Large-eddy simulation: Application to liquid metal fluid flow and heat transfer

2019 ◽  
pp. 245-271
Author(s):  
Y. Bartosiewicz ◽  
M. Duponcheel
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Liquid Metal ◽  
Large Eddy Simulation ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
Large Eddy

scholarly journals Large-Eddy Simulation Study of Flow and Heat Transfer in Swirling and Non-Swirling Impinging Jets on a Semi-Cylinder Concave Target

2021 ◽  
Vol 11 (15) ◽  
pp. 7167
Author(s):  
Liang Xu ◽  
Xu Zhao ◽  
Lei Xi ◽  
Yonghao Ma ◽  
Jianmin Gao ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Large Eddy Simulation ◽  
Wall Temperature ◽  
Target Surface ◽  
Impinging Jets ◽  
Small Scale ◽  
Complex Flow ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
Large Eddy

Swirling impinging jet (SIJ) is considered as an effective means to achieve uniform cooling at high heat transfer rates, and the complex flow structure and its mechanism of enhancing heat transfer have attracted much attention in recent years. The large eddy simulation (LES) technique is employed to analyze the flow fields of swirling and non-swirling impinging jet emanating from a hole with four spiral and straight grooves, respectively, at a relatively high Reynolds number (Re) of 16,000 and a small jet spacing of H/D = 2 on a concave surface with uniform heat flux. Firstly, this work analyzes two different sub-grid stress models, and LES with the wall-adapting local eddy-viscosity model (WALEM) is established for accurately predicting flow and heat transfer performance of SIJ on a flat surface. The complex flow field structures, spectral characteristics, time-averaged flow characteristics and heat transfer on the target surface for the swirling and non-swirling impinging jets are compared in detail using the established method. The results show that small-scale recirculation vortices near the wall change the nearby flow into an unstable microwave state, resulting in small-scale fluctuation of the local Nusselt number (Nu) of the wall. There is a stable recirculation vortex at the stagnation point of the target surface, and the axial and radial fluctuating speeds are consistent with the fluctuating wall temperature. With the increase in the radial radius away from the stagnation point, the main frequency of the fluctuation of wall temperature coincides with the main frequency of the fluctuation of radial fluctuating velocity at x/D = 0.5. Compared with 0° straight hole, 45° spiral hole has a larger fluctuating speed because of speed deflection, resulting in a larger turbulence intensity and a stronger air transport capacity. The heat transfer intensity of the 45° spiral hole on the target surface is slightly improved within 5–10%.

Large Eddy Simulation of Flow and Heat Transfer Mechanism in Matrix Cooling Channel

2017 ◽  
Author(s):  
Yigang Luan ◽  
Lianfeng Yang ◽  
Bo Wan ◽  
Tao Sun
Keyword(s):  
Heat Transfer ◽  
Flow Field ◽  
Large Eddy Simulation ◽  
Gas Turbine ◽  
Transfer Mechanism ◽  
Heat Transfer Mechanism ◽  
Longitudinal Vortices ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
Large Eddy

Gas turbine engines have been widely used in modern industry especially in the aviation, marine and energy fields. The efficiency of gas turbines directly affects the economy and emissions. It’s acknowledged that the higher turbine inlet temperatures contribute to the overall gas turbine engine efficiency. Since the components are subject to the heat load, the internal cooling technology of turbine blades is of vital importance to ensure the safe and normal operation. This paper is focused on exploring the flow and heat transfer mechanism in matrix cooling channels. In order to analyze the internal flow field characteristics of this cooling configuration at a Reynolds number of 30000 accurately, large eddy simulation method is carried out. Methods of vortex identification and field synergy are employed to study its flow field. Cross-sectional views of velocity in three subchannels at different positions have been presented. The results show that the airflow is strongly disturbed by the bending part. It’s concluded that due to the bending structure, the airflow becomes complex and disordered. When the airflow goes from the inlet to the turning, some small-sized and discontinuous vortices are formed. Behind the bending structure, the size of the vortices becomes big and the vortices fill the subchannels. Because of the structure of latticework, the airflow is affected by each other. Airflow in one subchannel can exert a shear force on another airflow in the opposite subchannel. It’s the force whose direction is the same as the vortex that enhances the longitudinal vortices. And the longitudinal vortices contribute to the energy exchange of the internal airflow and the heat transfer between airflow and walls. Besides, a comparison of the CFD results and the experimental data is made to prove that the numerical simulation methods are reasonable and acceptable.

