scholarly journals Sensors in the Autoclave-Modelling and Implementation of the IoT Steam Sterilization Procedure Counter

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 510
Author(s):  
Lukas Boehler ◽  
Mateusz Daniol ◽  
Ryszard Sroka ◽  
Dominik Osinski ◽  
Anton Keller
Keyword(s):  
The Body ◽  
Surgical Instruments ◽  
Sensor System ◽  
Temperature Profiles ◽  
Measured Temperature ◽  
Steam Sterilization ◽  
Automated Evaluation ◽  
Normative Requirements ◽  
Thermal Simulations ◽  
The Relationship

Surgical procedures involve major risks, as pathogens can enter the body unhindered. To prevent this, most surgical instruments and implants are sterilized. However, ensuring that this process is carried out safely and according to the normative requirements is not a trivial task. This study aims to develop a sensor system that can automatically detect successful steam sterilization on the basis of the measured temperature profiles. This can be achieved only when the relationship between the temperature on the surface of the tool and the temperature at the measurement point inside the tool is known. To find this relationship, the thermodynamic model of the system has been developed. Simulated results of thermal simulations were compared with the acquired temperature profiles to verify the correctness of the model. Simulated temperature profiles are in accordance with the measured temperature profiles, thus the developed model can be used in the process of further development of the system as well as for the development of algorithms for automated evaluation of the sterilization process. Although the developed sensor system proved that the detection of sterilization cycles can be automated, further studies that address the possibility of optimization of the system in terms of geometrical dimensions, used materials, and processing algorithms will be of significant importance for the potential commercialization of the presented solution.

The use of Body Surface Index as a Better Clinical Health indicators Compare to Body Mass Index and Body Surface Area for Clinical Application

2018 ◽  
pp. 131-136
Author(s):  
Shirazu I. ◽  
Theophilus. A. Sackey ◽  
Elvis K. Tiburu ◽  
Mensah Y. B. ◽  
Forson A.
Keyword(s):  
Surface Area ◽  
Body Surface Area ◽  
Clinical Application ◽  
Body Surface ◽  
Body Height ◽  
Health Indicators ◽  
The Body ◽  
Body Parameters ◽  
The Relationship ◽  
Individual Body

The relationship between body height and body weight has been described by using various terms. Notable among them is the body mass index, body surface area, body shape index and body surface index. In clinical setting the first descriptive parameter is the BMI scale, which provides information about whether an individual body weight is proportionate to the body height. Since the development of BMI, two other body parameters have been developed in an attempt to determine the relationship between body height and weight. These are the body surface area (BSA) and body surface index (BSI). Generally, these body parameters are described as clinical health indicators that described how healthy an individual body response to the other internal organs. The aim of the study is to discuss the use of BSI as a better clinical health indicator for preclinical assessment of body-organ/tissue relationship. Hence organ health condition as against other body composition. In addition the study is `also to determine the best body parameter the best predict other parameters for clinical application. The model parameters are presented as; modeled height and weight; modelled BSI and BSA, BSI and BMI and modeled BSA and BMI. The models are presented as clinical application software for comfortable working process and designed as GUI and CAD for use in clinical application.

CONCEPTUALISING RISK CULTURE ON ERM IMPLEMENTATION IN CONSTRUCTION COMPANIES

2020 ◽  
Vol 17 (1) ◽  
pp. 59
Author(s):  
Ching Ching Wong
Keyword(s):  
Risk Management ◽  
Risk Identification ◽  
The Body ◽  
Risk Indicators ◽  
Construction Companies ◽  
Risk Appetite ◽  
Risk Culture ◽  
Risk Treatment ◽  
Managing Risk ◽  
The Relationship

Enterprise Risk Management (ERM) is an effective technique in managing risk within an organization strategically and holistically. Risk culture relates to the general awareness, attitudes and behaviours towards risk management in an organisation. This paper presents a conceptual model that shows the relationship between risk culture and ERM implementation. The dependent variable is ERM implementation, which is measured by the four processes namely risk identification and risk assessment; risk treatment; monitor and consult; communicate and consult. The independent variables under risk culture are risk policy and risk appetite; key risk indicators; accountability; incentives; risk language and internal relationships. This study aims to empirically test the relationship between risk culture and ERM implementation among Malaysian construction public listed companies. Risk culture is expected to have direct effects and significantly influence ERM. This study contributes to enhance the body of knowledge in ERM especially in understanding significant of risk culture that influence its’ implementation from Malaysian perspective.

