Effect of Mn2+ Substitution into the Hst Lattice of ZnO via sol–gel Route for Boosting the Dye-Sensitized Solar Cells Performance

2021 ◽  
Author(s):  
Deepak Kumbhar ◽  
Sagar Delekar ◽  
Sarita Kumbhar ◽  
Ananta Dhodamani ◽  
Namdev Harale ◽  
...  
Keyword(s):  
Solar Cells ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Modelling and Validation of Transmittance from Nanocrystalline Titania film for Photoanodic Action in Dye-Sensitized Solar Cells

2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Divya Jyoti
Keyword(s):  
Solar Cells ◽  
Tin Oxide ◽  
Incident Light ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Dip Coating ◽  
Optical Simulation ◽  
Nanocrystalline Tio2 ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

AbstractA four phase model air/glass/indium doped tin oxide/TiO2 has been studied by modifying Rouard’s model to calculate the final transmittance from TiO2 layer to be used as photoanode in dye-sensitized solar cells. An optical simulation for the reflectance and transmittance has been executed for the constructed nanocrystalline TiO2 films. To validate the theoretical results TiO2 film has been deposited onto indium doped tin oxide (ITO) layer by sol-gel dip coating technique. It has been found that the incident light suffers losses by 5-15% on passage through TiO2 coated ITO layer. Experimentally it has been observed on the basis of efficiency value that meso-nano combination is the best candidate to be used as photoanode in a dye-sensitize solar cell.

Sol-gel based TiO2 paste applied in screen-printed dye-sensitized solar cells and modules

2013 ◽  
Vol 19 (5) ◽  
pp. 1464-1469 ◽  
Author(s):  
Mateja Hočevar ◽  
Urša Opara Krašovec ◽  
Matevž Bokalič ◽  
Marko Topič ◽  
Welmoed Veurman ◽  
...  
Keyword(s):  
Solar Cells ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Screen Printed

Al-doped TiO2 Photoanode for Dye-Sensitized Solar Cells

2011 ◽  
Vol 64 (6) ◽  
pp. 820 ◽  
Author(s):  
Fuzhi Huang ◽  
Yi-Bing Cheng ◽  
Rachel A. Caruso
Keyword(s):  
Solar Cells ◽  
Doping Concentration ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Open Circuit ◽  
Tio2 Electrode ◽  
Doped Tio2 ◽  
Dye Sensitized ◽  
A Cell ◽  
Sensitized Solar Cells

Porous aluminium doped TiO2 was prepared through a sol–gel process in the presence of a template. The doping enlarges the band-gap of the anatase TiO2, which modifies the TiO2 electrical properties. The porous Al/TiO2 films were assembled into dye-sensitized solar cells. A 45 mV enhancement of open-circuit photovoltage and 11% increase of fill factor at 2 wt-% doping concentration, and 8.6% improvement of the overall efficiency at 0.5 wt-% doping concentration were achieved relative to that of a cell containing non-doped TiO2 under the same conditions. This advance is attributed to the increase in conductivity with the Al-doping of the TiO2 electrode.

scholarly journals A New Organic Dye Cordia sebestena Sensitized Solar Cell with Current-Voltage Characteristics

2019 ◽  
Vol 32 (2) ◽  
pp. 342-348
Author(s):  
M. Rekha ◽  
M. Kowsalya
Keyword(s):  
Solar Cells ◽  
Density Functional ◽  
Sol Gel ◽  
Dye Sensitized Solar Cells ◽  
Natural Dye ◽  
Gel Method ◽  
Sol Gel Method ◽  
Dye Sensitized ◽  
Morphological Studies ◽  
Sensitized Solar Cells

Titanium dioxide nanoparticles have been synthesized by a novel modified sol-gel for the fabrication of natural dye sensitized solar cells. The natural photo sensitizer extracted from Cordia sebestena flower was mixed with the precursor solution. The flower dye has put the effort of a surfactant which has resulted colourized TiO2 instead of white TiO2. Whencompared to the conventional sol-gel method, this modified process has enhanced the properties of TiO2 like, morphology, uniformity in dye absorption. It has reduced the agglomeration of TiO2 and dye aggregation significantly. The optimized molecular geometry of sebestenoid D, the major pigment of Cordia sebestena and HOMO-LUMO plot are found using density functional theory. The TiO2 nanoparticles were subjected to structural, optical, spectral and morphological studies which showed improved properties in modified sol-gel process. Ecofriendly and low-cost natural dye sensitized solar cells (DSSC) were fabricated using conventional and pre-dye treated TiO2 sensitized by Cordia sebestena flower extract. The I-V studies showed the solar light photon to electron conversion efficiencies of 0.87 and 1.28 % for sol-gel and modified sol-gel methods, respectively. There has been an enhancement in efficiency by 47 % in modified sol-gel method which is very much promising in terms of efficiency for natural dye sensitized solar cells.

Sign in / Sign up

Export Citation Format

Share Document