Targeting Zero—preventing Surgical Site Infections by Reducing Immediate Use Steam Sterilization (IUSS) of Surgical Instruments

2021 ◽  
Vol 49 (6) ◽  
pp. S5
Author(s):  
Jill Holdsworth
Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 510
Author(s):  
Lukas Boehler ◽  
Mateusz Daniol ◽  
Ryszard Sroka ◽  
Dominik Osinski ◽  
Anton Keller

Surgical procedures involve major risks, as pathogens can enter the body unhindered. To prevent this, most surgical instruments and implants are sterilized. However, ensuring that this process is carried out safely and according to the normative requirements is not a trivial task. This study aims to develop a sensor system that can automatically detect successful steam sterilization on the basis of the measured temperature profiles. This can be achieved only when the relationship between the temperature on the surface of the tool and the temperature at the measurement point inside the tool is known. To find this relationship, the thermodynamic model of the system has been developed. Simulated results of thermal simulations were compared with the acquired temperature profiles to verify the correctness of the model. Simulated temperature profiles are in accordance with the measured temperature profiles, thus the developed model can be used in the process of further development of the system as well as for the development of algorithms for automated evaluation of the sterilization process. Although the developed sensor system proved that the detection of sterilization cycles can be automated, further studies that address the possibility of optimization of the system in terms of geometrical dimensions, used materials, and processing algorithms will be of significant importance for the potential commercialization of the presented solution.


2012 ◽  
Vol 81 (4) ◽  
pp. 231-238 ◽  
Author(s):  
S.J. Dancer ◽  
M. Stewart ◽  
C. Coulombe ◽  
A. Gregori ◽  
M. Virdi

2020 ◽  
Vol 41 (S1) ◽  
pp. s402-s402
Author(s):  
Jill Holdsworh ◽  
Zach Juno ◽  
Patty Rider ◽  
Taviana McClendon ◽  
Billy Key

Objective: To reduce the number of immediate-use steam sterilization (IUSS) cycles performed to below 2% to increase patient safety and decrease surgical site infections (SSIs). Methods: The facility decide to make a “hard stop” date at which IUSS cycles were no longer going to be allowed without operating room (OR) and Sterile Processing Department (SPD) leadership approval, based on standardized indications for IUSS cycles. Before the start date, extensive education was given to surgeons, OR clinical teams, and SPD team members to ensure understanding of the process and risk of infection due to IUSS. The facility also recognized that workflow was a large part of why instruments were being sent through IUSS cycles, due to a backup of sets in the department and because some items could not be processed before the next day. Many items were purchased to increase workflow capabilities: such as a new washer, sonic, adding a pass-through window, a low-temperature sterilizer, Also, 3 sterilizers were replaced with newer, more efficient models. The facility also purchased a large number of instruments to create new and additional trays to accommodate the surgical volume. The SPD also underwent LEAN Kaizen events on both the clean and dirty sides to improve workflow and efficiency to prevent further IUSS. Project Results: The facility saw immediately results in reduction of IUSS cycles being performed and were the department was able to drop below the goal of 2% after the first month of using the new process. The rate has continued to be <2% for >5 months. Communication and partnership between the OR, infection prevention staff, and SPD were beneficial and will continue to move the facility forward in a shared decision-making model as improvement continues in the future.Funding: NoneDisclosures: None


1981 ◽  
Vol 59 (3) ◽  
pp. 30-32 ◽  
Author(s):  
Dezso K. Merenyi ◽  
Lucy Brown ◽  
Neil S. Rothman ◽  
Robert Austin Milch ◽  
Edward M. Soffen

2003 ◽  
Vol 24 (10) ◽  
pp. 749-752 ◽  
Author(s):  
Leonard A. Mermel ◽  
Maria McKay ◽  
Jane Dempsey ◽  
Stephen Parenteau

AbstractObjective:To determine the etiology ofPseudomonas aeruginosasurgical-site infections following cardiac surgery.Setting:University teaching hospital.Patients:Those with wound cultures that grewP. aeruginosaafter cardiac surgery performed from 1999 to 2001.Methods:Medical records and operating room (OR) records of patients withP. aeruginosacardiac surgical-site infections from 1999 to 2001 were reviewed. Healthcare workers involved with two or more cases were interviewed and examined. Specimens for environmental cultures were obtained from the ORs and cardiac surgical equipment. Cardiac surgery cases were observed and postoperative care and the cleaning of surgical instruments were investigated. OR air handling system records during the epidemic period were reviewed. Molecular fingerprinting of availableP. aeruginosaisolates from infected patients and a healthcare worker was done.Results:There were fiveP. aeruginosacardiac surgical-site infections from January to August 2001, compared with no such infections from 1999 to 2000. All were adult patients. One cardiac surgeon with onychomycosis operated on all five cases. He did not routinely double glove. The involved fingernail grewP. aeruginosa.ThreeP. aeruginosapatient isolates were available for pulsed-field gel electrophoresis; two were identical to the isolate from the involved surgeon's onychomycotic nail. No environmental OR cultures grewP. aeruginosa.The surgeon's culture-positive nail was completely removed. There have been noP. aeruginosasurgical-site infections among cardiac surgery patients since this intervention.Conclusion:At least two cases of a cluster ofP. aeruginosasurgical-site infections resulted from colonization of a cardiac surgeon's onychomycotic nail.


