Experimental analysis of mechanical properties of graphene/kenaf/basalt reinforced hybrid nanocomposites using response surface methodology

2021 ◽  
Vol 43 (4) ◽  
Author(s):  
Jaber Mirzaei ◽  
Abdolhossein Fereidoon ◽  
Ahmad Ghasemi-Ghalebahman
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Experimental Analysis ◽  
Hybrid Nanocomposites

Experimental study on mechanical properties of polypropylene nanocomposites reinforced with a hybrid graphene/PP-g-MA/kenaf fiber by response surface methodology

2021 ◽  
pp. 009524432110153
Author(s):  
Jaber Mirzaei ◽  
Abdolhossein Fereidoon ◽  
Ahmad Ghasemi-Ghalebahman
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Elastic Modulus ◽  
Response Surface ◽  
Graphene Nanosheets ◽  
Hot Press ◽  
Kenaf Fiber ◽  
Polypropylene Nanocomposites ◽  
Kenaf Fibers ◽  
Internal Mixer

In this study, the mechanical properties of polypropylene (PP)-based nanocomposites reinforced with graphene nanosheets, kenaf fiber, and polypropylene-grafted maleic anhydride (PP-g-MA) were investigated. Response surface methodology (RSM) based on Box–Behnken design (BBD) was used as the experimental design. The blends fabricated in three levels of parameters include 0, 0.75, and 1.5 wt% graphene nanosheets, 0, 7.5, and 15 wt% kenaf fiber, and 0, 3, and 6 wt% PP-g-MA, prepared by an internal mixer and a hot press machine. The fiber length was 5 mm and was being constant for all samples. Tensile, flexural, and impact tests were conducted to determine the blend properties. The purpose of this research is to achieve the highest mechanical properties of the considered nanocomposite blend. The addition of graphene nanosheets to 1 wt% increased the tensile, flexural, and impact strengths by 16%, 24%, and 19%, respectively, and an addition up to 1.5 wt% reduced them. With further addition of graphene nanosheets until 1.5 wt%, the elastic modulus was increased by 70%. Adding the kenaf fiber up to 15 wt% increased the elastic modulus, tensile, flexural, and impact strength by 24%, 84%, 18%, and 11%, respectively. The addition of PP-g-MA has increased the adhesion, dispersion and compatibility of graphene nanosheets and kenaf fibers with matrix. With 6 wt% PP-g-MA, the tensile strength and elastic modulus were increased by 18% and 75%, respectively. The addition of PP-g-MA to 5 wt% increased the flexural and impact strengths by 10% and 5%, respectively. From the entire experimental data, the optimum values for elastic modulus, as well as, tensile, flexural, and impact strengths in the blends were obtained to be 4 GPa, 33.7896 MPa, 57.6306 MPa, and 100.1421 J/m, respectively. Finally, samples were studied by FE-SEM to check the dispersion of graphene nanosheets, PP-g-MA and kenaf fibers in the polymeric matrix.

Optimization of mechanical properties of polypropylene/talc/graphene composites using response surface methodology

2016 ◽  
Vol 53 ◽  
pp. 283-292 ◽  
Author(s):  
Faramarz Ashenai Ghasemi ◽  
Ismail Ghasemi ◽  
Saman Menbari ◽  
Mohsen Ayaz ◽  
Alireza Ashori
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Response Surface

scholarly journals Process Parameter Optimization in Fused Deposition Modeling (FDM) Using Response Surface Methodology (RSM)

2020 ◽  
Author(s):  
Muhammad Salman Mustafa ◽  
Muhammad Qasim Zafar ◽  
Muhammad Arslan Muneer ◽  
Muhammad Arif ◽  
Farrukh Arsalan Siddiqui ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Impact Strength ◽  
Response Surface ◽  
Layer Thickness ◽  
Fused Deposition Modeling ◽  
Experimental Results ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Parameters

Abstract Fused Deposition Modeling (FDM) is a widely adopted additive manufacturing process to produce complex 3D structures and it is typically used in the fabrication of biodegradable materials e.g. PLA/PHA for biomedical applications. However, FDM as a fabrication process for such material needs to be optimized to enhance mechanical properties. In this study, dogbone and notched samples are printed with the FDM process to determine optimum values of printing parameters for superior mechanical properties. The effect of layer thickness, infill density, and print bed temperature on mechanical properties is investigated by applying response surface methodology (RSM). Optimum printing parameters are identified for tensile and impact strength and an empirical relation has been formulated with response surface methodology (RSM). Furthermore, the analysis of variance (ANOVA) was performed on the experimental results to determine the influence of the process parameters and their interactions. ANOVA results demonstrate that 44.7% infill density, 0.44 mm layer thickness, and 20C° printing temperatures are the optimum values of printing parameters owing to improved tensile and impact strength respectively. The experimental results were found in strong agreement with the predicted theoretical results.

Modeling of the mechanical properties of directionally solidified Al-4.3% Cu alloy using response surface methodology

2019 ◽  
Vol 103 (9-12) ◽  
pp. 3913-3925 ◽  
Author(s):  
Muhammad Huzaifa Raza ◽  
Muhammad Sajid ◽  
Ahmad Wasim ◽  
Salman Hussain ◽  
Mirza Jahanzaib
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Directionally Solidified ◽  
Cu Alloy

Predicting of mechanical properties of PP/LLDPE/TiO2 nano-composites by response surface methodology

2016 ◽  
Vol 84 ◽  
pp. 109-120 ◽  
Author(s):  
Sajjad Daneshpayeh ◽  
Faramarz Ashenai Ghasemi ◽  
Ismail Ghasemi ◽  
Mohsen Ayaz
Keyword(s):  
Mechanical Properties ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Nano Composites
Sign in / Sign up

Export Citation Format

Share Document