Instrumented Engine Bearings for Lubricant Film Thickness Measurement

MTZ worldwide ◽  
2021 ◽  
Vol 83 (1) ◽  
pp. 28-37
Author(s):  
Henry Brunskill ◽  
Andrew Hunter ◽  
Hosung Nam ◽  
Junsik Park
Keyword(s):  
Film Thickness ◽  
Thickness Measurement ◽  
Lubricant Film ◽  
Lubricant Film Thickness ◽  
Film Thickness Measurement

scholarly journals Grease film thickness measurement in rolling bearing contacts

2020 ◽  
pp. 135065012096127
Author(s):  
Xingnan Zhang ◽  
Romeo Glovnea
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Rolling Bearing ◽  
Thickness Measurement ◽  
Lubricant Film ◽  
Rolling Element Bearings ◽  
Lubricant Film Thickness ◽  
Rolling Bearings ◽  
Rolling Element ◽  
Film Thickness Measurement

Rolling bearings are the second most used machine components. They work in what it is called elastohydrodynamic lubrication regime. The geometry of rolling element bearings makes the direct measurement of the lubricant film thickness a challenging task. Optical interferometry is widely used in laboratory conditions for studying elastohydrodynamic lubrication however it cannot be used directly in rolling element bearings thus the only suitable methods are electrical techniques. Of these, film thickness measurement based on electrical capacitance of the contacts has been used in the past by a number of authors. One of the limitations of the capacitance method, when used in rolling bearings, is that it cannot distinguish between the contacts of every rolling element and raceway on one hand and on the other between the inner and outer ring contacts. In the present study the authors used an original test rig which can measure the film thickness for only one ball and separately for the inner and outer rings of a radial ball bearing. This paper thus shows for the first-time results of the lubricant film thickness, at the inner and outer raceways, in grease lubricated rolling bearings.

scholarly journals On the Temperature and Lubricant Film Thickness Distribution in EHL Contacts with Arbitrary Entrainment

Lubricants ◽  
2018 ◽  
Vol 6 (4) ◽  
pp. 101 ◽  
Author(s):  
Milan Omasta ◽  
Jakub Adam ◽  
Petr Sperka ◽  
Ivan Krupka ◽  
Martin Hartl
Keyword(s):  
Film Thickness ◽  
Thermal Effects ◽  
Film Formation ◽  
Thickness Distribution ◽  
Thickness Measurement ◽  
Lubricant Film ◽  
Operating Conditions ◽  
Lubricant Film Thickness ◽  
Machine Parts ◽  
Film Thickness Measurement

An understanding of mechanisms which are responsible for elastohydrodynamic lubricant film formation under high sliding conditions is necessary to increase durability of machine parts. This work combines thin-film colorimetric interferometry for lubricant film thickness measurement and infrared microscopy for in-depth temperature mapping through the contact. The results describe the effect of operating conditions such as speed, slide-to-roll ratio, ambient temperature, and sliding direction on lubricant film thickness and temperature distribution. Film thickness data shows how much the film shape is sensitive to operating conditions when thermal effects are significant, while the temperature profiles provides an explanation of this behavior.

Study of Scale Effect in a Starved Elastohydrodynamically Lubricated Contact

2016 ◽  
Vol 821 ◽  
pp. 138-143
Author(s):  
Petr Svoboda ◽  
David Kostal ◽  
Ivan Křupka ◽  
Martin Hartl
Keyword(s):  
Film Thickness ◽  
Scale Effect ◽  
Thickness Measurement ◽  
Lubricant Film ◽  
Scale Model ◽  
Lubricant Film Thickness ◽  
Film Distribution ◽  
Multiple Contacts ◽  
Optical Test ◽  
Lubricated Contact

The article describes an experimental investigation of scale effect in a starved elastohydrodynamically lubricated contact on lubricant film thickness. Lubricant film thickness and its distribution is one of the most important parameters determining the performance and life of machine parts. Current experimental and numerical studies are mostly connected with oil lubrication. However, greases are used in more than 80 % of all rolling bearings where the starvation phenomenon occurs most frequently. The aim of this work is to compare two approaches to measuring film thickness of different greases. The use of multiple contacts optical test rig based on thin film colorimetric interferometry for film thickness measurement has enables to obtain film thickness of starved contact and the film distribution. The experimental observation of full-scale model of bearing will help to understand better the behavior of real bearing. The evaluation of the experiment was made by chromatic interferometry. This method is used to measure thin lubrication films.

Continuous Lubricant Film Thickness Measurement Between Piston Ring and Cylinder Bore

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Yunus Emre Ayranci ◽  
Ozgen Akalin
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Fiber Optic ◽  
Thickness Measurement ◽  
Test System ◽  
Lubricant Film ◽  
Laser Source ◽  
Bench Test ◽  
Lubricant Film Thickness ◽  
Cylinder Bore

Measurement of film thickness between piston ring and cylinder bore has been a challenge for decades; laser-induced fluorescence (LIF) method was used by several groups, and promising results are obtained for the investigation of lubricant film transport. In this study, blue light generated by a laser source is transmitted to a beam splitter by means of a fiber optic cable and combined with another fiber optic line, then transmitted to the piston ring and cylinder bore conjunction. The light causes the fluorescence dye present in the lubricant to emit light in a longer wavelength, i.e., green. Reflected light is recollected; blue wavelength components are filtered out using a narrow band pass optical filter, and only components in the florescence wavelength is transmitted to a photomultiplier tube. The photomultiplier produces a voltage proportional to instantaneous lubricant film thickness. Then, the photomultiplier signal is calibrated for lubricant film thickness using a laser textured cylinder bore with known geometries. Additional marks were etched on the liner for calibration. The LIF system is adapted to a piston ring and cylinder bore friction test system simulating engine conditions. Static piston ring and reciprocating liner configuration of the bench test system allow the collection of continuous lubricant film thickness data as a function of crank angle position. The developed system has potential to evaluate new designs, materials, and surface properties in a controlled and repeatable environment.

Sign in / Sign up

Export Citation Format

Share Document