The Sterility of Reusable Surgical Instruments with Pouches Packaging on One of the Private Hospital in Bandung

2017 ◽  
Vol 8 (2) ◽  
Author(s):  
Kurniawansyah I. S. ◽  
Mita S. R. ◽  
Najla E. ◽  
Nindayani E.
Keyword(s):  
Storage Time ◽  
Private Hospital ◽  
Surgical Instruments ◽  
Healthcare Associated Infection ◽  
Sterility Testing ◽  
Reusable Instruments ◽  
Healthcare Associated ◽  
The Relationship ◽  
Common Infection ◽  
Long Storage

Healthcare associated infection is one of the common infection that happens in Indonesia. One form control to prevent healthcare associated infection is the sterilization process of the materials and medical instruments that used for taking care of patients. At the private hospital whereas a place of research, there’s never been done the study of sterility test for reusable instrument with pouches, based on previous studies showed that 8 sets from 40 sets of reusable instrument with linen were not sterile moreover there were positively influence from the amount of time to the sterility of reusable instrument. The purpose of these studies was to determining the relationship between a long storage time and the sterility of reusable instruments with pouches. The method that used in this study was the sterility testing of reusable instrument with pouches which were stored in a central operations room storage with a long storage time of 1 and 2 months. From 30 reusable instruments with pouches which were stored for nine months there were 5 instruments were not sterile. The results of statistic analysis showed that the amount of storage time not significantly associated to the sterility of reusable instrument with pouches in the operating room central storage space.

Structural Mediation Model of Information System and Sustainable Performance of UAE Manufacturing Sector

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Mohamed Ahmed Darwish Abdulla Larii ◽  
◽  
Fatma Ahmed Lari ◽  
Mohamed Ahmed Darwish Abdulla Lari ◽  
◽  
...  
Keyword(s):  
Information System ◽  
Manufacturing Sector ◽  
Organisational Culture ◽  
The Body ◽  
Mediating Effect ◽  
Operational Performance ◽  
Manufacturing Companies ◽  
Mediation Model ◽  
Sustainable Performance ◽  
The Relationship

This study intends to find out the mediating effect of organisational culture on the relationship between information system and sustainable performance of manufacturing sector in UAE. This study used AMOS-SEM software to develop mediation model that linking the mediating relationships between Information System, Organisational Culture and Sustainable operation Performance. Data was collected through questionnaire survey among the operation staff of Abu Dhabi manufacturing companies. A total 250 questionnaires were distributed however 205 were returned and only 200 are valid which indicates a response rate of 80%. The analysis found that TPS has positive but not significant effect to SP; OIS has positive but not significant effect to SP; FMW has a positive and significant effect on SP; SDS has a negative and not significant effect to SP and SP has positive but not significant effect OC. For the path relationship between the four exogenous variables (TPS, OIS, SDS, and FMW) and the mediator variable (OC), the results are TPS has positive and significant effect to OC; OIS has positive but not significant effect to OC; FMW has positive and significant effect to OC and SDS has positive and not significant effect to OC. Collectively, the five exogenous constructs (TPS, OIS, SDS, FMW and OC) explained 89% variation in operational performance and 86% of the variation in organisational culture. However, for a mediator, it was found that OC has no significant mediating effect on the relationship between TPS and SP; OC has no significant mediating effect on the relationship between OIS and SP; OC has no significant mediating effect on the relationship between SDS and SP and OC has no significant mediating effect on the relationship between FMW and SP. it can be concluded that there is a positive relationship between information system dimensions and operational performance. However organizational culture has no contributing any mediating effect to the relationship. These findings have contributed to the body of knowledge and could be shared among the UAE manufacturing practitioners.

