Assessment of groundwater quality from semi-arid area for drinking purpose using statistical, water quality index (WQI) and GIS technique

2020 ◽  
Vol 35 (1) ◽  
Author(s):  
Mohammed Bahir ◽  
Salah Ouhamdouch ◽  
Driss Ouazar ◽  
Abdelghani Chehbouni
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Arid Area ◽  
Gis Technique ◽  
Semi Arid ◽  
Drinking Purpose

Suitability Assessment of Groundwater Quality for Drinking Purpose by Physicochemical Characterization and Water Quality Index from Haveli Region, India

2019 ◽  
Vol 2 (2) ◽  
pp. 83-90 ◽  
Author(s):  
Smitarani Lad ◽  
Swati Mukherjee ◽  
Bhavana Umrikar
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Physicochemical Characterization ◽  
Total Hardness ◽  
Prime Concern ◽  
The Impact ◽  
Drinking Purpose

The emulsification of major constituents in groundwater is accentuated to highlight the impact that is anticipated to be the prime concern due to depleting quality of this resource used for drinking purpose. In view of this, 53 groundwater samples of dug wells taping basaltic water table aquifer located in Haveli taluka adjoining Pune city of Maharashtra, India were collected and analyzed for major cations and anions to evaluate the suitability using water quality index (WQI). The parameters such as pH, Total Hardness (TH), Sodium (Na) and Sulphate (SO4) were assigned with weight 5 and the weight 1 considered as lowest level was assigned to Calcium (Ca++), Magnesium (Mg++), Potassium (K+), Carbonate (CO3--), Bicarbonate (HCO3-) and Phosphate (PO4) and observations were made to know the groundwater quality of the study area. Using these values, the WQI was calculated that revealed according to BIS standards 57% of samples falls in good category, and 43% samples in poor category, while according to WHO standards 38%, 57%, 6% were representing excellent, good and poor category, respectively.

scholarly journals Evaluation of Groundwater Quality for Drinking Purpose using Different Water Quality Indices in Parts of Gautam Budh Nagar District, India

2020 ◽  
Vol 32 (5) ◽  
pp. 1128-1138
Author(s):  
Meenu Agarwal ◽  
Meenakshi Singh ◽  
Jakir Hussain
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Pure Water ◽  
Groundwater Samples ◽  
Canadian Council ◽  
Ccme Wqi ◽  
Drinking Purpose

Water Quality Index (WQI) is a mathematical value for quality of water, which includes the concentration of a number of constituents present in it. Chemical and biological measures of water quality are used to represent water quality index. Measured value of the selected parameters, ideal concentration of that parameter in pure water and standard value given by different quality control organizations are used to determine this number. In the present study, three indexing methods; Weighted Arithmetic Water Quality Index (WAWQI), Groundwater Quality Index (GWQI) and Canadian Council of Ministers of the Environment Water Quality Index (CCME WQI) were used to calculate water quality index of groundwater. A hydrochemical analysis of 22 groundwater samples was conducted to evaluate the quality of groundwater for drinking purpose. Ten hydrochemical parameters were selected for computing WQIs of groundwater samples and BIS standards were used for standardization. Analytical results show that 100 % of samples have magnesium and total hardness above the acceptable limit of BIS (10500, 2012). The mean concentration of nitrate was found 196.96 ± 9.3.18 mg/L. Spatial distribution of various parameters shows that south-east part of study area has contaminated groundwater. The results of water quality index shows that drinking water quality of 82 % (WAWQI), 95 % (GWQI) and 77 % (CCME WQI) of groundwater samples were poor to unsuitable type. Water quality index map also reveals that groundwater of village Badhpura, Dhoom Manikpur, Dairy Maccha, Khera Dharampura, Bisrakh road, Duryai and Dujana of district Gautam Budh Nagar of India, was not fit for human consumption.

scholarly journals Assessment and modeling of groundwater quality by using water quality index (WQI) and GIS technique in meknes aquifer (Morocco)

2021 ◽  
pp. 1-13
Author(s):  
El Moustaine Radouane ◽  
Abdelkader Chahlaoui ◽  
Abdelmonaim Maliki ◽  
Abderrazzaq Boudellah
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Gis Technique

scholarly journals Assessment of groundwater quality in Khulna city of Bangladesh in terms of water quality index for drinking purpose

2020 ◽  
Vol 10 (11) ◽  
Author(s):  
Asif Mahmud ◽  
Shraboni Sikder ◽  
Jagadish Chandra Joardar
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Groundwater Quality ◽  
Water Samples ◽  
Water Quality Index ◽  
Quality Index ◽  
Total Hardness ◽  
Tube Wells ◽  
Drinking Purpose

Abstract Valuation of water quality index (WQI) is one of the simplest, easily understandable, and efficacious techniques to evaluate the quality and suitability of water for drinking as well as other purposes. This research was aimed to investigate the drinking water quality of tube wells from different areas in Khulna City, Bangladesh, by developing the WQI. Water samples from 59 tube wells were collected from different locations during the pre-monsoon time. pH, electric conductivity (EC), dissolve oxygen (DO), total dissolved solid (TDS), chloride (Cl−), nitrate (NO3−), and total hardness of the collected water samples were analyzed for the calculation of WQI. The mean value for pH, EC, DO, TDS, Cl−1, NO3−, and total hardness was 7.30, 1650 μS/cm, 1.60 mg/l, 1188.7 mg/l, 414.6 mg/l, 0.029 mg/l, and 52.03 mg/l, respectively. The calculated WQI values for individual places were distributed spatially through mapping by using ArcGIS software. Based on the WQI values, the drinking water was categorized into excellent, good, poor, very poor, and unfit for drinking purposes. The calculated WQI values ranged from 40.11 to 454.37 with an average value of 108.94. Among all the groundwater samples, 11.86% were excellent, 54.24% were good, 23.73% were poor, 1.69% were very poor, and 8.47% were unfit for drinking purpose based on WQI. The results showed that the groundwater quality of most of the studied areas of Khulna city could be considered safe and suitable for drinking barring the elevated EC and chloride content in some areas. Since Khulna city is situated in the southwestern part of Bangladesh and gradually approaches toward the base level of the Bay of Bengal which might be the source of salt concentration in the groundwater of Khulna city, Bangladesh.

Sign in / Sign up

Export Citation Format

Share Document