Of Freedom

The method of intersection of surfaces generated by kinematic dyads is applied to obtain mechanisms that are able to shift from one mode of motion to another. Then a mobility analysis shows that the singularities of the generated surfaces can be used to obtain mechanisms which can change their number of degrees-of-freedom depending on its configuration. The generator dyads are connected as usually done by a spherical pair. However, in the cases shown in this contribution the three-degrees-of-freedom of the spherical pair are not all necessary to keep the kinematic chain closed and movable, and the spherical pair can be substituted by either a pair of intersecting revolute joints or a single revolute joint. This substitution can be obtained by means of two methods presented in this contribution.

Kinematic Analysis of a New 3-DOF Translational Parallel Manipulator

2005 ◽  
Author(s):  
Yangmin Li ◽  
Qingsong Xu
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Industrial Applications ◽  
Forward Kinematics ◽  
Physical Constraints ◽  
Mechanical Joints ◽  
Reachable Workspace ◽  
Three Degrees Of Freedom

A novel three-degrees-of-freedom (3-DOF) translational parallel manipulator (TPM) with orthogonally arranged fixed actuators is proposed in this paper. The mobility of the manipulator is analyzed via screw theory. The inverse kinematics, forward kinematics, and velocity analyses are performed and the singularities and isotropic configurations are investigated in details afterwards. Under different cases of physical constraints imposed by mechanical joints, the reachable workspace of the manipulator is geometrically generated and compared. Especially, it is illustrated that the manipulator in principle possesses a fairly regular like workspace with a maximum cuboid defined as the usable workspace inscribed and one isotropic configuration involved. Furthermore, the singularity within the usable workspace is verified, and simulation results show that there exist no any singular configurations within the specified workspace. Therefore, the presented new manipulator has a great potential for high precision industrial applications such as assembly, machining, etc.

scholarly journals Real-Time Posture Control for a Robotic Manipulator Using Natural Human–Computer Interaction

Proceedings ◽  
2018 ◽  
Vol 4 (1) ◽  
pp. 31
Author(s):  
Guillaume Plouffe ◽  
Pierre Payeur ◽  
Ana-Maria Cretu
Keyword(s):  
Real Time ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Robotic Arm ◽  
Human Hand ◽  
Graphical Interface ◽  
Left Hand ◽  
Human Control ◽  
Depth Data ◽  
Three Degrees Of Freedom

In this paper, we propose a vision-based recognition approach to control the posture of a robotic arm with three degrees of freedom (DOF) using static and dynamic human hand gestures. Two different methods are investigated to intuitively control a robotic arm posture in real-time using depth data collected by a Kinect sensor. In the first method, the user’s right index fingertip position is mapped to compute the inverse kinematics on the robot. Using the Forward And Backward Reaching Inverse Kinematics (FABRIK) algorithm, the inverse kinematics (IK) solutions are displayed in a graphical interface. Using this interface and his left hand, the user can intuitively browse and select a desired robotic arm posture. In the second method, the user’s left index position and direction are respectively used to determine the end-effector position and an attraction point position. The latter enables the control of the robotic arm posture. The performance of these real-time natural human control approaches is evaluated for precision and speed against static and dynamic obstacles.

FEM Based Numerical Simulation of Delta Parallel Mechanism

2013 ◽  
Vol 690-693 ◽  
pp. 2978-2981 ◽  
Author(s):  
Jian Zhong Zhang ◽  
Xin Peng Xie ◽  
Chuan Jin Li ◽  
Ying Ying Xin ◽  
Zhao Ming He
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Theoretical Foundation ◽  
Future Research ◽  
Element Analysis ◽  
Pick And Place ◽  
Integral Structure ◽  
Inverse Dynamics Analysis ◽  
Three Degrees Of Freedom

This paper describes a parallel three degrees of freedom delta mechanism used for pick-and-place. It has the advantages of simple integral structure, strong bearing capacityhigh precisionkinematics and dynamics performance. According to this mechanism wide development prospect, the company study on the inverse kinematics inverse dynamics analysis and the static analysis by using ANSYS finite element analysis Software of Delta. These analyses have laid a good theoretical foundation for future research. These researches provide possible for widely used in foodpackingautomated assembly line occasions of small and medium-sized enterprises.