2020 ◽  
Vol 41 (S1) ◽  
pp. s194-s195
Author(s):  
William Rutala ◽  
Maria Gergen ◽  
David Jay Weber

Background: Surgical instruments that enter sterile tissue should be sterile because microbial contamination could result in disease transmission. Despite careful surgical instrument reprocessing, surgeons and other healthcare personnel (HCP) describe cases in which surgical instruments have been contaminated with organic material (eg, blood). Although most of these cases are observed before the instrument reaches the patient, in some cases the contaminated instrument contaminates the sterile field, or rarely, the patient. In this study, we evaluated the robustness of sterilization technologies when spores and bacteria mixed with blood were placed on dirty (uncleaned) instruments. Methods: Dirty surgical instruments were inoculated with 1.5105 to 4.1107 spores or vegetative bacteria (MRSA, VRE or Mycobacterium terrae) in the presence or absence of blood. The spores used were most resistant to the sterilization process tested (eg, Geobacillus stearothermophilus for steam and HPGP and Bacillus atrophaeus for ETO). Once the inoculum dried, the instruments were placed in a peel pouch and sterilized by steam sterilization, ethylene oxide (ETO), or hydrogen peroxide gas plasma (HPGP). These experiments are not representative of practice or manufacturer’s recommendations because cleaning must always precede sterilization. Results: Steam sterilization killed all the G. stearothermophilus spores and M. terrae when inoculated onto dirty instruments in the presence or absence of blood (Table 1). ETO failed to inactivate all test spores (B. atrophaeus) when inoculated onto dirty instruments (60% failure) and dirty instruments with blood (90% failure). ETO did kill the vegetative bacteria (MRSA, VRE) under the same 2 test conditions (ie, dirty instruments with and without blood). The failure rates for HPGP for G. stearothermophilus spores and MRSA were 60% and 40%, respectively, when mixed with blood on a dirty instrument. Conclusions:This investigation demonstrated that steam sterilization is the most robust sterilization process and is effective even when instruments were not cleaned and the test organisms (G. stearothermophilus spores and MRSA) were mixed with blood. The low-temperature sterilization technologies tested (ie, ETO, HPGP) failed to inactivate the test spores but ETO did kill the test bacteria (ie, MRSA, VRE). These findings should assist HCP to assess the risk of infection to patients when potentially contaminated surgical instruments enter the sterile field or are unintentionally used on patients during surgery. Our data also demonstrate the importance of thorough cleaning prior to sterilization.Funding: NoneDisclosures: Dr. Rutala was a consultant to ASP (Advanced Sterilization Products)


1981 ◽  
Vol 42 (2) ◽  
pp. 383-384 ◽  
Author(s):  
Robert E. Perkins ◽  
H. A. Bodman ◽  
Ruth B. Kundsin ◽  
Carl W. Walter

2020 ◽  
pp. 175717742097375
Author(s):  
Maria Qvistgaard ◽  
Sofia Almerud-Österberg ◽  
Jenny Lovebo

Background: Surgical site infections (SSI) constitute a severe threat to surgery patients. The surgical environment must be as free of contaminating microorganisms as possible. Using sterile surgical instruments while performing surgery is an absolute necessity for ensuring quality of care in perioperative settings. Aim: To compare bacterial contamination of agar plates after 15 h on set surgical instrument tables covered with a single- or double-layer drape. Methods: An experimental design was used consisting of set instrument tables with six agar plates on each table: four instrument tables were covered with a single-layer drape and four instrument tables were covered with a double-layer drape. This set-up was repeated on nine occasions during the period of data collection, making 76 set instrument tables in total. As a control, one instrument table was uncovered on four of those occasions. Results: The double-layer drape cover showed a significantly ( P = 0.03) lower number of colony forming units (CFU) per agar plate than the single-layer drape covering. As expected, the uncovered instrument tables were highly contaminated. Discussion: Our results indicate that it is good practice to cover instruments properly with at least a single-layer drape before a surgical procedure. If there is difficulty achieving optimal conditions while setting the instrument tables (e.g. positioning the patient for general anaesthesia), it is a better option to set the instrument tables earlier and cover them with a double-layer drape. These precautions will help protect the patient from harm and unnecessary SSI by lowering microbiological burden, a key factor in developing SSI.


2015 ◽  
Vol 36 (8) ◽  
pp. 990-992 ◽  
Author(s):  
Camille Fayard ◽  
Christophe Lambert ◽  
Catherine Guimier-Pingault ◽  
Marion Levast ◽  
Raphaelle Germi

AbstractGood sterilization practices include discarding items containing residual moisture after steam sterilization. In this small laboratory study, however, the presence of residual water did not appear to compromise the sterility of surgical instruments in 2 commonly used types of packaging during routine storage after steam sterilization.Infect Control Hosp Epidemiol 2015;36(8):990–992


Sign in / Sign up

Export Citation Format

Share Document