Effect of Pulsation and Acceleration of Liquid Metal Turbulent Flow Through a Horizontal Channel by Large Eddy Simulation

2020 ◽  
Vol 6 (4) ◽  
Author(s):  
N. Satish ◽  
K. Venkatasubbaiah
Keyword(s):  
Heat Transfer ◽  
Liquid Metal ◽  
Large Eddy Simulation ◽  
Turbulent Flow ◽  
Horizontal Channel ◽  
Two Dimensional ◽  
Unsteady State ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Flow Through

Abstract Pulsation and acceleration of liquid metal turbulent flow through a horizontal channel has been numerically studied using a large eddy simulation (LES) technique. The effect of inlet pulsation and acceleration on flow and heat transfer characteristics of low Prandtl number liquid metal flow have been investigated and reported here. Results have been presented for different Reynolds numbers, different amplitudes, and frequency with constant bottom wall thickness. The flow field is modeled as unsteady-state two-dimensional incompressible turbulent-forced convection flow. Turbulence is modeled using a LES technique. Two-dimensional unsteady-state heat conduction equation is solved to know the temperature distribution in the solid region. Finite difference method solver is developed for solving the governing equations using sixth-order accuracy of compact schemes. The average Nusselt number shows cyclic variation with respect to time in pulsation flows. The enhancement of heat transfer with pulsation at amplitude 0.4 and frequency 100 Hz is 6.51%. The rate of heat transfer increases in pulsation flow compared to quasi-steady flow. The inlet acceleration shows a significant effect on flow characteristics. The present results are compared with direct numerical simulation (DNS) results available in the literature and matching well with DNS data.

Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct With Rotation: Effect of Coriolis Forces

2004 ◽  
Author(s):  
Samer Abdel-Wahab ◽  
Danesh K. Tafti
Keyword(s):  
Heat Transfer ◽  
Large Eddy Simulation ◽  
Rotation Number ◽  
Mean Flow ◽  
Heat Transfer Augmentation ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
A Value ◽  
Rotation Numbers ◽  
Large Eddy

This paper presents results from large eddy simulation (LES) of fully developed flow in a 90° ribbed duct with rib pitch-to-height ratio P/e = 10 and a rib height to hydraulic diameter ratio e/Dh = 0.1. Three rotation numbers Ro = 0.18, 0.35 and 0.67 are studied at a nominal Reynolds number based on bulk velocity of 20,000. Mean flow and turbulent quantities, together with heat transfer and friction augmentation data are presented. Turbulence and heat transfer are augmented on the trailing surface and reduced at the leading surface. The heat transfer augmentation ratio on the trailing surface asymptotes to a value of 3.7 ± 5% and does not show any further increasing trend as the rotation number increases beyond 0.2. On the other hand, augmentation ratios on the leading surface keep decreasing with an increase in rotation number with values ranging from 1.7 at Ro = 0.18 to 1.2 at Ro = 0.67. Secondary flow cells augment the heat transfer coefficient on the smooth walls by 20% to 30% over a stationary duct. An increase in rotation number from 0.35 to 0.67 decreases the frictional losses from an augmentation ratio of 9.6 to 8.75 and is a consequence of decrease in form drag and wall shear. Overall augmentation compared with a non-rotating duct ranges from +15% to +20% for heat transfer, and +10% to +15% for friction over the range of rotation numbers studied. Comparison of heat transfer augmentation with previous experimental results in the literature shows very good agreement.

Sign in / Sign up

Export Citation Format

Share Document