Determination of multiphoton ionization cross sections in focused laser experiments

Physica B+C ◽  
1985 ◽  
Vol 128 (3) ◽  
pp. 343-352 ◽  
Author(s):  
G. Baravian ◽  
G. Sultan
1998 ◽  
Vol 57 (1) ◽  
pp. 392-400 ◽  
Author(s):  
C. J. G. J. Uiterwaal ◽  
D. Xenakis ◽  
D. Charalambidis ◽  
P. Maragakis ◽  
H. Schröder ◽  
...  

1971 ◽  
Vol 13 ◽  
pp. 83-87 ◽  
Author(s):  
Howard F. Savage ◽  
Charles A. Boitnott

A crossed beam apparatus has been used to measure the emission and ionization cross sections for the prominent spectral features of Na, Ca, Mg, and Fe in collisions with N2 and O2 over the velocity range of 30 to 120 km/s. From the emission and ionization cross sections, the absolute luminous efficiencies in air were determined over the range of meteor velocities. The maximum luminous efficiencies for the brightest features were: greater than 1 percent for the Na D-lines, 0.2 percent for the CaI(2) singlet, 0.06 percent for the MgI(2) and MgI(3) triplets, and O.4 percent for Fe over the visible spectral range. These luminous efficiencies are valid for free molecular flow conditions for velocities above about 30 km/s and are directly applicable to spectroscopic observations of faint meteors. The luminous efficiency of a typical stone will be presented and compared with the efficiencies determined by other investigators. In contrast to previous work, the luminous efficiency found for stone in the present investigation decreases with velocity above about 50 km/s.


2009 ◽  
Vol 15 (6) ◽  
pp. 524-538 ◽  
Author(s):  
David Bach ◽  
Reinhard Schneider ◽  
Dagmar Gerthsen

AbstractA comprehensive electron energy-loss spectroscopy (EELS) study of niobium (Nb) and stable Nb-oxide phases (NbO, NbO2, Nb2O5) was carried out. Part II of this work is devoted to quantitative EELS by means of experimental k-factors derived from the intensity ratio of the O-K edge and the Nb-M4,5 or Nb-M2,3 edges for all three stable Nb-oxides. The precision and accuracy of the quantification are investigated with respect to the influence of intensity-measurement energy windows, background subtraction, and sample thickness. Integration-window widths allowing optimum accuracy are determined. Owing to background-subtraction errors, the Nb-M4,5 edges rather than Nb-M2,3 are preferred for quantification. Different approaches are applied to improve the precision with regard to thickness-related errors. Thus, a precision up to ±1.5% is achieved by averaging spectra from all three reference oxides to determine a k-factor using Nb-M4,5. Using the experimental k-factor, the determination of atomic concentration ratios CNb/CO in the range of 0.4 (Nb2O5) to 1 (NbO) was found to be possible with an accuracy of 0.6% (relative deviation between measured and nominal composition), whereas ratios of calculated partial ionization cross sections lead to less accurate results.


Author(s):  
Animesh Sharma ◽  
Mikhail Slipchenko ◽  
Mikhail N. Shneider ◽  
Kazi Arafat Rahman ◽  
Alexey Shashurin

Sign in / Sign up

Export Citation Format

Share Document