Study of the infl uence of information and communication tools on the psychophysiological state of schoolchildren on the basis of subjective evaluation

2020 ◽  
pp. 47-55
Author(s):  
Aleksandra Rakhmanova ◽  
Georgiy Loginov ◽  
Vladimir Dolich ◽  
Nataliya Komleva ◽  
Galina Rakhmanova
Keyword(s):  
High School ◽  
Emotional State ◽  
Statistical Significance ◽  
Subjective Evaluation ◽  
Educational Process ◽  
The Body ◽  
Leningrad Region ◽  
Communication Tools ◽  
Information And Communication ◽  
The Relationship

The relevance of the article is determined by the existence of contradictions between the need to introduce innovative technologies into the educational process at school, as an integral attribute of modern education, and the negative influence of factors on the physical and psycho-emotional state of health of students related to the use of information and communication tools (computers, phones, headphones). The goal of the study was to assess the relationship between the timing of the use of information and communication tools and the frequency of functional and psycho-emotional complaints in groups of middle and high school schoolchildren. 400 schoolchildren of the Saratov Region, the Moscow Region, Leningrad Region and the Republic of Dagestan were surveyed, who made up two groups of research: middle-school schoolchildren (grades 5–6) and high-school schoolchildren (grades 10–11 The survey was carried out by means of the standardized formalized cards which included the questions considering usage time of computers and mobile phones, complaints to a headache, hands pain, other pain and/or feeling of discomfort from visual organ and the organs of hearing, as well as a psycho-emotional state. Statistical analysis of the data was performed using the STATISTICA application software program by StatSoft Inc (USA). To compare the frequencies of a binary feature, a fourfold table of absolute frequencies was constructed and the level of statistical significance for the exact Fisher’s two-tailed test criterion was determined. The study was conducted according to the requirements of bioethics, after signing informed consent statement by teenagers and their parents. The study examined the relationship between the timing of the use of information and communication tools and the frequency of complaints in groups of schoolchildren. The results of the study should be taken into account when developing and implementing preventive measures to prevent negative effects of computers and mobile devices on the body of students.

EXPERIMENTAL ASSESSMENT OF THE NANOPARTICLES TOXICITY OF NICKEL OXIDE IN TWO SIZES IN THE SUBCHRONIC EXPERIMENT

2018 ◽  
pp. 30-35
Author(s):  
M.P. Sutunkova ◽  
B.A. Katsnelson ◽  
L.I. Privalova ◽  
S.N. Solovjeva ◽  
V.B. Gurvich ◽  
...  
Keyword(s):  
Nickel Oxide ◽  
Nervous Activity ◽  
Equal Mass ◽  
The Body ◽  
Subchronic Toxicity ◽  
Physiological Mechanisms ◽  
Nickel Oxide Nanoparticles ◽  
The Relationship ◽  
The Brain ◽  
Nanoparticles Toxicity

We conducted a comparative assessment of the nickel oxide nanoparticles toxicity (NiO) of two sizes (11 and 25 nm) according to a number of indicators of the body state after repeated intraperitoneal injections of these particles suspensions. At equal mass doses, NiO nanoparticles have been found to cause various manifestations of systemic subchronic toxicity with a particularly pronounced effect on liver, kidney function, the body’s antioxidant system, lipid metabolism, white and red blood, redox metabolism, spleen damage, and some disorders of nervous activity allegedly related to the possibility of nickel penetration into the brain from the blood. The relationship between the diameter and toxicity of particles is ambiguous, which may be due to differences in toxicokinetics, which is controlled by both physiological mechanisms and direct penetration of nanoparticles through biological barriers and, finally, unequal solubility.

