The performance of a commercial FCC catalyst (designated as CY) and a physically mixed hybrid catalyst (80 wt.% CY and 20 wt.% HZSM-5-based catalyst, designated as CH) have been compared in the catalytic cracking of a vacuum gasoil (VGO)/bio-oil blend (80/20 wt.%) in a simulated riser reactor (C/O, 6gcatgfeed−1; t, 6 s). The effect of cracking temperature has been studied on product distribution (carbon products, water, and coke) and product lumps: CO+CO2, dry gas, liquified petroleum gases (LPG), gasoline, light cycle oil (LCO), heavy cycle oil (HCO), and coke. Using the CH catalyst, the conversion of the bio-oil oxygenates is ca. 3 wt.% higher, while the conversion of the hydrocarbons in the mixture is lower, yielding more carbon products (83.2–84.7 wt.% on a wet basis) and less coke (3.7–4.8 wt.% on a wet basis) than the CY catalyst. The CH catalyst provides lower gasoline yields (30.7–32.0 wt.% on a dry basis) of a less aromatic and more olefinic nature. Due to gasoline overcracking, enhanced LPG yields were also obtained. The results are explained by the high activity of the HZSM-5 zeolite for the cracking of bio-oil oxygenates, the diffusional limitations within its pore structure of bulkier VGO compounds, and its lower activity towards hydrogen transfer reactions.
A Hybrid FCC/HZSM-5 Catalyst for the Catalytic Cracking of a VGO/Bio-Oil Blend in FCC Conditions