Effect of cutting edge preparation on tool performance in hard-turning of DF-3 tool steel with ceramic tools

2014 ◽  
Vol 28 (11) ◽  
pp. 4727-4736 ◽  
Author(s):  
A. Davoudinejad ◽  
M. Y. Noordin
Keyword(s):  
Tool Steel ◽  
Hard Turning ◽  
Cutting Edge ◽  
Ceramic Tools ◽  
Tool Performance ◽  
Cutting Edge Preparation ◽  
Edge Preparation

Edge Preparation on Cutting Force, Cutting Temperature and Tool Wear for Hard Turning

2014 ◽  
Vol 800-801 ◽  
pp. 424-429
Author(s):  
Pei Rong Zhang ◽  
Zhan Qiang Liu
Keyword(s):  
Tool Wear ◽  
Cutting Force ◽  
Hard Turning ◽  
Flank Wear ◽  
Cutting Temperature ◽  
Cutting Edge ◽  
Crater Wear ◽  
Cutting Edge Preparation ◽  
Flank Face ◽  
Edge Preparation

The paper investigates the effects of cutting edge preparation on cutting force, cutting temperature and tool wear for hard turning. An optimized characterization approach is proposed and five kinds of cemented tools with different edge preparation are adopted in the simulations by DEFROM-2DTM. The results show that both the forces and cutting temperature on the rake face climb up and then declines with the increasing of factor K (Sγ/Sα). While the temperature on flank face decrease with the increasing of the factor K. When the cutting conditions are identical, flank wear reduces while crater wear exacerbates before easing with the increasing of the factor K. The simulation results will provide valuable suggestions for optimization of cutting edge preparation for hard turning in order to obtain excellent machining quality and longer tool life.

Cutting Edge Preparation for Cemented Carbide Milling Tools

2009 ◽  
Vol 76-78 ◽  
pp. 597-602 ◽  
Author(s):  
Berend Denkena ◽  
Luis de Leon ◽  
Jens Köhler
Keyword(s):  
Cutting Tool ◽  
Wear Behavior ◽  
Milling Process ◽  
Cutting Edge ◽  
Cemented Carbide ◽  
Process Time ◽  
Tool Performance ◽  
Cutting Edge Preparation ◽  
Milling Tools ◽  
Edge Preparation

After the grinding process, the cutting edges of cemented carbide milling tools tend to chipping. Chipping has a strong influence on the tool performance. For this reason, the cutting edges are further prepared. Additionally, a cutting edge rounding has an impact on the wear behavior and the process stability. For the cutting edge preparation of milling tools, magnetic finishing is a promising process. This paper describes the process of magnetic finishing. The influencing parameters, i.e. the process time and the distance between the cutting tool and the magnetic disks, are investigated. Furthermore, the effect of magnetic finishing on the tool life is demonstrated using the example of a milling process with titanium.

Measuring procedures of cutting edge preparation when hard turning with coated ceramics tool inserts

Measurement ◽  
2014 ◽  
Vol 55 ◽  
pp. 627-640 ◽  
Author(s):  
Bernhard Karpuschewski ◽  
Konrad Schmidt ◽  
Jozef Beňo ◽  
Ildikó Maňková ◽  
Julia Prilukova
Keyword(s):  
Hard Turning ◽  
Cutting Edge ◽  
Cutting Edge Preparation ◽  
Edge Preparation

Cutting Edge Preparation by Means of Abrasive Brushing

2010 ◽  
Vol 438 ◽  
pp. 1-7 ◽  
Author(s):  
Berend Denkena ◽  
Luis de Leon ◽  
E. Bassett ◽  
M. Rehe
Keyword(s):  
Tool Life ◽  
Cutting Tool ◽  
Market Competition ◽  
Cutting Edge ◽  
Production Costs ◽  
Tool Performance ◽  
Process Reliability ◽  
Cutting Edge Preparation ◽  
Edge Preparation

The need for new cutting tool technologies is driven by the constantly increasing performance of machine tools and the rising market competition. Current research results show that an improved combination of the cutting edge macro- and microgeometry, together with an appropriate substrate and coating, leads to a significant enhancement of cutting tool performance. Furthermore, inappropriate cutting edge microgeometries cause, in addition to the higher production costs, a reduction of the tool life. Hence, it is essential to produce tailored cutting edge microgeometries with high precision and process reliability. This paper presents the influence of brushing process parameters on the size and the form of produced cutting edges of indexable inserts. This leads to a better understanding and higher quality of the cutting edge preparation process by means of abrasive brushes. Furthermore, the process reliability of 5-axes brushing is analyzed. An example of a tool life map presents the significantly enhanced tool performance through cutting edge preparation and its sensitivity towards varying the cutting edge microgeometry.

Kantenpräparation durch Formschleifprozesse*/Cutting edge preparation by form grinding

2017 ◽  
Vol 107 (06) ◽  
pp. 453-460
Author(s):  
E. Prof. Uhlmann ◽  
J. Bruckhoff
Keyword(s):  
Tool Life ◽  
Cutting Tools ◽  
Cutting Edge ◽  
Grinding Processes ◽  
Form Grinding ◽  
Cutting Edge Preparation ◽  
Edge Preparation

Angesichts steigender Anforderungen an Zerspanwerkzeuge nimmt die Schneidkantenpräparation einen immer größer werdenden Stellenwert ein, da sich so die Standzeit von Zerspanwerkzeugen erhöhen lässt. Die bisher eingesetzten Präparationsverfahren eignen sich meist nur für einfache Verrundungen an der Schneidkante. In umfangreichen Untersuchungen wurde die Eignung von Formschleifprozessen zur Herstellung definierter Schneidkantenmikrogeometrien anhand von Arbeitsergebnissen analysiert.   Due to increasing demands on cutting tools cutting edge preparation has a high priority because it influences the tool life. Current cutting edge preparation processes can only generate simple roundings on the cutting edge. By extensive investigations the suitability of form grinding processes for the production of defined microgeometries on the cutting edge was analysed.

Schneidkantenpräparation von VHM-Mikrofräsern*/Cutting edge preparation of cemented carbide micro milling tools – A comparison of different fine machining processes

2015 ◽  
Vol 105 (11-12) ◽  
pp. 805-811
Author(s):  
E. Uhlmann ◽  
D. Oberschmidt ◽  
A. Löwenstein ◽  
M. Polte ◽  
I. Winker
Keyword(s):  
Tool Wear ◽  
Milling Process ◽  
Cutting Edge ◽  
Micro Milling ◽  
Machining Processes ◽  
Process Reliability ◽  
Cutting Edge Preparation ◽  
Milling Tools ◽  
Edge Preparation

Die Prozesssicherheit beim Mikrofräsen lässt sich mit einer gezielten Schneidkantenverrundung erheblich steigern. Dabei werden durch verschiedene Präparationstechnologien unterschiedliche Geometrien und Einflüsse auf den Fräsprozess erzeugt. Der Fachbeitrag behandelt den Einsatz präparierter Mikrowerkzeuge in Zerspanversuchen, in denen auf die Zerspankräfte, den Verschleiß sowie die Oberflächengüten eingegangen wird.   Process reliability in micro milling can be increased by a defined cutting edge preparation. Different cutting edge preparations cause different effects on tool behavior in the downstream micro milling process. In this paper, the process forces, the tool wear and the surface quality of prepared micro milling tools are characterized in cutting tests.

Sign in / Sign up

Export Citation Format

Share Document