scholarly journals Numerical investigation of the impact of inclined baffles and an elastic vibrating beam on the thermo-fluid behavior in a rectangular channel

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
S. Faramarzi ◽  
R. Ghasemiasl ◽  
F. Ghadami
Keyword(s):  
Heat Transfer ◽  
Friction Factor ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Rectangular Channel ◽  
List Type ◽  
Maximum Heat ◽  
Fluid Behavior ◽  
Maximum Heat Transfer ◽  
The Impact

AbstractIn the present work, the influence of inclined baffles and an elastic vibrating beam is investigated on the flow pattern and heat transfer rate in a rectangular channel. The cylinder with the elastic vibrating beam develops the vibrating flow. The computations are based on the finite element method (FEM); Galerkin least-squares scheme and Newton–Raphson iterative method are implemented to solve the governing equations. The fluid structure-interaction (FSI) method is used to analyze the elastic vibrating beam. The friction factor coefficient and Nusselt number are examined for the inclined and conventional baffles. The flow regime is assumed to be laminar for various baffle angles and Reynolds numbers. The vibrating beam is connected to the cylinder located in the channel entrance. Optimized cases with the maximum heat transfer and minimum friction factor are introduced. The novelty of this study is the simultaneous use of the elastic vibrating beam and inclined baffles in a rectangular channel. The results show that mounting an elastic vibrating beam on the cylinder leads the heat transfer rate to increase. The channel with an elastic vibrating beam and inclined baffles at 135° is the optimized case compared to other cases.Article Highlights Take advantage of using an elastic vibrating beam in a rectangular channel. Influences of inclined baffles on thermal performance are examined numerically. The optimum case for the channel with inclined-baffles is reported.

scholarly journals Numerical Investigation of Heat Transfer and Friction Factor Characteristics in a Circular Tube Fitted with V-Cut Twisted Tape Inserts

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Sami D. Salman ◽  
Abdul Amir H. Kadhum ◽  
Mohd S. Takriff ◽  
Abu Bakar Mohamad
Keyword(s):  
Heat Transfer ◽  
Friction Factor ◽  
Numerical Investigation ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Twisted Tape ◽  
Maximum Heat ◽  
High Heat Transfer ◽  
Maximum Heat Transfer ◽  
Twist Ratio

Numerical investigation of the heat transfer and friction factor characteristics of a circular fitted with V-cut twisted tape (VCT) insert with twist ratio (y=2.93) and different cut depths (w=0.5, 1, and 1.5 cm) were studied for laminar flow using CFD package (FLUENT-6.3.26). The data obtained from plain tube were verified with the literature correlation to ensure the validation of simulation results. Classical twisted tape (CTT) with different twist ratios (y=2.93, 3.91, 4.89) were also studied for comparison. The results show that the enhancement of heat transfer rate induced by the classical and V-cut twisted tape inserts increases with the Reynolds number and decreases with twist ratio. The results also revealed that the V-cut twisted tape with twist ratioy=2.93and cut depthw=0.5 cm offered higher heat transfer rate with significant increases in friction factor than other tapes. In addition the results of V-cut twist tape compared with experimental and simulated data of right-left helical tape inserts (RLT), it is found that the V-cut twist tape offered better thermal contact between the surface and the fluid which ultimately leads to a high heat transfer coefficient. Consequently, 107% of maximum heat transfer was obtained by using this configuration.

scholarly journals Significance of Shape Factor in Heat Transfer Performance of Molybdenum-Disulfide Nanofluid in Multiple Flow Situations; A Comparative Fractional Study

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3711
Author(s):  
Asifa ◽  
Talha Anwar ◽  
Poom Kumam ◽  
Zahir Shah ◽  
Kanokwan Sitthithakerngkiet
Keyword(s):  
Heat Transfer ◽  
Skin Friction ◽  
Molybdenum Disulfide ◽  
Heat Transfer Rate ◽  
Shape Factor ◽  
Transfer Rate ◽  
Maximum Heat ◽  
Left Wall ◽  
Maximum Heat Transfer ◽  
Mos2 Nanoparticles

