scholarly journals The effect of severe plastic deformation on the IF steel properties, evolution of structure and crystallographic texture after dual rolls equal channel extrusion deformation

2021 ◽  
Vol 21 (4) ◽  
Author(s):  
M. B. Jabłońska ◽  
K. Kowalczyk ◽  
M. Tkocz ◽  
R. Chulist ◽  
K. Rodak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Crystallographic Texture ◽  
Room Temperature ◽  
Low Carbon Steel ◽  
If Steel ◽  
Low Carbon ◽  
Initial State ◽  
Structural Investigations

AbstractThis paper presents some results of the influence of severe plastic deformation on the microstructure evolution, grain refinement aspect, and mechanical properties of ultra-low carbon steel. Ti-stabilized experimental IF steel was deformed at a room temperature with unconventional SPD process—dual rolls equal channel extrusion (DRECE). Mechanical properties and structure of ferritic steel in initial state and after selected steps of deformation were investigated. The mechanical properties were determined by static tensile tests carried out at a room temperature and microhardness research. The structural investigations involved using scanning transmission electron microscopy observations, electron back scattered diffraction and measurements of the crystallographic texture. The DRECE process affects the evolution of the structure. The microstructural investigations revealed that the processed strips exhibited a dislocation cell and grain structures with mostly low angle grain boundaries. The electron backscattering diffraction (EBSD) examination showed that the processed microstructure is homogeneous along the strips thickness. The mechanical properties of the DRECE-processed IF steel strips increased with an increase the number of passes.

The Evolution of Structure and Mechanical Properties of Fe-Mn-V-Ti-0,1C Low-Carbon Steel Subjected to Severe Plastic Deformation and Subsequent Annealing

2012 ◽  
Vol 715-716 ◽  
pp. 994-999 ◽  
Author(s):  
Galina G. Zakharova ◽  
Elena G. Astafurova ◽  
Evgeny V. Naydenkin ◽  
Georgy I. Raab ◽  
Sergey V. Dobatkin
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
High Pressure Torsion ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Angular Pressing ◽  
Ultrafine Grained ◽  
Average Size

The present work deals with the evolution of mechanical properties and structure of low-carbon Fe-1,12Mn-0,08V-0,07Ti-0,1C (wt.%) steel after severe plastic deformation (SPD) and high-temperature annealing. Steel in initial ferritic-pearlitic state was deformed by equal channel angular pressing (ECAP) at T=200°C and high pressure torsion (HPT) at room temperature. The evolution of ultrafine grained structure and its thermal stability were investigated after annealing at 400-700°C for 1 hour. The results shown that SPD leads to formation of structure with an average size of (sub-) grain of 260 nm after ECAP and 90 nm after HPT. Ultrafine grained structures produced by SPD reveal a high thermal stability up to 500°C after ECAP and 400°C after HPT. At higher annealing temperatures a growth of structural elements and a decrease in microhardness were observed.

The Evolution of Structure and Mechanical Properties of Fe-Mn-V-Ti-0,1C Low-Carbon Steel Subjected to Severe Plastic Deformation and Subsequent Annealing

2010 ◽  
Vol 667-669 ◽  
pp. 325-330 ◽  
Author(s):  
Galina G. Zakharova ◽  
Elena G. Astafurova ◽  
Evgeny V. Naydenkin ◽  
Georgy I. Raab ◽  
Sergey V. Dobatkin
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
High Pressure Torsion ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Angular Pressing ◽  
Ultrafine Grained ◽  
Average Size

The present work deals with the evolution of mechanical properties and structure of low-carbon Fe-1,12Mn-0,08V-0,07Ti-0,1C (wt.%) steel after severe plastic deformation (SPD) and high-temperature annealing. Steel in initial ferritic-pearlitic state was deformed by equal channel angular pressing (ECAP) at T=200°C and high pressure torsion (HPT) at room temperature. The evolution of ultrafine grained structure and its thermal stability were investigated after annealing at 400-700°C for 1 hour. The results shown that SPD leads to formation of structure with an average size of (sub-) grain of 260 nm after ECAP and 90 nm after HPT. Ultrafine grained structures produced by SPD reveal a high thermal stability up to 500°C after ECAP and 400°C after HPT. At higher annealing temperatures a growth of structural elements and a decrease in microhardness were observed.

