Experimental investigation of heat transfer enhancement using ionic liquid- Al2O3 hybrid nanofluid in a cylindrical microchannel heat sink

2021 ◽  
pp. 116879
Author(s):  
Amir Heidarshenas ◽  
Zoha Azizi ◽  
S.M. Peyghambarzadeh ◽  
S. Sayyahi
Keyword(s):  
Heat Transfer ◽  
Experimental Investigation ◽  
Ionic Liquid ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Hybrid Nanofluid ◽  
Microchannel Heat Sink ◽  
Transfer Enhancement ◽  
Cylindrical Microchannel

Heat transfer enhancement in microchannel heat sink using hybrid technique of ribs and secondary channels

2017 ◽  
Vol 114 ◽  
pp. 640-655 ◽  
Author(s):  
Ihsan Ali Ghani ◽  
Nor Azwadi Che Sidik ◽  
Rizal Mamat ◽  
G. Najafi ◽  
Tan Lit Ken ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Hybrid Technique ◽  
Microchannel Heat Sink ◽  
Transfer Enhancement

Enhanced Thermal Transport in Microchannel Using Oblique Fins

2012 ◽  
Vol 134 (10) ◽  
Author(s):  
Y. J. Lee ◽  
P. S. Lee ◽  
S. K. Chou
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Sinks ◽  
Maximum Temperature ◽  
Working Fluid ◽  
Microchannel Heat Sink ◽  
Transfer Enhancement ◽  
Microchannel Heat Sinks

Sectional oblique fins are employed, in contrast to continuous fins in order to modulate the flow in microchannel heat sinks. The breakage of a continuous fin into oblique sections leads to the reinitialization of the thermal boundary layer at the leading edge of each oblique fin, effectively reducing the boundary layer thickness. This regeneration of entrance effects causes the flow to always be in a developing state, thus resulting in better heat transfer. In addition, the presence of smaller oblique channels diverts a small fraction of the flow into adjacent main channels. The secondary flows created improve fluid mixing, which serves to further enhance heat transfer. Both numerical simulations and experimental investigations of copper-based oblique finned microchannel heat sinks demonstrated that a highly augmented and uniform heat transfer performance, relative to the conventional microchannel, is achievable with such a passive technique. The average Nusselt number, Nuave, for the copper microchannel heat sink which uses water as the working fluid can increase as much as 103%, from 11.3 to 22.9. Besides, the augmented convective heat transfer leads to a reduction in maximum temperature rise by 12.6 °C. The associated pressure drop penalty is much smaller than the achieved heat transfer enhancement, rendering it as an effective heat transfer enhancement scheme for a single-phase microchannel heat sink.

Sign in / Sign up

Export Citation Format

Share Document