In this modern era, nanofluids are considered one of the advanced kinds of heat transferring fluids due to their enhanced thermal features. The present study is conducted to investigate that how the suspension of molybdenum-disulfide (MoS2) nanoparticles boosts the thermal performance of a Casson-type fluid. Sodium alginate (NaAlg) based nanofluid is contained inside a vertical channel of width d and it exhibits a flow due to the movement of the left wall. The walls are nested in a permeable medium, and a uniform magnetic field and radiation flux are also involved in determining flow patterns and thermal behavior of the nanofluid. Depending on velocity boundary conditions, the flow phenomenon is examined for three different situations. To evaluate the influence of shape factor, MoS2 nanoparticles of blade, cylinder, platelet, and brick shapes are considered. The mathematical modeling is performed in the form of non-integer order operators, and a double fractional analysis is carried out by separately solving Caputo-Fabrizio and Atangana-Baleanu operators based fractional models. The system of coupled PDEs is converted to ODEs by operating the Laplace transformation, and Zakian’s algorithm is applied to approximate the Laplace inversion numerically. The solutions of flow and energy equations are presented in terms of graphical illustrations and tables to discuss important physical aspects of the observed problem. Moreover, a detailed inspection on shear stress and Nusselt number is carried out to get a deep insight into skin friction and heat transfer mechanisms. It is analyzed that the suspension of MoS2 nanoparticles leads to ameliorating the heat transfer rate up to 9.5%. To serve the purpose of achieving maximum heat transfer rate and reduced skin friction, the Atangana-Baleanu operator based fractional model is more effective. Furthermore, it is perceived that velocity and energy functions of the nanofluid exhibit significant variations because of the different shapes of nanoparticles.

scholarly journals Maximum Heat Transfer Rate Density in Two-Dimensional Minichannels and Microchannels

2003 ◽  
Author(s):  
M. Favre-Marinet ◽  
S. Le Person ◽  
A. Bejan
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Transition To Turbulence ◽  
Experimental Investigations ◽  
Two Dimensional ◽  
Parallel Plates ◽  
Maximum Heat ◽  
Maximum Heat Transfer ◽  
Optimal Spacing

Experimental investigations of the flow and the associated heat transfer were conducted in two-dimensional microchannels in order to test possible size effects on the laws of hydrodynamics and heat transfer and to infer optimal conditions of use from the measurements. The test section was designed to modify easily the channel height e between 1 mm and 0.1 mm. Measurements of the overall friction factor and local Nusselt numbers show that the classical laws of hydrodynamics and heat transfer are verified for e > 0.4 mm. For lower values of e, a significant decrease of the Nusselt number is observed, whereas the Poiseuille number continues to have the conventional value of laminar developed flow. The transition to turbulence is not affected by the channel size. For fixed pressure drop across the channel, a maximum of heat transfer rate density is found for a particular value of e. The corresponding dimensionless optimal spacing and heat transfer rate density are in very good agreement with the predictions of Bejan and Sciubba (1992). This paper is the first time that the optimal spacing between parallel plates is determined experimentally.

scholarly journals Enhancing Heat Transfer in Tube Heat Exchanger by Inserting Discrete Twisting Tapes with Different Positions

2019 ◽  
Vol 25 (8) ◽  
pp. 39-51
Author(s):  
Nassr Fadhil Hussein ◽  
Abdulrahman Shakir Mahmood
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Constant Heat Flux ◽  
Vertical Position ◽  
Maximum Heat ◽  
Tube Heat Exchanger ◽  
Twisted Tapes ◽  
Maximum Heat Transfer

Enhancement of heat transfer in the tube heat exchanger is studied experimentally by using discrete twisted tapes. Three different positions were selected for inserting turbulators along tube section (horizontal position by α= 00, inclined position by α= 45 0 and vertical position by α= 900). The space between turbulators was fixed by distributing 5 pieces of these turbulators with pitch ratio    PR = (0.44). Also, the factor of constant heat flux was applied as a boundary condition around the tube test section for all experiments of this investigation, while the flow rates were selected as a variable factor (Reynolds number values vary from 5000 to 15000). The results show that using discrete twisted tapes enhances the heat transfer rate by about 60.7-103.7 % compared with plane tube case. Also, inserting turbulators with inclined position offers maximum heat transfer rate by 103.7%.  

Sign in / Sign up

Export Citation Format

Share Document