Directionally solidified (DS) in-situ composites based on (Nb) and Nb silicides, such as Nb5Si3 and Nb3Si, are being investigated for high-temperature structural applications. The use of alloying additions, such as Hf, Ti and Mo, to these silicides is required to enhance their properties. The present paper describes the microstructural response of a DS Nb-silicide based composite to creep testing.The composites investigated were directionally solidified from a molten alloy using the Czochralski method as described previously. Creep tests were conducted at 1200°C to strains of up 50%. Microstructure and microtexture characterizations were performed using scanning electron microscopy, electron microprobe analysis (EMPA), and electron backscatter diffraction pattern analysis (EBSP).Microstructures of the longitudinal section of a DS composite generated from a Nb-12.5Hf-33Ti- 16Si alloy are shown in Figure 1 in the as-DS (left hand side) and the DS+creep tested conditions (right hand side).
Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