The Influence of Severe Plastic Deformation Process on Structure and Properties of AZ 31 Alloy after Selected Heat Treatment

2018 ◽  
Vol 275 ◽  
pp. 134-146
Author(s):  
Stanislav Rusz ◽  
Ondřej Hilšer ◽  
Stanislav Tylšar ◽  
Lubomír Čížek ◽  
Tomasz Tański ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Structure Refinement ◽  
Hardness Measurement ◽  
Az31 Alloy ◽  
Strength Properties ◽  
Aviation Industry ◽  
Initial State

The technology of structure refinement in materials with the aim of achieving substantial mechanical properties and maintaining the required plasticity level is becoming increasingly useful in industrial practice. Magnesium alloys are very progressive materials for utilization in practice thanks to their high strength-to-weight ratios (tensile strength/density). The presented paper analyses the effect of the input heat treatment of the AZ31 alloy on the change of structure and strength properties through the process of severe plastic deformation (SPD), which finds an increasing utilization, especially in the automotive and aviation industry. For the study of the influence of the SPD process (ECAP method) on the properties of the AZ31 alloy, two types of thermal treatment of the initial state of the structure were selected. The analysis of the structure of the AZ31 alloy was performed in the initial state without heat treatment and subsequently after heat treatment. In the next part, the influence of the number of passes on the strengthening curves was evaluated. Mechanical properties of the AZ31 alloy after ECAP were evaluated by hardness measurement and completed by structure analysis.

Superplasticity of Aerospace 7075 (Al-Zn-Mg-Cu) Aluminium Alloy Obtained by Severe Plastic Deformation

2018 ◽  
Vol 385 ◽  
pp. 39-44 ◽  
Author(s):  
Fernando Carreño ◽  
Oscar A. Ruano
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Aluminium Alloy ◽  
Room Temperature ◽  
Grain Boundary Sliding ◽  
Strain Rates ◽  
Aerospace Applications ◽  
Boundary Sliding ◽  
Processing Stress

The 7075 (Al-Zn-Mg-Cu) aluminium alloy is the reference alloy for aerospace applications due to its specific mechanical properties at room temperature, showing excellent tensile strength and sufficient ductility. Formability at high temperature can be improved by obtaining superplasticity as a result of fine, equiaxed and highly misoriented grains prone to deform by grain boundary sliding (GBS). Different severe plastic deformation (SPD) processing routes such as ECAP, ARB, HPT and FSP have been considered and their effect on mechanical properties, especially at intermediate to high temperatures, are studied. Refined grains as fine as 100 nm and average misorientations as high as 39o allow attainment of high strain rate superplasticity (HSRSP) at lower than usual temperatures (250-300oC). It is shown that increasing misorientations are obtained with increasing applied strain, and increasing grain refinement is obtained with increasing processing stress. Thus, increasing superplastic strains at higher strain rates, lower stresses and lower temperatures are obtained with increasing processing strain and, specially, processing stress.

Current States and Development of Research on Redissolution and Reprecipitation of Nanoprecipitated Phases in Al–Cu Alloys

2019 ◽  
Vol 11 (11) ◽  
pp. 1489-1501
Author(s):  
Wenjing He ◽  
Caihe Fan ◽  
Shu Wang ◽  
Junhong Wang ◽  
Su Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Room Temperature ◽  
Supersaturated Solid Solution ◽  
Aluminum Matrix ◽  
Aging Treatment ◽  
Cu Alloys ◽  
The Reformation

The evolution of nanoprecipitated phases in Al–Cu alloys under severe plastic deformation (SPD) is summarized in this study. SPD at room temperature induces the precipitation of Al–Cu alloys to dissolve, leading to the reformation of supersaturated solid solution in the aluminum matrix. In the process of SPD or aging treatment after the SPD, the reprecipitated phases are precipitated from the aluminum matrix and the mechanical properties of the alloys are remarkably improved. The mechanism and system of the redissolution of the precipitation phases and the effects of redissolution and reprecipitation on the microstructure and properties of Al–Cu alloys are comprehensively analyzed. The development and future of redissolution and reprecipitation of nanoprecipitated phases in Al–Cu alloys are also described.

Sign in / Sign up

Export Citation Format

Share Document