A dual band circularly polarized 45° rotated rectangular slot antenna with parasitic patch

2020 ◽  
Vol 123 ◽  
pp. 153260
Author(s):  
Kapil Saraswat ◽  
A.R. Harish
Keyword(s):  
Dual Band ◽  
Slot Antenna ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Parasitic Patch

scholarly journals A Novel Dual-Band Circularly Polarized Rectangular Slot Antenna

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Biao Li ◽  
Yang Ding ◽  
Ying-Zeng Yin
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Surface Current ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Surface Current Density ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Metal Frame

A coplanar waveguide fed dual-band circularly polarized rectangular slot antenna is presented. The proposed antenna consists of a rectangular metal frame acting as a ground and an S-shaped monopole as a radiator. The spatial distribution of the surface current density is employed to demonstrate that the circular polarization is generated by the S-shaped monopole which controls the path of the surface currents. An antenna prototype, having overall dimension 37 × 37 × 1 mm3, has been fabricated on FR4 substrate with dielectric constant 4.4. The proposed antenna achieves 10 dB return loss bandwidths and 3 dB axial ratio (AR) in the frequency bands 2.39–2.81 GHz and 5.42–5.92 GHz, respectively. Both these characteristics are suitable for WLAN and WiMAX applications.

scholarly journals DUAL-BAND CPW-FED CIRCULARLY-POLARIZED SLOT ANTENNA FOR DMB/WIMAX APPLICATION

2012 ◽  
Vol 30 ◽  
pp. 185-193 ◽  
Author(s):  
Feng-Xiang Wu ◽  
Wei-Mei Li ◽  
Si-Ming Zhang
Keyword(s):  
Dual Band ◽  
Slot Antenna ◽  
Circularly Polarized

Polarization Reconfigurable Dual-Band Rectangular Slot Antenna

Frequenz ◽  
2019 ◽  
Vol 73 (9-10) ◽  
pp. 339-351
Author(s):  
Rohit Kumar Saini
Keyword(s):  
Circular Polarization ◽  
Linear Polarization ◽  
Dual Band ◽  
Slot Antenna ◽  
Pin Diodes ◽  
Rectangular Slot ◽  
Left Hand ◽  
Right Hand ◽  
Lower Band ◽  
The Senses

Abstract A novel dual-band rectangular slot antenna is presented for dual-sense reconfigurable polarization. A W-shaped microstrip feedline and two rectangular parasitic patches are used to obtain dual-band circular polarization. Further, the feedline is modified so that the senses of polarization at the two bands are opposite. By introducing PIN-diodes in the feed lines, polarization can be switched among left-hand circular polarization (LHCP), right-hand circular polarization (RHCP), and linear polarization (LP). A prototype dual-band dual-sense antenna with f01 = 1.9 GHz and f02 = 3.45 GHz is fabricated in a 1.6 mm thick FR4 substrate. The measured circular polarized bandwidths are more than 7.6 % for the lower band and 5 % for the upper band.

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

Sign in / Sign up

Export Citation Format

Share Document