Accuracy estimation of a stretch-retractable single section continuum manipulator based on inverse kinematics

2019 ◽  
Vol 46 (5) ◽  
pp. 573-580
Author(s):  
Hao Wang ◽  
GuoHua Gao ◽  
Qixiao Xia ◽  
Han Ren ◽  
LianShi Li ◽  
...  
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Content Type ◽  
Kinematics Model ◽  
Six Degrees Of Freedom ◽  
Single Section ◽  
Motion Range ◽  
Continuum Manipulator ◽  
Three Degrees Of Freedom

Purpose The purpose of this paper is to present a novel stretch-retractable single section (SRSS) continuum manipulator which owns three degrees of freedom and higher motion range in three-dimension workspace than regular single continuum manipulator. Moreover, the motion accuracy was analyzed based on the kinematic model. In addition, the experiments were carried out for validation of the theory. Design/methodology/approach A kinematics model of the SRSS continuum manipulator is presented for analysis on bending, rotating and retracting in its workspace. To discuss the motion accuracy of the SRSS continuum manipulator, the dexterity theory was introduced based on the decomposing of the Jacobian matrix. In addition, the accuracy of motion is estimated based on the inverse kinematics and dexterity theory. To verify the presented theory, the motion of free end was tracked by an electromagnetic positioning system. According to the comparison of experimental value and theoretical analysis, the free end error of SRSS continuum manipulator is less than 6.24 per cent in the region with favorable dexterity. Findings This paper presents a new stretch-retractable continuum manipulator that the structure was composed of several springs as the backbone. Thus, the SRSS continuum manipulator could own wide motion range depending on its retractable structure. Then, the motion accuracy character of the SRSS continuum manipulator in the different regions of its workspace was obtained both theoretically and experimentally. The results show that the high accuracy region distributes in the vicinity of the outer boundary of the workspace. The motion accuracy gradually decreases with the motion position approaching to the center of its workspace. Research limitations/implications The presented SRSS continuum manipulator owns three degrees of freedom. The future work would be focused on the two-section structure which will own six degrees of freedom. Practical implications In this study, the SRSS continuum manipulator could be extended to six degrees of freedom continuum robot with two sections that is less one section than regular six degrees of freedom with three single section continuum manipulator. Originality/value The value of this study is to propose a SRSS continuum manipulator which owns three degrees of freedom and could stretch and retract to expend workspace, for which the accuracy in different regions of the workspace was analyzed and validated based on the kinematics model and experiments. The results could be feasible to plan the motion space of the SRSS continuum manipulator for keeping in suitable accuracy region.

scholarly journals Design and analysis of a class of redundant collaborative manipulators with 2D large rotational angles

2019 ◽  
Vol 15 (1) ◽  
pp. 66-80
Author(s):  
Xiaodong Jin ◽  
Yuefa Fang ◽  
Dan Zhang ◽  
Xueling Luo
Keyword(s):  
Machine Tools ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Rotational Axis ◽  
Revolute Joints ◽  
3D Printers ◽  
Rotational Degrees Of Freedom ◽  
Moving Platform ◽  
Orientation Workspace

AbstractThe parallel spindle heads with high rotational capability are demanded in the area of multi-axis machine tools and 3D printers. This paper focuses on designing a class of 2R1T (R: Rotation; T: Translation) parallel spindle heads and the corresponding collaborative 5-axis manipulators with 2-dimension (2D) large rotational angles. In order to construct 2D rotational degrees of freedom (DOFs), a platform with 2D revolute joints is proposed first. Based on the constraint screw theory, the feasible limbs that can be connected in the platform are synthesized. In order to provide constant rotational axis for the platform, a class of redundant limbs are designed. A class of redundant 2R1T parallel spindle heads is obtained by connecting the redundant limbs with the platform and the redundant characteristics are verified by the modified Grübler-Kutzbach criterion. The corresponding 5-axis collaborative manipulators are presented by constructing a 2-DOF series translational bottom moving platform. The inverse kinematics and the orientation workspace as well as the decoupling characteristics of this type of 2R1T parallel spindle heads are analyzed. The results show that these manipulators have large 2D rotational angles than the traditional A3/Z3 heads and can be potentially used in the application of multi-axis machine tools and the 3D printers.

Sign in / Sign up

Export Citation Format

Share Document