Active nucleation site density and pool boiling heat transfer—an experimental study

1992 ◽  
Vol 35 (2) ◽  
pp. 271-278 ◽  
Author(s):  
G. Barthau
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Boiling Heat Transfer ◽  
Pool Boiling ◽  
Nucleation Site ◽  
Pool Boiling Heat Transfer ◽  
Site Density ◽  
Nucleation Site Density

scholarly journals Enhancement of the pool boiling heat transfer coefficient using the gas injection into the water

2012 ◽  
Vol 14 (4) ◽  
pp. 100-109 ◽  
Author(s):  
M.M. Sarafraz ◽  
S.M. Peyghambarzadeh ◽  
S.A. Alavi Fazel
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Boiling Heat Transfer ◽  
Pool Boiling ◽  
Nucleation Site ◽  
Pool Boiling Heat Transfer ◽  
Site Density ◽  
Boiling Heat Transfer Coefficient ◽  
Nucleation Site Density

Abstract In this paper, a new method for enhancing the pool boiling heat transfer coefficient of pure liquid, based on the gas injection through the liquids has been introduced. Hence, the effect of gas dissolved in a stagnant liquid on pool boiling heat transfer coefficient, nucleation site density, and bubble departure diameter has experimentally been investigated for different mole fractions of SO2 and various heat fluxes up to 114 kW/ m2. The presence of SO2 in captured vapor inside the bubbles, particularly around the heat transfer surface increases the pool boiling heat transfer coefficient. The available predicted correlations are unable to obtain the reasonable values for pool boiling heat transfer coefficient in this particular case. Therefore, to predict the pool boiling heat transfer coefficient accurately, a new modified correlation based on Stephan-Körner relation has been proposed. Also, during the experiments, it is found that nucleation site density is a strictly exponential function of heat flux. Accordingly, a new correlation has been obtained to predict the nucleation site density. The major application of the nucleation site density is in the estimating of mean bubble diameters as well as local agitation due to the rate of bubble frequency.

Experimental Study of Critical Heat Flux and Heat Transfer Coefficient Enhancements in Pool Boiling Heat Transfer With Nanostructure Modified Active Nucleation Site and Contact Angle

2012 ◽  
Author(s):  
Eric Nolan ◽  
Russell Rioux ◽  
Calvin Hong Li
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Flux ◽  
Contact Angle ◽  
Heat Transfer Coefficient ◽  
Boiling Heat Transfer ◽  
Nucleation Site ◽  
Copper Surfaces ◽  
Site Density ◽  
Nucleation Site Density

An experimental study of nanostructure modified nucleation site density and contact angle that significantly enhances the Heat Transfer Coefficient (HTC) and the Critical Heat Flux (CHF) in pool boiling heat transfer of water on copper surfaces has been conducted. The nanostructures on copper surfaces have been created by an electrodeposition technique. It has been found that the nanostructured copper surfaces show an increase in CHF of up to 142% and an increase in HTC of 33% over that of a mirror-finished plain copper surface. Calculations for nucleation site density and active nucleation site diameter reveal a direct correlation between these factors and the HTC, as well as the CHF. More interestingly, a contact angle study on the tested surfaces shows that there is a connection between the contact angle reduction and CHF enhancement, which confirms the contact angle mechanism of CHF with experimental evidence.

Creation of Nano-Scaled Surface Structure for the Enhancement of Boiling Heat Transfer

2004 ◽  
Author(s):  
Sho Ngai ◽  
A. I. Leontiev ◽  
John R. Lloyd ◽  
S. P. Malyshenko
Keyword(s):  
Heat Transfer ◽  
Boiling Heat Transfer ◽  
Nucleation Site ◽  
Glancing Angle Deposition ◽  
Surface Structures ◽  
Transfer Enhancement ◽  
Site Density ◽  
Glancing Angle ◽  
Angle Deposition ◽  
Nucleation Site Density

The present research is an experimental investigation of nucleate pool boiling heat transfer enhancement on a surface with micro/nano-scaled surface structures. Glancing Angle Deposition (GLAD) was employed to fabricate porous surfaces in this study. The thin film microstructure consists of closely packed columns oriented in the plane of incidence formed due to a self-shadowing mechanism. Boiling heat transfer from the nano-structured surface was compared to that of a smooth reference surface and the commercial High Flux surface. The results of this study have shown that nano-structured films created by the GLAD process increase the nucleation site density as compared to the smooth surface. This research has opened up new areas in the field of heat transfer, which motivate new surface coating concepts to enhance the understanding of boiling heat transfer on nano-structured films.

Comparison of Gas Nucleation and Pool Boiling Site Densities

2004 ◽  
Author(s):  
Yusen Qi ◽  
James F. Klausner
Keyword(s):  
Heat Transfer ◽  
Stainless Steel ◽  
Pool Boiling ◽  
Nucleation Site ◽  
Nucleation Theory ◽  
Distilled Water ◽  
General Validity ◽  
Site Density ◽  
Steel Surfaces ◽  
Nucleation Site Density

It has been well established that the rate of heat transfer associated with boiling systems is strongly dependent on the nucleation site density. Over many years attempts have been made to predict nucleation site density in boiling systems using a variety of techniques. With the exception of specially prepared surfaces, these attempts have met with little success. This paper presents an experimental investigation of nucleation site density measured on roughly polished brass and stainless steel surfaces for gas nucleation and pool boiling over a large parameter space. The fluids used for this study, distilled water and ethanol, are moderately wetting and highly wetting, respectively. Using distilled water it has been observed that the trends of nucleation site density versus the inverse of the critical radius are similar for pool boiling and gas nucleation. The nucleation site density is higher for gas nucleation than for pool boiling. An unexpected result has been observed with ethanol as the heat transfer fluid, which casts doubt on the general validity of heterogeneous nucleation theory. Due to flooding, few sites are active on the brass surface and at most two are active on the stainless steel surface during gas nucleation experiments. However, nucleation sites readily form in large concentration on both the brass and stainless steel surfaces during pool boiling. The nucleation site densities for the rough and mirror polished brass surfaces are also compared. It shows that there is no large difference for the measured nucleation site density.

Sign in / Sign up

Export Citation Format

Share Document