SUCCESS IN USING THE NATURAL GAMMA PROPERTIES OF COALS AND STONES TO GIVE AN ON-LINE MEASURE OF MINERAL CONTENT

Author(s):  
P M TAYLOR
2012 ◽  
Vol 562-564 ◽  
pp. 1947-1950
Author(s):  
Feng Ying Ma

It is crucial to measure dust concentration precisely, but it normally varies with changes of working conditions. To increase precision and on-line performance of coal dust sensor, an adaptive pattern recognition algorithm was presented. The signals of unitary angular spectrums were chosen as the adaptive eigenvector for pattern recognition and pattern bank was established in advance. Furthermore, the ratio of the sum of inner signals to that of outer signals about the diffraction angular was considered as the eigenvector of subclass pattern classification. After classification, pattern could be recognized easily and rapidly. Subsequently, number of detailed patterns within different pattern groups was increased reasonably. The errors of total coal dust and respiring coal dust decline from 6% to 2.5% and from 9% to 3%, respectively. As a result, the precision of sensor achieves 95% during the measurement. It can be concluded that the adaptive pattern recognition algorithm is effective to improve the precision and real-time performance of coal dust sensor.


2003 ◽  
Vol 129 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Montasir M. Abbas ◽  
Darcy Bullock
Keyword(s):  
On Line ◽  

Author(s):  
Rahmat Catur Wibowo ◽  
Alia Puja Pertiwi ◽  
Suci Kurniati

Northwest Java Basin (NWJB) is one of the proven hydrocarbon basins in Indonesia. The scope of this paper will focus onthe shales and sandstone interval within Y1 well in Karawang area, NWJB, Indonesia.A cored interval from Y1 well was chosen for an investigation of the clay minerology for the gamma-ray activity and with the purpose of determining how the Spectral Natural Gamma (SNG) log could be used as an indicator of source rock and reservoir quality. The Th/U as a redox indicator is used to assert that the shales are of anoxic conditions of shallow marine environments. Despite the relatively high insoluble Th values (60-74.15) ppm, the presence of U in substantial amounts, which only occurs in reducing conditions where it is preserved as a lower insoluble valence (U4+) explains for the low Th/U values ranging between (5.8-7.1) ppm/ppm. The overall Th/U value of the evaluated shales remain less than 25, where Th/U <25 is suggestive of marine sediments, whereas Th/U <4 is indicative of marine black shales of reducing conditions. Although no linear relationship was found between clay content and K, Th, or U, the K content characteristic three discrete reservoir characteristic (RC). The RC-I has predicted a matrix-supported texture with the highest K signal, illite and illitised kaolinite are roughly equal in importance as source of K. The RC-II has predicted a grain-supported texture with intermediate K content. K-feldspar, mica and illite as the main sources. The RC-III has predicted have a low K content with grain-supported texture and most of the K is hosted in feldspar. Overall, the laboratory measurements appear to be applicable to the log data, and, using SEM or XRD, the detail facies subdivision can be extended throughout the source rock and reservoir section based on the SNG log.


2011 ◽  
Vol 383-390 ◽  
pp. 5304-5308
Author(s):  
Yan Jun Zhao ◽  
Xuan Zhao ◽  
Shu Sheng Yue

A new method, triboelectricity and ultrasonic, for the soot mass flow measurement is developed. The direct rod-shaped sensor is used to measuring the triboelectricity charge and the ring sensor is used to measuring the electrostatic induction charge. The pure-triboelectricity can be figured out and the pure-triboelectricity is eliminated the influence of the electrostatic induction. Through the numerical simulation, the proportion between the electrostatic induction charge and the electrostatic induction charge is presented. The gas flowrate is measured by the ultrasonic. The soot mass flow can be figured out through the pure-triboelectricity and the gas velocity. Additionally, the sample calibration equipment based on the pure-triboelectricity and ultrasonic method is also introduced. Experimental results show the method can on-line measure the soot mass flow.


Sign in / Sign up

Export Citation Format

Share Document