Unlubricated sliding wear mechanism of fine ceramic Si3N4 against high-chromium cast iron

1994 ◽  
Vol 27 (5) ◽  
pp. 349-357 ◽  
Author(s):  
L. Zhou ◽  
L. Fang ◽  
N.X. Wang ◽  
J.E. Zhou
Keyword(s):  
Cast Iron ◽  
Wear Mechanism ◽  
Sliding Wear ◽  
Fine Ceramic ◽  
High Chromium ◽  
High Chromium Cast Iron ◽  
Chromium Cast Iron

Unlubricated sliding wear mechanism of fine ceramics Al2O3 and ZrO2 against high chromium cast iron

Wear ◽  
1994 ◽  
Vol 176 (1) ◽  
pp. 39-48 ◽  
Author(s):  
Zhou Lin ◽  
Gao Yi-Min ◽  
Zhou Jing-En ◽  
Zhou Qing-De
Keyword(s):  
Cast Iron ◽  
Wear Mechanism ◽  
Sliding Wear ◽  
High Chromium ◽  
High Chromium Cast Iron ◽  
Chromium Cast Iron ◽  
Fine Ceramics

Effect of Carbide Orientation on Sliding Wear Behaviour of High Chromium Cast Iron

2016 ◽  
Vol 1136 ◽  
pp. 567-572
Author(s):  
Zheng Yi Jiang ◽  
Xing Jian Gao ◽  
Dong Bin Wei ◽  
Sheng Li Li ◽  
Hong Mei Zhang ◽  
...  
Keyword(s):  
Cast Iron ◽  
Wear Surface ◽  
Sliding Wear ◽  
Volume Fraction ◽  
Wear Behaviour ◽  
Dry Sliding Wear ◽  
High Chromium ◽  
High Chromium Cast Iron ◽  
Chromium Cast Iron ◽  
Sliding Wear Behaviour

The effect of carbide orientation on the dry sliding wear behaviour of high chromium cast iron was studied by pin-on-disc type wear tests at room temperature. The carbide anisotropy was achieved by thermomechanical treatments at temperatures of 950 and 1150 °C. By cladding with low carbon steel, the brittle high chromium cast iron was hot compressed severely with crack free. The thermomechanical treatments not only change the carbide orientation, but also increase the volume fraction of carbides. Due to the long axis of carbide rods is parallel to the wear surface, the high chromium cast iron treated at 1150 °C has a superior wear resistance than the as-cast one, in which the long axis of carbides is perpendicular to the wear surface. For the high chromium cast iron treated at 950 °C, high volume fraction of carbide pits accelerates the wear rate significantly even though it has a similar carbide orientation as the sample treated at 1150 °C. The observations on wear tracks reveal that the ferrous matrix can be protected better from abrasion when the high chromium cast iron was treated at 1150 °C.

The influence of retained austenite in high chromium cast iron on impact-abrasive wear

Wear ◽  
1990 ◽  
Vol 135 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Tong Jian-Min ◽  
Zhou Yi-Zhong ◽  
Shen Tian-Yi ◽  
Deng Hai-Jin
Keyword(s):  
Cast Iron ◽  
Abrasive Wear ◽  
Retained Austenite ◽  
High Chromium ◽  
High Chromium Cast Iron ◽  
Chromium Cast Iron

Modeling Corrosion Property of High Chromium Cast Iron under H3PO4 Medium Condition Using Artificial Intelligence

2010 ◽  
Vol 150-151 ◽  
pp. 1054-1057
Author(s):  
Song Min Zhang ◽  
Liu Jie Xu
Keyword(s):  
Neural Network ◽  
Weight Loss ◽  
Cast Iron ◽  
Bp Neural Network ◽  
Corrosion Property ◽  
Corrosion Properties ◽  
High Chromium ◽  
High Chromium Cast Iron ◽  
Chromium Cast Iron ◽  
Corrosion Time

The components in slurry pump suffer serious corrosion and abrasion in the phosphorus fertilizer manufacturing process because they undergo corrosion of H3PO4 medium and impact of particles at the same time. Presently, High chromium cast irons are often used to produce the components in slurry pump. In order to reveal the corrosive law, the corrosion properties of high chromium cast iron with 26wt.%Cr content (Cr26) were tested under different H3PO4 medium concentration conditions. Using back-propagation (BP) neural network, the non-linear relationship between the corrosion weight losses (W) and H3PO4 concentration, corrosion time (C, t) is established on the base of the dealing with experimental data. The results show that the well-trained BP neural network can predict the wear weight loss precisely according to H3PO4 concentration and corrosion time. The prediction results reveal that corrosion weight loss rises linearly with increasing corrosion time. The H3PO4 concentration has obvious effect on corrosion property. When H3PO4 concentration is lower than about 0.5mol/L, high chromium cast iron has well resistance to H3PO4 corrosion. However, the corrosion resistance of high chromium cast iron rapidly decreases when the H3PO4 concentration exceed about 0.8 mol/L. It is suggest the high chromium cast iron be used under the condition of H3PO4 concentration of lower 0.8 mol/L.

Sign in / Sign up

Export Citation Format

Share Document