Correction of Posture Deviations in the Sagittal Plane Using the Pilates Method

2019 ◽  
pp. 3-13
Author(s):  
Alexandru Cîtea ◽  
George-Sebastian Iacob
Keyword(s):  
Low Back Pain ◽  
Back Pain ◽  
Postural Control ◽  
Human Body ◽  
Sagittal Plane ◽  
The Body ◽  
Lower Limbs ◽  
Low Back ◽  
Pilates Method ◽  
The Relationship

Posture is commonly perceived as the relationship between the segments of the human body upright. Certain parts of the body such as the cephalic extremity, neck, torso, upper and lower limbs are involved in the final posture of the body. Musculoskeletal instabilities and reduced postural control lead to the installation of nonstructural posture deviations in all 3 anatomical planes. When we talk about the sagittal plane, it was concluded that there are 4 main types of posture deviation: hyperlordotic posture, kyphotic posture, rectitude and "sway-back" posture.Pilates method has become in the last decade a much more popular formof exercise used in rehabilitation. The Pilates method is frequently prescribed to people with low back pain due to their orientation on the stabilizing muscles of the pelvis. Pilates exercise is thus theorized to help reactivate the muscles and, by doingso, increases lumbar support, reduces pain, and improves body alignment.

Substantiation the machine with a basket for the application of mineral fertilizers and other bulk materials with the upper arrangement of the feeding device

2019 ◽  
pp. 37-43
Author(s):  
Fesenko, H.
Keyword(s):  
Fat Body ◽  
Mineral Fertilizer ◽  
The Body ◽  
Mineral Fertilizers ◽  
Analytical Mechanics ◽  
Bulk Materials ◽  
The Stability ◽  
Working Bodies ◽  
The Relationship ◽  
Stable Flow

Purpose. Increasing the uniformity of distribution of mineral fertilizers and other bulk materials due to the stability of their feed from the body to the spreading working bodies using the top feeder. Methods. The following methods are used to achieve this aim: the method of comparing the differences between individual groups of fertilizers, the method of analyzing the properties of a new technical system, the method of functional inventiveness, and the methods of theoretical and analytical mechanics. Results. The traction body of the conveyor of the upper feed of the body fat body machine for mineral fertilizers and other bulk materials was substantiated and the relationship between the height of its scrapers and the distance between them was established, as well as the nature of the mineral fertilizer pressure on the curvilinear wall of the body. In addition, the design of the advanced body fertilizer spreader is justified, which ensures a stable flow of fertilizers from the body due to the improvement of the top feeder. Conclusions. Because of the conducted researches, the advantages of machines equipped with top feeder are found. They create the conditions for the forced feeding mineral fertilizers and other loose materials from the container to the distribution bodies, which is a prerequisite for their evenness on the surface. With this, the imperfection of known machines with the top feeder constrains their introduction into agricultural production. On this account, a more thoroughly constructed solution of the body feeder of the top feed is substantiated, in which the conveyor provides a stable supply of fertilizers from the body with reduced energy consumption during operation. Keywords: analysis, feed, upper device, conveyor, stability, fertilizers, flow ability, body.

THE RELATIONSHIP OF MASS OF THE BODY, FISHERY LENGTH AND THE FISH – PRODUCTIVITY OF ONE-YEARS OF PIKEPERCH BY THE BREEDING THEM IN PONDS FOR CARPS

2017 ◽  
Vol 59 (2) ◽  
pp. 014-021
Author(s):  
Saya K. Koyshibaeva ◽  
◽  
Shokhan A. Alpeyisov ◽  
Evgeniy V. Fedorov ◽  
Nina S. Badryzlova ◽  
...  
Keyword(s):  
The Body ◽  
Relationship Of ◽  
The Relationship ◽  
Fish Productivity

Epilogue

2017 ◽  
Author(s):  
Joshua S. Walden
Keyword(s):  
The Body ◽  
The Self ◽  
The Individual ◽  
Relationship Of ◽  
The Relationship

The book’s epilogue explores the place of musical portraiture in the context of posthumous depictions of the deceased, and in relation to the so-called posthuman condition, which describes contemporary changes in the relationship of the individual with such aspects of life as technology and the body. It first examines Alfred Hitchcock’s Vertigo to view how Bernard Herrmann’s score relates to issues of portraiture and the depiction of the identity of the deceased. It then considers the work of cyborg composer-artist Neil Harbisson, who has aimed, through the use of new capabilities of hybridity between the body and technology, to convey something akin to visual likeness in his series of Sound Portraits. The epilogue shows how an examination of contemporary views of posthumous and posthuman identities helps to illuminate the ways music represents the self throughout the genre of musical portraiture.

Sign in / Sign up

Export Citation Format

Share Document