Primary spacing in directional solidification

1998 ◽  
Vol 29 (13) ◽  
pp. 1113-1119 ◽  
Author(s):  
Dexin Ma ◽  
Peter R. Sahm
2018 ◽  
Vol 15 ◽  
pp. 128-153
Author(s):  
Hui Xing ◽  
Xiang Lei Dong ◽  
Jian Yuan Wang ◽  
Ke Xin Jin

In this paper, we review our results from phase field simulations of tilted dendritic growth dynamics and dendrite to seaweed transition in directional solidification of a dilute alloy. We focus on growth direction selection, stability range and primary spacing selection, and degenerate seaweed-to-tilted dendrite transition in directional solidification of non-axially orientated crystals. For growth direction selection, the DGP law (Phys. Rev. E, 78 (2008) 011605) was modified through take the anisotropic strength and pulling velocity into account. We confirm that the DGP law is only validated in lower pulling velocity. For the stability range and primary spacing selection, we found that the lower limit of primary spacing is irrelative to the misorientation angle but the upper limit is nonlinear with respect to the misorientation angle. Moreover, predicted results confirm that the power law relationship with the orientation correction by Gandin et al. (Metall. Mater. Trans. A. 27A (1996) 2727-2739) should be a universal scaling law for primary spacing selection. For the seaweed-to-dendrite transition, we found that the tip-splitting instability in degenerate seaweed growth dynamics is related to the M-S instability dynamics, and this transition originates from the compromise in competition between two dominant mechanisms, i.e., the macroscopic thermal field and the microscopic interfacial energy anisotropy.


2006 ◽  
Vol 508 ◽  
pp. 463-472 ◽  
Author(s):  
A. Weiß ◽  
Laszlo Sturz ◽  
Gerhard Zimmermann

The movement and morphological change of a solid-liquid interface in directional solidification was investigated during two sounding rocket flights. By using the transparent binary alloy Succinonitrile-Acetone the dynamic processes at the solidification front could be observed directly. Both the planar interface growth, the onset of instability and the characteristic features of the interface morphology, i.e. the evolution of the primary spacing and amplitudes of the cells and dendrites were evaluated. The comparison with a calculation of the morphological instability based on the theoretical model of Warren and Langer showed a good agreement concerning the critical time and velocity of the solidification front.


2005 ◽  
Vol 475-479 ◽  
pp. 2757-2760
Author(s):  
Shan Liu ◽  
R. Trivedi

Models and theories of the microstructure evolution in a directional solidification (DS) process will be firstly addressed. Discrepancies between theories and experiments will be presented. For the thin film sample growth in a temperature gradient stage, the geometrical constraint makes it difficult to compare the experimental primary spacing with theoretical predictions. While for a bulk sample growth, fluid flow always exists in the solidification process despite that the growth interface rejects a lighter or heavier solute. Based on these analyses, the appropriate techniques to conduct DS experiments are proposed that can be used to test models. One is the solidification in a capillary sample where a single cell/dendrite grows. While for array growth in 3 dimensions, long-duration microgravity experiments will be the only viable way to obtain meaningful results.


2021 ◽  
Vol 204 ◽  
pp. 116500
Author(s):  
F.L. Mota ◽  
J. Pereda ◽  
K. Ji ◽  
Y. Song ◽  
R. Trivedi ◽  
...  

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Yaochan Zhu ◽  
Hua Qiu ◽  
Zhijun Wang ◽  
Eckart Schnack

To describe the cell-dendrite transition (CDT) during directional solidification, a new simplified scaling law is proposed and verified by quantitative phase field simulations. This scaling law bears clear physical foundation with consideration of the overall effects of primary spacing, pulling velocity, and thermal gradient on the onset of sidebranches. The analysis results show that the exponent parameters in this simplified scaling law vary within different systems, which mediates the discrepancy of exponent parameters in previous experiments. The scaling law also presents an explanation for the destabilizing mechanism of thermal gradient in sidebranching dynamics.


1998 ◽  
Vol 29 (3) ◽  
pp. 1113-1119 ◽  
Author(s):  
Dexin Ma ◽  
Peter R. Sahm

Author(s):  
H.J. Zuo ◽  
M.W. Price ◽  
R.D. Griffin ◽  
R.A. Andrews ◽  
G.M. Janowski

The II-VI semiconducting alloys, such as mercury zinc telluride (MZT), have become the materials of choice for numerous infrared detection applications. However, compositional inhomogeneities and crystallographic imperfections adversly affect the performance of MZT infrared detectors. One source of imperfections in MZT is gravity-induced convection during directional solidification. Crystal growth experiments conducted in space should minimize gravity-induced convection and thereby the density of related crystallographic defects. The limited amount of time available during Space Shuttle experiments and the need for a sample of uniform composition requires the elimination of the initial composition transient which occurs in directionally solidified alloys. One method of eluding this initial transient involves directionally solidifying a portion of the sample and then quenching the remainder prior to the space experiment. During the space experiment, the MZT sample is back-melted to exactly the point at which directional solidification was stopped on earth. The directional solidification process then continues.


Sign in / Sign up

Export Citation Format

Share Document